Index Page General safety instructions 1 Description 2 "i-Temp" function 3 "AntiShine" function 4 How to use the steam station 5 Preparations before ironing 6 Setting the temperature 7 Ironing with steam 8 “PulseSteam” function* 9 Ironing without steam 10 Vertical steam 11 Energy saving “eco”...
Thank you for buying the Sensixx Important B45L steam station, the new steam- Carefully read through the operating ironing system from Bosch. instructions for the appliance and keep Please visit www.bosch-home.co.uk them safe for future reference. for more product information or to...
Page 5
instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. • Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down.
After that time, the appliance "i-Temp" shifts automatically to the “i-Temp” function setting. The icon will flash until the temperature and steam settings are This steam station has a unique reached. “i-Temp” function. When switching on the appliance it automatically sets an appropriate combination of temperature and steam, which is suitable for all fabrics that can be ironed.
4. Steam settings: 6. Beep activation/deactivation You can activate or deactivate a beep Steam level selection touch which may be heard when touching the icon is used to change the icons on the display (8). amount of steam coming out of the soleplate.
Page 9
Important: 5. Unwind the mains cable (5) fully, and plug it into an earthed socket. • Normal tap water can be used. 6. Set the main power button (9) to the To prolong the optimum steam on position (illuminated in red). function you can mix tap water with distilled water 1:1.
• If you are not sure what the garment Setting the is made of then begin ironing at a temperature low temperature and decide on the correct temperature by ironing a By default, the steam station small section not usually seen when automatically chooses the “i-Temp”...
Attention: Ironing without • When ironing on a lower temperature steam setting , only press the steam release button (13) for a few seconds at a time. This enables the iron to be used for If you find that water is dripping out of dry ironing.
Energy saving Fabric protection “eco” button soleplate cover If the “Energy saving” button (7) is (model dependent) switched on, you can save up to 25% The fabric-protection soleplate cover of the energy and 40% of the water (17*) is used for steam ironing delicate garments at maximum temperature consumption (*), and still achieve without damaging them.
Page 13
Do not use descaling agents for rinsing 1. Check carefully that the appliance is out the boiler, as they could damage it. cold and unplugged for more than 2 hours, and that the water tank (1) is If the “ ”...
Rinsing the iron steam chamber Caution! Risk of burns! This procedure helps to remove scale particles from the steam chamber. This cleaning procedure may be performed occasionally (approximately once a year), when after a long period of use with very hard water, scale particles start to come out of the soleplate.
Cleaning & Storing the Maintenance appliance 1. Always allow the appliance to cool Attention! Risk of burns! down before storing it. Always unplug the appliance from 2. Set the main power button to the “0” the mains supply before carrying position (the red light will go off) and out any cleaning or maintenance disconnect the mains cable.
Advice on disposal Guarantee conditions Our goods come in optimised The terms of the guarantee for this packaging. This basically consists of appliance are in accordance with that non-contaminating materials which stated by our representative for the should be handed over to the local country in which it is sold.
Page 17
Problem Possible causes Solution The steam • There is a connection • Check the mains cable (5), generator does problem. the plug and the socket. not come on. • The main power button is • Set the main power button (9) not switched on.
Page 18
(2). If the above does not solve the problem, get in touch with an authorised technical service. You can download this manual from the local homepages of Bosch. * Model dependent BOSC H...
Page 20
Great Britain Bosch Customer Service Grand Union House Old Wolverton Road Milton Keynes MK12 5PT UK +44 (0)844 892 8979 IRL +353 (0)1450 2655 www.bosch-home.co.uk 001 B45L-LCD i-Temp/AntiShine GB /11/12...