Related Manuals for Cisco WIP320
Summary of Contents for Cisco WIP320
- Page 1 USER GUIDE Cisco Small Business Cisco SPA300 Series and SPA500 Series IP Phones with Cisco Unified Communications UC320W Phone Models: SPA301, SPA303, SPA501G, SPA502G, SPA504G, SPA508G, SPA509G, SPA525G, SPA525G2...
- Page 2 Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
-
Page 3: Table Of Contents
Using a Hot Phone Using a Paired Phone Using the Intercom and Paging Features Transferring Calls Viewing and Returning Missed Calls Forwarding All Calls Setting Do Not Disturb Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 4 Pairing Your Cisco SPA 525G2 with a Bluetooth-Enabled Mobile Phone Initiating Pairing from the Cisco SPA 525G2 Initiating Pairing from Your Bluetooth-Enabled Mobile Phone Importing Your Mobile Phone Address Book into the Cisco SPA 525G2 Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
- Page 5 Appendix A: Using an Analog Phone with the Cisco UC320W Basic Calling Functions on Analog Phones Using Star Codes for Special Features on Analog Phones Appendix B: Where to Go From Here Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 6: Chapter 1: Getting Started
Getting Started This guide provides information to help you use your Cisco Small Business IP Phone with the Cisco Unified Communications UC320W. Before using your phone, read this chapter to become familiar with the phone features. Refer to these topics: •... -
Page 7: Overview Of The Cisco Small Business Ip Phones
To clean the equipment, use a slightly moistened paper or cloth towel. Do not spray or pour cleaning solution directly onto the hardware unit. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 8: Phone Features
4 dynamic Navigation None Four-way navigation Four-way Button navigation with center Select button Capable Cisco SPA509G has eight buttons around the screen and four buttons with paper labels. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 9: Phone Components Of Cisco Spa301
Red (slow flashing): You have a call on hold. • Red (series of two fast flashes): Your phone has temporarily lost its Ethernet connection. (continues on the following page) Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 10 After the other phone starts ringing, wait for an answer or immediately press to complete the FLASH transfer. Redial button Press to redial the last number called. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 11: Phone Components Of Cisco Spa303 And Cisco Spa500 Series Models
(when the handset is off the phone) or ringer volume (when the handset is on the phone). Keypad May be used to enter numbers. Phone Components of Cisco SPA303 and Cisco SPA500 Series Models Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 12 Perform specified tasks, as configured by your Feature Buttons for phone administrator. The color indicates the status. Cisco SPA509G Paper labels are provided. For more information, Using Your Line Buttons, page Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
- Page 13 Press + to increase the volume, or press - to decrease the volume. Headset button When selected (steady green), uses the headset as the audio device for a call. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 14: Cisco Spa500S Attendant Console
Cisco SPA500S Attendant Console The Cisco SPA500S attendant console attaches to a Cisco SPA500 Series IP phone to provide additional feature buttons. Up to two 32-button units can be attached to a phone to provide a total of 64 feature buttons. -
Page 15: Connecting Wired And Wireless Headsets (Optional)
To enable Bluetooth: Cisco SPA525G/G2 1. Press 2. Select User Preferences. 3. Select Bluetooth Configuration. 4. Press the right-arrow navigation button to turn Bluetooth On. 5. Press Save Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 16 8. Scroll to PIN and enter the PIN for your Bluetooth headset. 9. Scroll to Connect Automatically and press the right-arrow navigation button to select On. 10. Press Connect Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 17: Using Softkeys To Handle Calls
Line. Conf To end the conference for everyone, press End Call hang up. To exit the conference and allow the other callers to continue the call, press Join Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 18 Displays the Missed Calls list. Use the navigation button to select a call, and then press Dial New Call After placing a call on hold, press this softkey to place a new call. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
- Page 19 For an immediate transfer, wait for the other phone to ring, and then press this softkey again. • For an attended transfer, wait for an answer, announce the call, and then press this softkey. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 20: Using Your Line Buttons
NOTE “Using the Feature Buttons” section on page 21). Not available on Cisco SPA301 and Cisco SPA502G. These phones have a personal extension only. Extensions An extension is an internal number at your site. Your phone may have line buttons for personal extensions and shared extensions. -
Page 21: Status Indicators
IP phone with the same park slot button, for example, Park Slot 2. Alternatively, unpark the call from any IP phone by pressing . When Unpark prompted, enter the specified park slot number, and then press Dial Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 22 This is a blind transfer, with no opportunity to talk to the other party or to cancel the transfer. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 23: Entering And Editing Characters
If you need to change the mode, use these Cisco SPA50xG models softkeys: • Num: numeric • Alpha: alphanumeric Note: You may need to press the right-arrow or left- arrow button to see these options. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 24 Enter your changes, and then press Edit . To place the call, press Dial • On SPA525G/G2, press nter your EditDial changes and then press to place the Dial call. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 25: Using The Setup Menu
Enter the number of the menu option. by entering a number on Example: In this example, press to select the keypad Network. Setup Voice Mail Network Product Info Status select cancel Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 26: Chapter 2: Using Basic Phone Functions
• Using the Voicemail System, page 58 Before using this chapter, read Chapter 1, “Getting Started” to become familiar NOTE with the phone components, softkeys, and line/feature buttons. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 27: Choosing An Audio Device
Switching from the Not available on Cisco SPA301 handset to a headset Press and verify that the button is lit. Place the during a call handset on the hook. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 28 See the user documentation for your Bluetooth headset for more information. For more options with Cisco SPA525G2, see Using the Cisco SPA 525G2 With Your Bluetooth- Enabled Mobile Phone, page Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 29: Adjusting Volume And Muting
Other models: Press + on the Volume button to increase the ringer volume, or press - to decrease the ringer volume. Optionally, press to save this setting for future calls Save (not available Cisco SPA501G). Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 30: Placing, Answering, And Managing Calls
• Answering, Diverting, and Ending Calls, page 33 • Managing Multiple Calls, page 34 • Using a Hot Phone, page 35 • Using a Paired Phone, page 36 Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 31: Placing A Call
Dial from a personal extension (if allowed): Enter the access code, such as . Enter the phone number, including any long-distance prefix required by your phone service. Check with your phone administrator for details. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 32 Not available on Cisco SPA301 or Cisco SPA501G Directory Using the Phone Directories, page Dialing from the Call Not available on Cisco SPA301 or Cisco SPA501G History list Using the Call History Lists, page Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 33: Answering, Diverting, And Ending Calls
(if configured). Resuming a call on hold Cisco SPA301 Press twice. FLASH Cisco SPA502G Press Resume All other models Press the flashing line button. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 34: Managing Multiple Calls
If you are on a call and receive a new call, press to to toggle between two place the first call on hold and answer the new call. calls To Toggle between the two calls, press FLASH Cisco SPA301 twice. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 35: Using A Hot Phone
• Use the handset: Lift it off hook. • Use the phone speaker (if available on the phone model): Press • Use a headset (if applicable): Press Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 36: Using A Paired Phone
IP phone: • Basic phone functions are the same on both phones. You can resume a held call from either phone. On Cisco SPA phones, the phone button lights show the status of calls. For more information, see Status Indicators, page •... -
Page 37: Using The Intercom And Paging Features
Groups Directory to find and dial the number. For more information, see Using the Phone Directories, page You have one-way audio to make the announcement through the external speaker. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 38 5. Press the right-arrow or left-arrow navigation button to select a check mark to enable this feature or a minus sign (-) sign to disable this feature. 6. Press Save Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 39: Transferring Calls
For external numbers, include the digit required to get an outside line (except on shared lines). 3. When the other party answers, announce the call, and then hang up. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 40 Line Monitor button extension. This is an immediate blind transfer, with (if configured) no opportunity to talk to the other party or to cancel the transfer. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 41: Viewing And Returning Missed Calls
Missed Calls. 2. To return a call, scroll to the call. Then press Dial Note: You can edit a number before dialing. Editing an entry before dialing, page Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 42 2. Select User Preferences. 3. Select Call Preferences. 4. Select Miss Call Shortcut. 5. Press the right-arrow or left-arrow navigation button to turn this feature On or Off. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 43: Forwarding All Calls
The display screen displays Calls Forwarded. All incoming calls will be forwarded to the specified number. Disabling Call Forward Press -Cfwd Clr Fwd All by using the softkey Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 44: Setting Do Not Disturb
3. Select Call Preferences. Cisco SPA525G/G2 4. Select Do Not Disturb. 5. Press the right-arrow or left-arrow navigation button to turn this feature On or Off. 6. Press Save Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 45: Enabling Or Disabling Call Waiting
2. Select User Preferences. Cisco SPA525G/G2 3. Select Call Preferences. 4. Select Call Waiting. 5. Press the right-arrow or left-arrow navigation button to turn this feature On or Off. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 46: Picking Up A Call For Another Extension
If your phone is configured with an Individual Pickup a button on your phone button, Phone Monitor button, or Line Monitor button for another user, press the button to pick up a ringing call. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 47: Parking A Call
2. Select Call Park Status. The phone displays information for all parked calls. 3. Scroll to the call that you want to unpark, and then press . The call is connected. Unpark Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 48 1. • Lift the receiver on any IP phone, and enter * 3 9 . At the tone, press the park slot number followed by Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 49: Creating A Three-Way Conference Call
Press a line button to select a held call. Ending a conference call Hang up. All parties are disconnected. for all parties Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 50: Using The Phone Directories
Personal Address Book: Select this option to view, maintain, and place calls to your personal contacts. • Corporate Directories: Select this option to open a directory that includes all extensions and groups in the system. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 51: Using Your Contact List (Personal Address Book)
Placing a call to a 1. Scroll to the contact that you want to call. personal contact 2. Press Dial Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 52 Select Ring Tone screen. Scroll through the ring tones. Press to play a selected ringtone. Press Play to assign the selected ringtone to this Select contact. 5. Press Save Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
- Page 53 , select Paste, and then press Option Select 4. Edit the name, number, and ring tone as needed. See the editing instructions in this table. 5. Press Save Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 54: Using The Corporate Directories
2. Answered Calls: Caller ID information for the calls that were received recently on this phone. 3. Missed Calls: Caller ID information for calls that rang this phone but were unanswered. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 55 2. If needed, edit the name, number, or ring tone. For editing instructions, see Using Your Contact List (Personal Address Book), page 3. Press Save Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 56: Setting Or Changing A Phone Password
2. Select Logout (the last option in the list). While logged out, you can place calls, but you will be prompted for a password if you attempt to access the directory, call history, or user preferences. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 57 Note: The password field is an alpha-numeric field. Refer to the display to see which characters are available. Press a key multiple times until the desired character is selected. Pause to enter the selected character. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 58: Using The Voicemail System
Press * to exit. • When you have new or saved messages, other options are available. See Options to play messages:, page 60 Options to manage your messages:, page Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 59: Accessing Voicemail
VM and the name of the group or line. programmed for your 2. Press phone) 3. Enter the password (default 12345), followed by . (If the mailbox is not yet set up, follow the prompts.) Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 60: Voicemail Options
Then press # or hang up to exit. • When pressed from the menu: Repeats the message from the beginning. • When pressed during playback: Rewinds the message. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 61 Press 1 to play new messages, or press 3 to play old messages (available if you previously saved a message). Then use the following options: Press Save the message. Delete the message. Mark an old (saved) message as new. Listen to Help. Exit. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
- Page 62 Press 2 to delete it. Change your password. Enter your password and press #. Then re- enter it and press #. Listen to Help. Return to the main menu. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 63: Chapter 3: Using Advanced Phone Features
Connecting a Cisco SPA525 Model Phone to the Wireless Voice Network, page 80 • Using the Cisco SPA 525G2 With Your Bluetooth-Enabled Mobile Phone, page 81 • Changing the System Time Settings, page 89 Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 64: Configuring Privacy Features
Using Advanced Phone Features Configuring Privacy Features Configuring Privacy Features Also see Using Star Codes on Cisco IP Phones, page For Cisco SPA301 and SPA501G, you can configure these features only by using the star codes. Task Instructions Blocking or allowing... - Page 65 5. Press the right-arrow navigation button to enter a check mark (anonymous calls are blocked) or to clear the check mark (anonymous calls are allowed). 6. Press Save Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 66: Enabling And Using Dial Assistance
2. Press the navigation button to scroll down. 3. When a number is selected, press Dial complete the call. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 67: Creating And Using Personal Speed Dials
1. Lift the handset, press , or press a line button (if applicable). 2. Press your personal speed dial button to place a call to the specified number. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 68 Using a numeric speed 1. Press dial by using the Setup 2. Select the Speed Dial option. button 3. Scroll to the number that you want to dial. 4. Press Dial Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 69: Adjusting Your Display Screen
3. Select Screen Preferences. 4. Scroll to Display Brightness. The default contrast is 15. 5. Enter a number between 1 (lowest) and 15 (greatest) to change the brightness. 6. Press Save Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 70 3. Select Screen Preferences. 4. Scroll to Backlight Timer (sec). The default delay is 30 seconds. 5. Enter the number of seconds to display the backlight. 6. Press Save Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 71: Configuring The Phone Screen Saver
Edit 4. Enter the time, in seconds, to wait before the screen saver starts. 5. Press , and then press Save 6. Press to close the menu. Cancel Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 72 Screen Saver Settings menu. 6. Press the down-arrow navigation button to select Trigger Interval (sec). 7. Enter the time, in seconds, to wait before the screen saver starts. 8. Press Save Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
- Page 73 6. Press to close the menu. Cancel Note: To view the selected option, follow the instructions for Enabling your screen saver immediately (if enabled) Cisco SPA50xG models only. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
- Page 74 1. Press saver immediately (if 2. Scroll to Screen Saver Mode, and then press enabled) . The screen saver appears on the phone Activ Cisco SPA50xG models screen. only Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 75: Customizing The Ring Tones For Your Extensions
5. Scroll through the ring tones. Press Play play the selected ring tone. Press Select choose the ringtone. 6. Press Save Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 76: Using Star Codes On Cisco Ip Phones
Press and then enter the code. For some codes, you may need to press Dial to continue (not required on Cisco SPA301 or Cisco SPA501G). For some codes, additional prompts will appear (or a tone will play on Cisco SPA301 or Cisco SPA501G). For more information, refer to the following table. - Page 77 Be aware that this setting will prevent your calls from reaching recipients who block anonymous calls. Unblock Caller ID. Call the last number that called your phone. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
- Page 78 This feature is active until you disable it. Note: If a phone is not set up to auto-answer pages, the call will ring as a normal voice call. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 79: Using The Interactive Voice Response Menu On Cisco Spa301 And Cisco Spa501G
Using Advanced Phone Features Using the Interactive Voice Response Menu on Cisco SPA301 and Cisco SPA501G Enter: To do this: Notes Perform a blind transfer. You will be prompted on the screen (or with a tone on Cisco SPA301 and Cisco SPA501G). -
Page 80: Connecting A Cisco Spa525 Model Phone To The Wireless Voice Network
Connecting a Cisco SPA525 Model Phone to the Wireless Voice Network If the phone administrator enabled a wireless voice network, you can use Cisco SPA525G/G2 wirelessly. Follow this procedure to verify that your phone is connected to the wireless network. If you have questions, consult your phone administrator. -
Page 81: Using The Cisco Spa 525G2 With Your Bluetooth-Enabled Mobile Phone
Ethernet cable is connected to the phone. Using the Cisco SPA 525G2 With Your Bluetooth-Enabled Mobile Phone The Cisco SPA525G2 supports the use of your Cisco IP phone in conjunction with a Bluetooth-enabled mobile phone. You can do the following tasks: •... -
Page 82: Enabling Bluetooth
Import your mobile phone address book to your Cisco SPA 525G2 personal address book. • Use your Cisco SPA 525G2 as a “handsfree device” for your mobile phone. Not all mobile phones support this function. For information about compatible NOTE Bluetooth-enabled mobile phones, visit the Cisco Small Business support community (http://www.cisco.com/go/smallbizsupport), and view the latest Cisco... -
Page 83: Initiating Pairing From The Cisco Spa 525G2
“Connecting Wired and Wireless Headsets (Optional)” section on page 15.) Your Cisco SPA 525G2 will connect to only one device at a time (either NOTE the Bluetooth headset or the Bluetooth-enabled mobile phone.) If multiple Bluetooth devices are in range of the Cisco SPA 525G2, the order of devices in the Bluetooth Configuration >... -
Page 84: Initiating Pairing From Your Bluetooth-Enabled Mobile Phone
The following example uses an Apple iPhone. Before starting, it’s helpful to find the MAC address of your Cisco SPA 525G2 IP phone. From your IP phone, go to the Setup menu and select Status. Select Product Information. -
Page 85: Importing Your Mobile Phone Address Book Into The Cisco Spa 525G2
Using Advanced Phone Features Using the Cisco SPA 525G2 With Your Bluetooth-Enabled Mobile Phone • Blue icon: Bluetooth is enabled and the Cisco SPA 525G2 is connected to a headset. • Green icon: Bluetooth is enabled and the Cisco SPA 525G2 is connected to a mobile phone. -
Page 86: Making A Mobile Phone Call Using Your Cisco Spa 525G2
Making a Mobile Phone Call Using Your Cisco SPA 525G2 When you make a mobile phone call using your Cisco SPA 525G2, your Cisco SPA 525G2 acts as a handsfree device for your phone. The call is made through your... -
Page 87: Receiving Mobile Phone Calls Using The Cisco Spa 525G2
Using the Cisco SPA 525G2 With Your Bluetooth-Enabled Mobile Phone Receiving Mobile Phone Calls Using the Cisco SPA 525G2 If your mobile phone is paired with the Cisco SPA 525G2, an incoming call to your mobile phone is also shown on the Cisco SPA 525G2. -
Page 88: Charging Your Mobile Phone Using Your Cisco Spa 525G2
Network (optional): May show the phone network for your mobile phone. Charging Your Mobile Phone Using Your Cisco SPA 525G2 You can use the USB port on the Cisco SPA 525G2 model to charge your Bluetooth-enabled mobile phone if your phone charger requires a mini-USB port. -
Page 89: Changing The System Time Settings
Internet or if the time server is not reachable, you can set the system clock from any Cisco IP phone in the system. Be aware that this manual setting will be lost if the Unified Communications system loses power. - Page 90 6. After entering the year, month, day, hour, and minute, press Save 7. Press 8. Press to close the window. The time setting is propagated to the UC320W and the other phones. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 91: Appendix A: Using An Analog Phone With The Cisco Uc320W
Press the hook flash button to place a call on hold. A call long tone sounds. You can dial another number, or set aside the receiver. To resume the call, press the flash hook button again. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... -
Page 92: Using Star Codes For Special Features On Analog Phones
Disable call waiting. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W... - Page 93 This feature is active until you disable it by blocking. Anonymous entering *87. calls will be ignored. Enable Do Not Disturb. This feature is active until you disable it. Disable Do Not Disturb. Disable Call Back. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
- Page 94 A short tone plays. Enter the number where you want to transfer the call. Note: This feature works only if the analog phone has a hook flash button. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W...
-
Page 95: Appendix B: Where To Go From Here
Where to Go From Here Cisco provides a wide range of resources to help you obtain the full benefits of your IP phone. Support Cisco Small Business www.cisco.com/go/smallbizsupport Support Community Product Documentation Cisco SPA500 Series IP www.cisco.com/go/spa500phones Phones SPA300 Series Phones www.cisco.com/go/300phones...