Related Manuals for Toshiba PSLB9U-00R011
Summary of Contents for Toshiba PSLB9U-00R011
- Page 1 TOSHIBA Satellite L300/ Satellite Pro L300/ Satellite L300D/ Satellite Pro L300D series User’s Manual...
- Page 2 © 2008 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior writ- ten permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
-
Page 3: Safety Instructions
DVD MovieFactory is trademarks of the Ulead Systems. Inc. Labelflash™ is a trademark of YAMAHA CORPORATION. Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No's. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U.S. and world-wide patents issued and pending. "DTS" and "DTS Digital Surround"... -
Page 4: Fcc Information
■ Use only the AC adaptor and batteries that are approved for use with this computer. Use of another type of battery or AC adaptor may risk fire or explosion. ■ Before you connect the computer to a power source, ensure that the voltage rating of the AC adaptor matches that of the available power source. -
Page 5: Fcc Conditions
Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s external monitor port, USB port, and... - Page 6 Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causng Equipment Regulations.
-
Page 7: Region Selection
Switzerland ATAAB AN002 All other countries/regions ATAAB AN003,004 Specific switch settings or software setup is required for each network, please refer to the relevant sections of the user guide for more details. The hookflash (timed break register recall) function is subject to separate national type approvals. -
Page 8: Type Of Service
FCC. In the event repairs are ever needed on your modem, they should be performed by TOSHIBA Corporation or an authorized representative of TOSHIBA Corporation. -
Page 9: Fax Branding
Disconnection If you should ever decide to permanently disconnect your modem from its present line, please call the telephone company and let them know of this change. Fax branding The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of... - Page 10 The user manual of analog equipment must contain the equipment’s Ringer Equivalence Number (REN) and an explanation notice similar to the following: The Ringer Equivalence Number (REN) of the modem, which can vary. For the REN of your modem, refer to your modem’s label The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.
- Page 11 Telecoms Act 1991 prescribes a penalty of $12,000 for the connection of non-permitted equipment. Notes for use of this device in New Zealand ■ The grant of a Telepermit for a device in no way indicates Telecom acceptance of responsibility for the correct operation of that device under all operating conditions.
-
Page 12: General Conditions
(a) a person calling your modem will hear a short burst of ringing before the modem answers. This confirms that the call has been successfully switched through the network. (b) caller identification information (which occurs between the first and second ring cadences) is not destroyed. ■... - Page 13 The Telepermit label may also be shown on the packaging of the product and in the sales literature, as required in PTC 100. The charge for a Telepermit assessment is $337.50. An additional charge of $337.50 is payable where an assessment is based on reports against non-Telecom New Zealand Specifications.
-
Page 14: Energy Star Program
ENERGY STAR logo on the computer and the following information applies. TOSHIBA is a partner in the Environmental Protection Agency’s (EPA) ENERGY STAR ® Program and has designed this computer to meet the ®... -
Page 15: Optical Disc Drive Safety Instructions
Optical disc drive standards TOSHIBA Satellite L300/Satellite Pro L300/Satellite L300D/Satellite Pro L300D series computer is shipped with one of the following drives preinstalled: CD-RW/DVD-ROM, DVD Super Multi (+-R DL), DVD Super Multi (+-R DL) /w Label Flash, HD DVD-ROM, or HD DVD-RW drive. - Page 16 PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT THE DATE OF MANUFACTURE. MANUFACTURED Toshiba Samsung Strage Technology Korea corporation 416, Maetan-3Dong, Yeongtong-Gu Suwon City, Gyeonggi-Do, 443-742, Korea TEAC DW-224E Location of the required label...
- Page 17 DVD Super Multi (+-R DL) drive Panasonic UJ-870B/UJ-870F Location of the required label COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. MANUFACTURED Panasonic Communications Co., Ltd. 1-62, 4-Chome Minoshima Hakata-ku Fukuoka, Japan HLDS GSA-T40N/GSA-T40F Location of the required label COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.
- Page 18 PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR CHAPTER 1, SUBCHAPTER J, APPLICABLE AT THE DATE OF MANUFACTURE. MANUFACTURED Toshiba Samsung Storage Technology Korea Corporation 416, Maetan-3Dong, Yeongtong-Gu, Suwon City, Gyeonggi-Do, 443-742, Korea User’s Manual...
- Page 19 HD DVD-ROM drive Toshiba SD-L802B Location of the required label PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR CHAPTER1, SUBCHAPTER J, APPLICABLE AT THE DATE OF MANUFACTURE. MANUFACTURED TOSHIBA CORPORATION 1-1-1, SHIBAURA, MINATO-KU, TOKYO 105-8001, JAPAN...
- Page 20 International precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.”...
-
Page 21: Important Notice
Dispose of used batteries according to the manufacturer’s instructions. Use only the battery pack that came with the computer or an optional battery pack. Use of wrong battery could damage your computer. TOSHIBA assumes no liability for any damage in such case. User’s Manual... -
Page 22: Table Of Contents
Special features ......... 1-11 TOSHIBA Value Added Package ......1-13 Utilities and applications . - Page 23 Notes on playing HD DVD video discs ..... . . 4-7 Using TOSHIBA HD DVD PLAYER ......4-10 Starting TOSHIBA HD DVD PLAYER .
- Page 24 TOSHIBA Disc Creator ........4-29...
- Page 25 Typewriter keys......... . . 5-1 Function keys: F1 …...
- Page 26 HW Setup window........7-1 Optional Devices Chapter 8 Cards/Memory .
- Page 27 TOSHIBA support ........
-
Page 28: Preface
Preface Congratulations on your purchase of the TOSHIBA Satellite L300/Satellite Pro L300/Satellite L300D/Satellite Pro L300D series computer. This pow- erful, lightweight notebook computer is designed to provide years of relia- ble, high-performance computing. This manual tells how to set up and begin using your Satellite L300/Satellite Pro L300/Satellite L300D/Satellite Pro L300D series computer. - Page 29 Preface Chapter 5, Keyboard, describes special keyboard functions including the keypad overlay and hot keys. Chapter 6, Power and Power-up Modes, gives details on the computer’s power resources and battery save modes. Chapter 7, HW Setup and Passwords, explains how to configure the computer using the HW Setup program.
- Page 30 Preface When procedures require an action such as clicking an icon or entering text, the icon’s name or the text you are to type in is represented in the typeface you see to the left. Display Names of windows or icons or text generated by the computer that appear on its display screen are presented in the typeface you see to the left.
-
Page 31: General Precautions
General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual. -
Page 32: Instruction Manual For Safety And Comfort
General Precautions Heat injury ■ Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury. -
Page 33: Equipment Checklist
Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packaging materials for future use. -
Page 34: Software
TOSHIBA CD/DVD Drive Acoustic Silencer ■ TOSHIBA ConfigFree ■ TOSHIBA Disc Creator ■ TOSHIBA DVD PLAYER (Is preinstalled with DVD Super Multi drive model) ■ TOSHIBA HD DVD PLAYER (Is preinstalled with HD DVD-ROM drive, or HD DVD-RW drive model) ■... -
Page 35: Memory
Introduction Memory Slots PC2-5300 512 MB, 1024 MB or 2048 MB memory modules can be installed in the two memory slots. Maximum system memory size and speed depend on the model you purchased. *PC2-5300 memory module works as PC2-4200 speed on GL960 Express Chipset. Video RAM Depending on the model you purchased. - Page 36 Introduction Some models are equipped with a full-size, CD- CD-RW/DVD-ROM RW/DVD-ROM drive module that allows you to drive run CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed. It writes CD-R at up to 24 speed and CD-RW at up to 24 speed.
- Page 37 Introduction Some models are equipped with a full-size DVD DVD Super Multi (+-R Super Multi (+- R DL) drive module that lets you DL) drive record data to rewritable CD/DVDs as well as run CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed.
- Page 38 Introduction Some models are equipped with a full-size HD HD DVD-ROM drive DVD-ROM drive module that lets you run CD/DVD/HD DVDs without using an adaptor. The drive reads DVD-ROMs at a maximum 8x speed, CD-ROMs at a maximum 24x speed, and HD DVDs at a maximum 1x speed.
- Page 39 Introduction Some models are equipped with a full-size HD HD DVD-RW drive DVD-RW drive module that lets you run CD/DVD/HD DVDs without using an adaptor. The drive reads DVD-ROMs at a maximum 8x speed, CD-ROMs at a maximum 24x speed, and HD DVD-ROMs at a maximum 2.4x speed.
-
Page 40: Keyboard
Introduction Keyboard ® Built-in 86 keys or 87 keys, compatible with IBM enhanced keyboard, embedded numeric overlay, dedicated cursor control, keys. See Chapter 5, Keyboard, for details. Pointing device A touchpad and control buttons in the palm rest Built-in enable control of the on-screen pointer. Power The computer is powered by one rechargeable Battery pack... -
Page 41: Ports
Introduction Ports Headphone Enables connection of a stereo headphone. Microphone Enables connection of a microphone. External monitor 15-pin, analog VGA port. Universal Serial Bus Three Universal Serial Bus (USB) enable a chain (USB 2.0) connection of USB-equipped devices to your computer through the ports. -
Page 42: Communications
Introduction Communications The computer is equipped with a LAN that supports Ethernet LAN (10 Mbit/s, 10BASE-T) or Fast Ethernet LAN (100 Mbit/s, 100BASE-TX). It is preinstalled as a standard device in some markets. A Wireless LAN mini card is equipped with other Wireless LAN LAN systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency Division... -
Page 43: Special Features
Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use.To access the Power Options, click Start → Control Panel → System and Maintenance →... - Page 44 Introduction Intelligent power A microprocessor in the computer’s intelligent supply power supply detects the battery’s charge and calculates the remaining battery capacity. It also protects electronic components from abnormal conditions, such as voltage overload from an AC adaptor. This can be specified in the Power Options.
-
Page 45: Toshiba Value Added Package
■ TOSHIBA utility launcher function ■ When you start or resume your computer, the TOSHIBA Flash Cards may take a moment to become available and may display several times before completely activating. The hot key functions will be available once the TOSHIBA Flash Cards are completely active. -
Page 46: Utilities And Applications
TOSHIBA Assist TOSHIBA Assist is a graphical user interface that provides easy access to help and services. HW Setup utility To start the utility, click the Windows Start button, point to All Programs, click TOSHIBA, click Utilities, and select HWSetup icon. - Page 47 Introduction TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication device and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks. You can boot ConfigFree from the menu bar as follows.
-
Page 48: Options
1BRS/PA3533U-1BAS), 6 cell Type (PA3534U- 1BRS/ PA3534U-1BAS) and 9 cell Type (PA3535U-1BRS/ PA3535U-1BAS) can be purchased from your TOSHIBA dealer. The battery pack is identical to the one that came with your computer. Use it as a spare or replacement. -
Page 49: Chapter 2 The Grand Tour
Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed Figure 2-1 shows the computer’s front with its display panel in the closed position. - Page 50 The Grand Tour Front edge logo indicates the computer series Front edge logo you bought. (Depends on the model you purchased.) Slide this switch toward the right of the computer Wireless to turn on Wireless communication. Slide it communication toward the left of the computer to turn off the switch functions.
-
Page 51: Left Side
The Grand Tour Left side Figure 2-2 shows the computer’s left side. JACK XPRESS AN VENT PC C ARD SLOT HDMI OUT PORT XTERNAL MONITOR PORT PORTS EPENDING ON THE MODEL YOU PURCHASED Figure 2-2 The left side of the computer This 15-pin port lets you connect an external External monitor monitor. - Page 52 The Grand Tour Keep foreign objects out of the USB connectors. A pin or similar object can damage the computer’s circuitry. Operation of all functions of all USB devices has not been confirmed. some functions might not execute properly. Express Card slot The computer provides an Express Card slot on its left side, which allows you to install an additional Express card.
-
Page 53: Right Side
The Grand Tour Right side Figure 2-3 shows the computer’s right side. ECURITY LOCK SLOT DC IN 19V PTICAL DISC DRIVE PORTS Figure 2-3 The right side of the computer Universal serial The universal serial bus (USB) port comply with bus (USB 2.0) USB Serial 2.0 standards, which enables data ports... -
Page 54: Back Side
The Grand Tour Back side Figure 2-4 shows the computer’s back side. ODEM JACK EPENDING ON THE MODEL YOU PURCHASED Figure 2-4 The computer’s back side Modem jack In areas where an internal modem is installed as standard equipment, there is a modem jack that lets you use a modular cable to connect the modem directly to a telephone line. - Page 55 Chapter 6, Power and Power-up Modes, describes how to access the battery pack. Additional battery packs can be purchased from your TOSHIBA dealer to extend the computer’s battery operating time. Battery release Slide this latch to release the battery pack.
-
Page 56: Front With The Display Open
The Grand Tour Front with the display open Figure 2-6 shows the front of the computer with the display open. To open the display, lift the display up and position the display at a comfortable viewing angle. EB CAMERA EB CAMERA LED UILT IN MICROPHONE ISPLAY SCREEN... -
Page 57: System Indicators
The Grand Tour Touch pad Moves the pointer and selects or activates items on the screen. Can be set to perform other mouse functions, such as scrolling, selecting, and double-clicking. Touch pad Function like the left and right buttons on an control buttons external mouse. -
Page 58: Keyboard Indicators
The Grand Tour The DC IN indicator glows green when DC power DC IN is supplied from the AC power adaptor. If the adaptor’s output voltage is abnormal or if the power supply malfunctions, this indicator shows no light. The Power indicator glows green when the Power computer is on. -
Page 59: Optical Disc Drive
The Grand Tour When the F10 key indicator glows the keypad overlay lets you control the cursor. When the F11 key indicator glows the keypad overlay lets you enter numbers. RROW MODE UMERIC MODE Figure 2-9 Keypad overlay indicators Arrow mode When the Arrow mode indicator lights green, you can use the keypad overlay (dark gray labeled keys) as cursor keys. - Page 60 The Grand Tour ■ Unfinalized DVDs created on home DVD recorders may not be playable on the computer. ■ When inserting an unfinalized DVD-R DL disc into the computer, Windows Vista™ may automatically finalize the disc and prevent further writing. Notes on use ■...
-
Page 61: Region Codes For Dvd Drives And Media
This section describes the types of writable CD/DVD/HD DVD discs. Check the specifications for your drive to for the type of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Refer to Chapter 4, Operating Basics ■... -
Page 62: Cd-Rw/Dvd-Rom Drive
The Grand Tour CD-RW/DVD-ROM drive The full-size CD-RW/DVD-ROM drive module allows you to record data to rewritable CDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the outer edge. - Page 63 The Grand Tour The read speed is slower at the center of a disc and faster at the outer edge. DVD read 8 speed (maximum) DVD-R write 4 speed (maximum) DVD-RW write 4 speed (maximum) DVD+R write 4 speed (maximum) DVD+RW write 4 speed (maximum) DVD+R DL write...
-
Page 64: Hd Dvd-Rw Drive
The Grand Tour HD DVD-RW drive The full-size HD DVD-RW drive module lets you record data to rewritable CDs as well as run either 12 cm (4.72") HD DVD,12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the outer edge. -
Page 65: Ac Adaptor
Figure 2-10 The AC adaptor (2-pin plug) Figure 2-11 The AC adaptor (3-pin plug) ■ Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC. -
Page 66: Chapter 3 Getting Started
Chapter 3 Getting Started This chapter provides basic information to start using your computer. It covers the following topics: Be sure also to read Instruction Manual for Safety and Comfort. This guide, which is included with the computer, explains product liability. ■... -
Page 67: Connecting The Ac Adaptor
Chapter 6, Power and Power-up Modes. Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC. -
Page 68: Opening The Display
Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. To open the display, slide the latch to the right side and lift the panel up to the best viewing angle. When you open the display, be sure to hold the base firmly and lift up the monitor slowly. -
Page 69: Starting Up For The First Time
Getting Started Power button Figure 3-4 Turning on the power Starting up for the first time When you first turn on the power, the computer’s initial screen is the ® Microsoft Windows Vista™ Startup Screen Logo. Follow the on-screen directions. Turning off the power The power can be turned off in one of three modes:shut down (Boot) , hibernation mode or sleep mode. -
Page 70: Hibernation Mode
Getting Started Hibernation mode The hibernation feature saves the contents of memory to the hard disk when the computer is turned off. The next time the computer is turned on, the previous state is restored. The hibernation feature does not save the status of peripheral devices. -
Page 71: Sleep Mode
Getting Started 4. Enable the desired hibernation settings for When I press the power button and When I close the lid. 5. Click the Save changes button. You can also enable hibernation mode by pressing FN + F4 - please refer to Chapter 5, Keyboard, for further details. -
Page 72: Restarting The Computer
Getting Started Benefits of sleep mode The sleep feature provides the following benefits: ■ Restores the previous working environment more rapidly than does hibernation feature. ■ Saves power by shutting down the system when the computer receives no input or hardware access for the duration set by the system sleep feature. -
Page 73: System Recovery Options
Getting Started 2. Press CTRL, ALT and DEL simultaneously (once) to display the menu window, then click the arrow button in the lower right corner of the screen, then select Restart. 3. Press the power button and hold it down for five seconds. Once the computer has turned itself off, wait between ten and fifteen seconds before turning the power on again by pressing the power button. -
Page 74: Restoring The Preinstalled Software From The Recovery Hdd
Getting Started 5. Double click the Recovery Disc Creator icon on the Windows Vista™ desktop, or select the application from Start menu. 6. After Recovery Disc Creator starts, select the type of media and the title you wish to copy to the media then click the Burn. If your optical drive can only write to CDs, select "CD"... - Page 75 1. Load the Recovery Media in the optional optical disc drive and turn off the computer's power. 2. Hold down the F12 key and turn on the power. When TOSHIBA Lead- ing Innovation>>> appears, release the F12 key. 3. Use the up or down cursor key to select CD/DVD in the display menu.
-
Page 76: Chapter 4 Operating Basics
Chapter 4 Operating Basics This chapter gives information on basic operations including using the touchpad, optical disc drives, Audio/Video controls, the web camera, the microphone, the internal modem, wireless communication and LAN. It also provides tips on caring for your computer, and CD/DVD/HD DVDs. Using the touchpad To use the touchpad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go. -
Page 77: Using Optical Disc Drives
DVD Super Multi (+-R DL) drive model) ■ Use the TOSHIBA HD DVD PLAYER application to view DVD-Video discs or HD DVD-Video discs.(HD DVD-ROM model, or HD DVD-R drive model or HD DVD-RW drive model) If you have a CD-RW/DVD-ROM drive, refer to the... -
Page 78: Loading Discs
Operating Basics Loading discs To load CD/DVD/HD DVDs, follow the steps below and refer to figures. 1. a. When the power is on, press the eject button to open the drawer slightly. JECT BUTTON Figure 4-2 Pressing the eject button b. - Page 79 Operating Basics 2. Grasp the drawer gently and pull until it is fully opened. Figure 4-4 Pulling the drawer open 3. Lay the CD/DVD/HD DVD, label side up, in the drawer. Figure 4-5 Inserting a CD/DVD/HD DVD When the drawer is fully opened, the edge of the computer will extend slightly over the CD/DVD/HD DVD tray.
-
Page 80: Removing Discs
Operating Basics 4. Press gently at the center of the CD/DVD/HD DVD until you feel it click into place. The CD/DVD/HD DVD should lie below the top of the spindle, flush with the spindle base. 5. Push the center of the drawer to close it. Press gently until it locks into place. -
Page 81: Using Toshiba Hd Dvd Player To Enjoy Hd Dvds
HD DVD playback restrictions HD DVD-ROM drive, HD DVD-R drive and HD DVD-RW drive model allow users to enjoy the strong visuals of HD DVD Video. "TOSHIBA HD DVD PLAYER" software is provided for playback of HD DVD Video. Notes on use HD DVD playback ■... -
Page 82: Notes On Playing Hd Dvd Video Discs
Please view HD DVD Video during times when there is no recording pre-scheduled. ■ The resume function cannot be used with some discs on the "TOSHIBA HD DVD PLAYER". ■ Make sure to connect the computer's AC adaptor when using the “TOSHIBA HD DVD PLAYER”. -
Page 83: Toshiba Hd Dvd Player
Display devices & audio ■ "TOSHIBA HD DVD PLAYER" will only run when "Colors" is set to "Highest (32 bit)". The "Colors" setting can be adjusted on the "Monitor" tab in the "Display Settings". To open the Display Settings, click [Start] - [Control Panel] - [Appearance and Personalization] - [Personalization] - [Display Settings]. - Page 84 Carry out the installation/uninstallation of the "TOSHIBA HD DVD PLAYER" under a user account with administrator rights. ■ Do not change Windows Users while "TOSHIBA HD DVD PLAYER" is running. ■ Some HD DVD Video disc titles may return to the title before the playback time (playback position) displayed in the control window reaches the end time.
-
Page 85: Using Toshiba Hd Dvd Player
HD DVD drive, the following application selection screen may appear. If this occurs, select Play HD DVD movie or Run the HD DVD Launcher, then click OK to launch the TOSHIBA HD DVD PLAYER. Figure 4-8 Application selection screen 2. - Page 86 INIMIZE ISPLAY AREA TOSHIBA HD DVD PLAYER c ONTROL WINDOW Figure 4-9 TOSHIBA HD DVD PLAYER windows Displays video. Double click on the Display Area Display Area to toggle full screen display mode on and off. Click the Display Area to display the Control window when it isn't displayed.
-
Page 87: Open Toshiba Hd Dvd Player Help
"TOSHIBA HD DVD PLAYER control window" section for more information. Open TOSHIBA HD DVD PLAYER HELP TOSHIBA HD DVD PLAYER features and instructions are also explained in detail in "TOSHIBA HD DVD PLAYER Help". Click the "Help" button( ) in the Display Area to open "TOSHIBA HD DVD PLAYER Help". -
Page 88: Volume Control
TOUCH REPLAY CHAPTER Next chapter AUSE LOW MOTION FORWARD REWIND Figure 4-11 TOSHIBA HD DVD PLAYER control window (2) Opens the disc tray. Eject Jumps to the previous chapter. Previous chapter Jumps to the next chapter. Next chapter Stops a HD DVD currently being run. - Page 89 EPEAT ETURN ITLE HAPTER RIVE SPECIFICATION SEARCH Figure 4-12 TOSHIBA HD DVD PLAYER control window (3) Switches between available subtitles. Subtitle Switches between audio tracks for titles which Sound have more than 1 audio track. Switches between angles for multi-angle Angle compatible titles.
-
Page 90: Using The Computer In Place Of A Hd Dvd Player
Operating Basics Using the computer in place of a HD DVD Player Videos played using "TOSHIBA HD DVD PLAYER" included with the computer can be displayed on a television equipped with a HDMI input port. HD DVD-Video can only be displayed on the computer's display panel or on a television connected to the HDMI out port. -
Page 91: Switching Between Computer And Television Display
The following is a HD DVD-Video display compatibility list. O:The display of TOSHIBA HD DVD PLAYER is possible. X:The display of TOSHIBA HD DVD PLAYER is impossible. When using TOSHIBA HD DVD PLAYER... -
Page 92: Writing Cds On Cd-Rw/Dvd-Rom Drive
CD-RW: MITSUBISHI KAGAKU MEDIA CO., LTD Ricoh Co., Ltd. ■ TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used. -
Page 93: When Writing Or Rewriting
Write from the computer’s HDD to the CD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator has not been confirmed. Therefore, operation with other software cannot be guaranteed. -
Page 94: Disclaimer (Cd-Rw/Dvd-Rom Drive)
Some models are equipped with a full-size DVD Super Multi (+-R DL ) drive/HD DVD-ROM drive, which can be used to write data to either CD-R/- RW or DVD-R/-RW/+R/+RW/-RAM/+R DL/-R DL discs. The following applications for writing are supplied: TOSHIBA Disc Creator. Ulead DVD Movie Factory ®... -
Page 95: Before Writing Or Rewriting
Based on TOSHIBA’s limited compatibility testing, we suggest the following manufacturers of CD-R/-RW and DVD-R/+R/-RW/+RW/- RAM/+R DL/-R DL disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates. - Page 96 Operating Basics DVD-R for Labelflash™: FUJIFILM Corporation. DVD+R for Labelflash™: FUJIFILM Corporation. This DVD Super Multi (+-R DL) drive cannot use discs that allow writing faster than 8x speed (DVD-R, DVD+R and DVD+RW media), 6x speed (DVD-RW media), 5x speed (DVD-RAM media) and 4x speed (DVD-R DL and DVD+R DL media).
-
Page 97: When Writing Or Rewriting
Write from the computer’s HDD to the CD/DVD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator is not recommended. When writing or rewriting Please observe/consider the following when you write or rewrite to a CD- R/-RW, DVD-R/-R DL/-RW/-RAM or DVD+R/+R DL/+RW disc. -
Page 98: Disclaimer (Dvd Super Multi (+-R Dl) Drive)/Hd Dvd-Rom Drive
Some models are equipped with a full-size HD DVD-RW drive, which can be used to write data to either CD-R or CD-RW, DVD-R, DVD-R DL, DVD- RW, DVD+R, DVD+R DL, DVD-RAM, HD DVD-R, HD DVD-R DL, HD DVD-RW discs. This computer is provided with TOSHIBA Disc Creator and Ulead ®... -
Page 99: Important Message (Hd Dvd-Rw Drive)
CD-R/RW media cannot be accessed using the Create CD/DVD option in Media Center. ■ To write data to CD-RI-RW media, use the TOSHIBA Disc Creator feature that is installed on your computer. When writing information to media using an optical drive, you should always ensure that you connect the AC adaptor to a live power socket. -
Page 100: Before Writing Or Rewriting
Operating Basics Before writing or rewriting ■ Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R, CD-RW, DVD-R, DVD-R DL, DVD- RW, DVD+R, DVD+R DL, DVD+RW, DVD-RAM, HD DVD-R, HD DVD- R DL or HD DVD-RW media, however, it must be noted that disc quality can affect write or rewrite success rates. - Page 101 Operating Basics DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD. RICOH CO., LTD. DVD-RAM: HITACHI MAXELL, LTD. MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD. HD DVD-R: HITACHI MAXELL, LTD. MITSUBISHI KAGAKU MEDIA CO., LTD. HD DVD-R DL: MITSUBISHI KAGAKU MEDIA CO., LTD. HD DVD-RW: RITEK Corporation.
- Page 102 CD/DVD/HD DVD - do not try to write from shared devices such as a server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator has not been confirmed, therefore operation with other software applications cannot be guaranteed.
-
Page 103: When Writing Or Rewriting
Operating Basics When writing or rewriting Please observe the following points while you write or rewrite data to CD-R, CD-RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW, DVD-RAM, HD DVD-R, HD DVD-R DL or HD DVD-RW media: ■ Always copy data from the hard disk drive to the optical disc - do not use the cut-and-paste function as the original data will be lost if there is a write error. -
Page 104: Toshiba Disc Creator
CD Player' function to record music to DVD-R, DVD-R DL,DVD-RW, DVD+R, DVD+R DL, DVD+RW, HD DVD-R or HD DVD-RW media. ■ Do not use the 'Disc Backup' function of TOSHIBA Disc Creator in order to copy DVD Video, DVD-ROM, HD DVD-R or HD DVD-RW material that has copyright protection. -
Page 105: Data Verification
Simplified steps for making a Labelflash DVD: 1. Insert a Labelflash disc in DVD drive. Set PRINTING SIDE for underside. 2. Click [Start] - [All Programs] - [DVD MovieFactory for TOSHIBA] - [Ulead DVD MovieFactory for TOSHIBA Laucher] to lanuch DVD MovieFactory. -
Page 106: How To Learn More About Ulead Dvd Moviefactory
5. Choose the capture source is DV. 6. Press Capture button. Simplified steps for making a DVD-Video from adding video source: 1. Click [Start] - [All Programs] - [DVD MovieFactory for TOSHIBA] - [ Ulead DVD MovieFactory for TOSHIBA Launcher] to launch DVD MovieFactory. -
Page 107: Important Information For Use
Operating Basics Important information for use Note the following limitations when you write Video DVD: 1. Editing digital video ■ Log in with Administrator rights to use DVD MovieFactory. ■ Make sure that your computer is running on AC power when using DVD MovieFactory. -
Page 108: Media Care
Operating Basics ■ Please verify your disc after recording important data. ■ DVD-R/+R/+RW disc cannot be written in VR format. ■ Not support to output VCD and SVCD format. 3. About Straight to Disc ■ Not support to record on DVD-R/+R disc ■... -
Page 109: Using The Web Camera
Operating Basics Using the web camera Built-in web camera is provided with some models. This section describes the bundled webcam utility, which can capture still and video images. The web camera will auto-run when Windows starts. Please unstick the protective plastic-film before using the Web Camera. EB CAMERA LENS Active LED UILT... -
Page 110: Using The Microphone
Operating Basics Audio Recording Click to start recording, Click again to stop and listen to a preview of the audio. Function Accesses additional functions: About, Player, Effects, Properties, Settings and Help. About Displays software manufacturer details. Player Plays video files. Effects Chooses images to be displayed on the capture screen. -
Page 111: Region Selection
To select a region, follow the steps below. 1. In Windows Vista™, click start, point to All Programs, point to TOSHIBA, point to Networking and click Modem Region Select. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available. -
Page 112: Properties Menu
Operating Basics Properties menu Click the icon with the secondary mouse button to display the following menu. Figure 4-17 The menu list (Windows Vista™) Setting You can enable or disable the following settings: AutoRun Mode The Region Select utility starts automatically when you start up the operating system. -
Page 113: Connecting
Operating Basics Connecting To connect the internal modem cable, follow the steps below. 1. Plug one end of the modular cable into the modem jack. 2. Plug the other end of the modular cable into a telephone jack. ODEM JACK ELEPHONE JACK Figure 4-18 Connecting the internal modem Do not pull on the cable or move the computer while the cable is... -
Page 114: Wireless Communication Switch
TOSHIBA strongly recommends the customer to enable the encryption function. ■ TOSHIBA is not liable for the eavesdropping of data due to the use of Wireless LAN and the damage thereof. Wireless communication switch You can enable or disable RF transmission(Wireless LAN) functions on and off, with this switch (Provided with some models). -
Page 115: Lan
Operating Basics Wireless communication Indicator The wireless communication indicator indicates the status of the wireless communication functions. Indicator status Indication Wireless communication switch is set to off. Indicator off Automatic power down because of overheating. Power malfunction Wireless communication switch is on. Indicator glows Wireless LAN is turned on by an application. -
Page 116: Disconnecting Lan Cable
Operating Basics If you are using Ethernet LAN (10 Mbit/s, 10BASE-T), connect with a category 3 cable, CAT3, or higher. To connect the LAN cable, follow the steps below. 1. Turn off the power to the computer and to all external devices con- nected to the computer. -
Page 117: Cleaning The Computer
Operating Basics Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer. ■ Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely before you turn it on again. - Page 118 Operating Basics If the CPU temperature reaches an unacceptably high level with either setting, the system automatically shuts down to prevent damage. Data in memory will be lost. User’s Manual 4-43...
-
Page 119: Typewriter Keys
Chapter 5 The Keyboard The computer’s keyboard layout is compatible with a 104/105-key enhanced keyboard. Pressing FN key an other keys can execute all enhanced keyboard function. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. Keyboards for numerous languages are available. -
Page 120: Function Keys: F1
Soft keys: FN key combinations The FN (function) is unique to Toshiba computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features. -
Page 121: Hot Keys
The Keyboard Press FN + F12 (Scroll Lock) to lock the cursor on a specific line. The power on default is off. Press FN + ENTER to simulate ENTER on the enhanced keyboard’s numeric keypad. Press FN + CTRL to simulate the enhanced keyboard’s right CTRL key. Press FN + ALT to simulate the enhanced keyboard’s right ALT key. - Page 122 Touchpad: Pressing FN + F9 enables or disables the touchpad function. Zoom: Pressing FN + SPACE changes the display resolution. TOSHIBA zooming utility (reduce): Pressing FN + 1 reduces the icon size on the desktop or the font sizes within one of the supported application windows.
-
Page 123: Fn Sticky Key
FN sticky key You can use the Toshiba Accessibility Utility to make the FN key sticky, that is, you can press it once, release it, and they press an “F number” key. To start the Toshiba Accessibility Utility, click [Start] - [All Programs] - [TOSHIBA] - [Utilities] - [Accessibility]. -
Page 124: Numeric Mode
The Keyboard Numeric mode To turn on the Numeric mode, press FN + F11. The Numeric mode indicator lights. Now try numeric data entry using the keys in figure 5-1. Press FN + F11 again to turn off the overlay. Figure 5-1 The numeric keypad overlay Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard... -
Page 125: Temporarily Changing Modes
The Keyboard 3. Release FN to return to normal keyboard operation. Temporarily changing modes If the computer is in Numeric mode, you can switch temporarily to Arrow mode by pressing SHIFT. If the computer is in Arrow mode, you can switch temporarily to Numeric mode by pressing SHIFT. -
Page 126: Chapter 6 Power And Power-Up Modes
Chapter 6 Power and Power-up Modes The computer’s power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power-up modes. Power conditions The computer’s operating capability and battery charge status are affected by the power conditions: whether an AC adaptor is connected, whether a... -
Page 127: Power Indicators
• LED: Battery trigger point blinking orange DC IN off Battery charge is Computer goes into exhausted hibernation or shuts down (depending on the Toshiba power Management Utility Setting) No battery • No operation installed •LED: Battery off DC IN off... -
Page 128: Dc In Indicator
Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. The battery recharges the RTC batteries. The battery maintains the state of the computer when you enable Resume. -
Page 129: Real Time Clock Battery
The computer’s RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of. - Page 130 Power and Power-up Modes Danger: Indicates an imminently hazardous situation, Which could result in death or serious injury, if you do not follow instructions. Warning: Indicates a potentially hazardous situation, Which could result in death or serious injury, if you do not follow instructions. Caution: Indicates a potentially hazardous situation, Which if not avoided, may result in moderate or minor injury or property damage.
- Page 131 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture. 3. Make sure the battery is securely installed in the computer before attempting to charge the battery pack.
-
Page 132: Charging The Batteries
The Battery indicator glows orange when the battery is being charged. Use only the computer connected to an AC power source or the optional TOSHIBA Batteries charger to charge the battery pack. Never attempt to charge the battery pack with any other charger... -
Page 133: Battery Charging Notice
Power and Power-up Modes Time The following table shows the approximate time required to fully charge a discharged battery. Charging time (hours) Battery type Power on Power off Battery pack (3 cell) 8 hours or more 3 hours Battery pack (6 cell) 8 hours or more 3 hours Battery pack (9 cell) -
Page 134: Monitoring Battery Capacity
Power and Power-up Modes Monitoring battery capacity Remaining battery power can be monitored in Power Options. ■ Wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time. The computer needs this time to check the battery’s remaining capacity and to calculate the remaining operating time, based on the current power consumption rate and remaining battery capacity. -
Page 135: Retaining Data With Power Off
Power and Power-up Modes Retaining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods. Retention Time Battery type State and Retention Time Battery pack (3 cell) about 18 hours (sleep mode) about 7 days (shutdown mode) Battery pack (6 cell) -
Page 136: Replacing The Battery Pack
Power and Power-up Modes Replacing the battery pack When the battery pack reaches the end of its operating life you will need to install a new one. If the Battery indicator flashes orange shortly after fully recharging the battery, the battery pack needs to be replaced. You might also replace a discharged battery pack with a charged spare when you are operating your computer away from an AC power source. -
Page 137: Installing The Battery Pack
7. Pull the battery pack forward to remove it. For environmental reasons, do not throw away a spent battery pack. Please return spent battery pack to your TOSHIBA dealer. Installing the battery pack To install a battery pack, follow the steps below. -
Page 138: Starting The Computer By Password
Power and Power-up Modes Starting the computer by password If you have already registered a password, please enter the password manually to start the computer: To start up the computer with the user password, follow these steps: 1. Turn on the power as described in Chapter 3, Getting Started. -
Page 139: System Auto Off
Power and Power-up Modes System auto off This feature turns the system off automatically if it is not used for a set duration. The system shuts down in sleep mode or hibernation mode in windows. User’s Manual 6-14... -
Page 140: Chapter 7 Hw Setup And Passwords
TOSHIBA HW Setup allows you to configure settings for General, Password, Display, CPU, Boot Priority, Keyboard, USB, LAN, and LED. If the supervisor password is set, access to the TOSHIBA HW Setup program can be prevented when the user password is used to log on to the computer. -
Page 141: User Password
HW Setup and Passwords General This window displays the BIOS version and contains two buttons: Default and About. Default Returns all HW Setup values to the factory settings. About Displays the HW Setup version. Setup This field displays the installed BIOS version and date. Password User Password This option allows you to set or reset the user password for power on. -
Page 142: Power On Display
HW Setup and Passwords To delete a user password: 1. Select Not Registered to display the following prompt: Enter Password: 2. Enter the currently registered password. The character string you enter is displayed as a string of asterisks. Enter Password: **** 3. -
Page 143: Boot Priority
HW Setup and Passwords Dynamic CPU Frequency Mode This option lets you choose from the following settings: Dynamically CPU power consumption and clock speed Switchable automatic switching function is enabled. When the computer is in use, CPU operation is automatically switched when necessary. (Default) Always Low CPU power consumption and clock speed... -
Page 144: Legacy Usb Support
HW Setup and Passwords ExpressCard HDD boot is not supported. To change the boot drive, follow the steps below. 1. Hold down F12 and boot the computer. 2. Use the up/down cursor keys to select boot device you want and press ENTER. - Page 145 HW Setup and Passwords Wake-up on LAN This feature lets the computer’s power be turned on when it receives a wake-up signal from the LAN. Enabled Enables the Wake-up on LAN.(Default) Disabled Disables the Wake-up on LAN. Do not install or remove an optional memory module while Wake-up on LAN is enabled.
-
Page 146: Chapter 8 Optional Devices
Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility. The following optional devices are available from your TOSHIBA dealer: Cards/Memory ■ PC Card ■ ExpressCard ■ SD, SDHC, MS, MS Pro, MMC memory cards ■... -
Page 147: Pc Card/Expresscard
Optional Devices PC Card/ExpressCard Installing a PC Card/ExpressCard The PC card/ExpressCard slot is located on the left side of the computer. You can install one PC card/ExpressCard in the slot. Windows’ hot-install feature allows you to install PC card/ExpressCard while the computer’s power is on. Do not install a PC card/ExpressCard while the computer is in sleep or hibernation mode. -
Page 148: Removing A Pc Card/Expresscard
Optional Devices Removing a PC card/ExpressCard To remove the PC card/ExpressCard, follow the steps below. 1. In Windows Vista™, open the Safely Remove Hardware icon on the system tray and disable the PC card/ExpressCard. 2. Press Eject button slightly to make PC card/ExpressCard stretch out. 3. -
Page 149: Multiple Digital Media Card Slot
Optional Devices Multiple digital media card slot The computer is equipped with a multiple digital media card slot that can accommodate Secure Digital (SD)/ Secure Digital High Capacity (SDHC)/ Memory Stick (MS)/Memory Stick Pro (MS Pro)/Multi Media Card (MMC) memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, that use SD/SDHC/MS/MS Pro/MMC memory cards. -
Page 150: Removing A Sd/Sdhc/Ms/Ms Pro/Mmc Card
Optional Devices ■ Keep foreign objects out of the multiple digital media card slot. A pin or similar object can damage the computer's circuitry. ■ Make sure the SD/SDHC/MS/MS Pro/MMC card is oriented properly before you insert it. ■ Memory Stick Duo/PRO Duo and the Memory Stick adaptor are not compatible with the multiple digital media card slot. -
Page 151: Memory Expansion
Optional Devices ■ Make sure the multiple digital media card slot indicator is out before you remove the card or turn off the computer’s power. If you remove the card or turn off the power while the computer is accessing the card you may lose data or damage the card. - Page 152 Optional Devices Figure 8-5 Removing the cover 6. Insert the memory module into the connector on the computer. Press the module carefully and firmly to ensure a solid connection. 7. Push the module down so that it lies flat and is secured by two latches.
-
Page 153: Removing Memory Module
Optional Devices Figure 8-7 Pushing the memory module down 8. Seat the cover and secure it with one screw. 9. When you turn the computer on, it should automatically recognize the total memory capacity. Use the HW Setup program to verify that the added memory is recognized. -
Page 154: Additional Battery Pack (3 Cell, 6 Cell And 9 Cell)
Optional Devices Figure 8-8 Removing the memory module 7. Seat the cover and secure it with one screw. Additional battery pack (3 cell, 6 Cell and 9 Cell) You can increase the portability of the computer with additional battery packs (3 Cell:PA3533U-1BRS/PA3533U-1BAS), 6 Cell: PA3534U- 1BRS/PA3534U-1BAS, 9 Cell: PA3535U-1BRS/PA3535U-1BAS). -
Page 155: Hdmi
Optional Devices The hibernation and sleep feature can be used with an external monitor. Simply enable hibernation and sleep and the computer will maintain the data as it is displayed on the external monitor. 1. Connect the monitor to the external monitor port. 2. -
Page 156: Setting For Display Video On Hdmi
Optional Devices Figure 8-9 Connecting a HDMI cable 2. Plug the other end of the HDMI cable into the HDMI out port on your computer. Setting for display video on HDMI To view video on the HDMI device, be sure to configure the following settings otherwise you may find that nothing is displayed. - Page 157 Optional Devices Attach one end of a cable to the desk and the other end to the security lock slot on the right side of the computer. Figure 8-10 Security lock User’s Manual 8-12...
-
Page 158: Troubleshooting
Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring. -
Page 159: Preliminary Checklist
Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer. -
Page 160: Hardware And System Checklist
Troubleshooting The problems may be caused by your software or Software diskette. If you cannot load a software package, the media (usually a diskette) may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation. -
Page 161: Self Test
When the computer starts up, the self-test will be run automatically, and the following will be displayed: TOSHIBA Leading Innovation>>> This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system. -
Page 162: Ac Power
Troubleshooting AC power If you have trouble turning on the computer with the AC adaptor connected, check the DC IN indicator. Refer to Chapter 6, Power and Power-up Modes for more information. Problem Procedure AC adaptor doesn’t Check the connections. Make sure the cord is power the computer firmly connected to the computer and a power (DC IN indicator does... -
Page 163: Password
Troubleshooting Problem Procedure Check the Battery indicator. If it does not glow, make the computer charge the battery for at least 20 minutes. If the Battery indicator glows after 20 minutes, make the battery continue to charge at least another 20 minutes before turning on the computer. -
Page 164: Lcd Panel
Troubleshooting LCD panel Apparent LCD problems may be related to the computer’s setup. Refer to Chapter 7, HW Setup and Passwords, for more information. Problem Procedure No display Press hot keys FN + F5 to change the display priority, to make sure it is not set for an external monitor. -
Page 165: Cd-Rw/Dvd-Rom Drive
The Grand Tour If you have trouble writing, make sure you are Cannot write correctly observing the following precautions: ■ Use only media recommended by TOSHIBA ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording. -
Page 166: Dvd Super Multi(+-R Dl) Drive
If you have trouble writing, make sure you are Cannot write correctly observing the following precautions: ■ Use only media recommended by TOSHIBA ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording. -
Page 167: Hd Dvd-Rom Drive
Tour. If you have trouble writing, make sure you are Cannot write correctly observing the following precautions: ■ Use only media recommended by TOSHIBA ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording. -
Page 168: Hd Dvd-Rw Drive
If you have trouble writing, make sure you are Cannot write correctly observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording. -
Page 169: Diskette Drive
Troubleshooting Diskette drive Problem Procedure Drive does not operate There may be a faulty cable connection. Check the connection to the computer and to the drive. Some programs run The software or hardware configuration may be causing a problem. Make sure the hardware correctly but others do configuration matches your software needs. -
Page 170: Usb Mouse
Troubleshooting Problem Procedure The mouse pointer Try changing the speed setting in the mouse moves too fast or too control utility. slow 1. Open the Control Panel, select the Mouse icon and press ENTER. 2. Click the Pointer Option tab. 3. -
Page 171: Pc Card/Expresscard
Troubleshooting Problem Procedure 1. Open the Control Panel, select the Mouse icon and press ENTER. 2. Click the Buttons tab. 3. Set the double-click speed as instructed and click OK. The mouse pointer Try changing the speed setting in the mouse moves too fast or too control utility. -
Page 172: External Monitor
Troubleshooting Problem Procedure You cannot read a file Make sure the target file is on the memory card inserted in the slot. If problems persist, contact your dealer. External Monitor Refer also to Chapter 8, Optional Devices, and to your monitor’s documentation. -
Page 173: Usb
Troubleshooting Refer also to your USB device’s documentation. Problem Procedure USB device does not Check for a firm cable connection between the work USB ports on the computer and the USB device. Make sure the USB device drivers are properly installed. -
Page 174: Sleep/Hibernation
Troubleshooting Problem Procedure A CONNECT display is Check the error control setting in your quickly replaced by NO communications application. CARRIER You can also use the AT\N command. Character display In data transmission, make sure the parity bit and becomes garbled during stop bit settings correspond with those of the a communication remote computer. -
Page 175: Wireless Lan
Recovery Media” section in this manual. You will be directed to select “Restore Original Factory Image” from the drop-down menu. If you have not created “Recovery Media”, please contact TOSHIBA support for assistance. User’s Manual 9-18... -
Page 176: Toshiba Support
Troubleshooting TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system so it is important that you investigate other sources of assistance first. -
Page 177: Where To Write
Troubleshooting Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed on the below. Outside of Europe Europe Australia Germany & Austria TOSHIBA Australia Pty. Ltd. -
Page 178: Cpu
5°C to 30°C (41°F to 86°F) or > 25°C (77°F) at high altitude (all temperature references are approximate and may vary depending on the specific computer model-please refer to your PC documentation or visit the Toshiba website at www.pcsupport.toshiba.com for details). -
Page 179: Memory (Main System)
For optimum performance, use your computer product only under recommended conditions. Read additional restrictions in your product documentation. Contact Toshiba technical service and support, refer to TOSHIBA support section in chapter 9, Troubleshooting for more information. -
Page 180: Battery Life
This is a normal phenomenon for all batteries. To purchase a new battery pack, see the accessories information that is shipped with your computer, or visit the Toshiba web site at www.pcsupport.toshiba.com. HDD drive capacity 1 Gigabyte (GB) means 10 = 1,000,000,000 bytes using powers of 10. -
Page 181: Wireless Lan
Disclaimers Wireless LAN The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. The actual transmission speed will be lower than the theoretical maximum speed. - Page 182 Appendixes Table of Contents Specifications................A-1 Appendix A Display Controller and Modes............ B-1 Appendix B V.90/V.92..................C-1 Appendix C Wireless LAN................. D-1 Appendix D AC Power Cord and Connectors..........E-1 Appendix E User’s Manual Appendixes-1...
-
Page 183: Specifications
Appendix A Specifications This appendix summarizes the computer’s technical specifications. Environmental requirements Operating Non-operating Ambient temperature 5°C to 35°C -20°C to 60°C Relative humidity 20% to 80% 10% to 90% Altitude (from sea level) 0 to 3,000 meters 0 to 10,000 meters Power requirements AC adaptor 100-240 volts AC... - Page 184 Specifications Built-in modem The ability of this feature is depending on the model you purchased. Network control unit (NCU) Type of NCU Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer’s speaker Communication specifications...
-
Page 185: Display Controller And Modes
Appendix B Display Controller and Modes Display controller The display controller interprets software commands into hardware com- mands that turn particular pixels on or off. The controller is an advanced Video Graphics Array (VGA) that provides Super VGA (SVGA) and Extended Graphics Array (XGA) support for the internal LCD and external monitors. -
Page 186: Video Modes
Display Controller and Modes Video modes The computer supports video modes defined in the table below. If your application offers a selection of mode numbers that do not match the num- bers on the table, select a mode based on, resolution, number of colors and refresh rates. - Page 187 Appendix C V.90/V.92 The TOSHIBA internal modem uses V.90 technology. The modem is capable of downstream speeds of 56Kbps (kilobits per second) when connected to an Internet service provider that supports V.90/V.92. As with any modem, the actual throughput (speed of data transfer) depends on analog telephone line conditions, which can vary considerably.
- Page 188 V.90/V.92 Table Result codes for a V.90 connection Result code Description CONNECT 32000 EC* Connection at 32000 bits/s CONNECT 36000 EC* Connection at 36000 bits/s CONNECT 40000 EC* Connection at 40000 bits/s CONNECT 44000 EC* Connection at 44000 bits/s CONNECT 48000 EC* Connection at 48000 bits/s CONNECT 52000 EC* Connection at 52000 bits/s...
- Page 189 V.90/V.92 V42bis V.42 error control and V.42bis data compression V.42 error control only NoEC No error control protocol AT Command -V90=* V.90 Dial Line Rate -V90 sets the maximum V.90 downstream that the modem attempts to connect -V90=0 V.90 disabled -V90=1 V.90 enabled: automatic speed selection - maximum modem speed(default)
-
Page 190: Card Specifications
Appendix D Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card specifications ■ Mini Card Form Factor ■ IEEE 802.11 Standard for Wireless LANs Compatibility ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. - Page 191 Subject to the radio regulations that apply in your country/region, your Wireless LAN card may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for infor- mation about the radio regulations that apply in your country/region.
- Page 192 Wireless LAN When installing Wireless LAN cards, the channel configuration is managed as follows: ■ For wireless clients that operate in a Wireless LAN infrastructure, the Wireless LAN card will automatically start operation at the channel identified by the Wireless LAN Access Point. When roaming between different access points the station can dynamically switch to another channel if required.
- Page 193 Wireless LAN countries/regions that in which these channels can be used. These channels are available to A/B/G combo type only. Available Area: US (USA, CANADA) only. User’s Manual...
-
Page 194: Ac Power Cord And Connectors
Appendix E AC Power Cord and Connectors The AC input plug of power cord must be compatible with various interna- tional AC power outlets. Power cords need to meet the local standards and the specifications listed as below: Length: Minimum 1.7 meters Wire size: Minimum 0.75 mm Current rating:... - Page 195 AC Power Cord and Connectors In Europe, two conductors power cords must be VDE type, H05VVH2-F or H03VVH2-F; while three conductors be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be 2-15P (250V) or 1-15P (125V); while three pin be 6-15P (250V) or 5-15P (125V) as designated in the U.S.
- Page 196 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ANSI: American National Standards Institute APM: advanced power manager ASCII: American Standard Code for Information Interchange BIOS: basic input output system CD-ROM: Compact Disc Read Only Memory CD-RW: Compact Disc ReWritable...
- Page 197 Glossary I/O: input/output IrDA: Infrared Data Association IRQ: interrupt request KB: kilobyte LCD: liquid crystal display LED: light emitting diode LSI: large scale integration MB: megabyte OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect RAM: random access memory RGB: red, green, and blue ROM: read only memory RTC: real time clock...
- Page 198 Glossary ANSI: American National Standards Institute. An organization established to adopt and define standards for a variety of technical disciplines. For example, ANSI defined the ASCII standard and other information processing requirements. antistatic: A material used to prevent the buildup of static electricity. application: A group of programs that together are used for a specific task such as accounting, financial planning, spreadsheets, word processing and games.
- Page 199 Glossary cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time.
- Page 200 Glossary Composite Video (YUV): A standard video signal used to transmit images, e.g. from a VCR to a TV. computer program: A set of instructions written for a computer that enable it to achieve a desired result. computer system: A combination of hardware, software, firmware, and peripheral components assembled to process data into useful information.
- Page 201 Glossary Digital Audio: An audio compression standard that enables high-quality transmission and real-time playback of sound files. disk drive: The device that randomly accesses information on a disk and copies it to the computer’s memory. It also writes data from memory to the disk.
- Page 202 (FDD): An electromechanical device that reads and writes to floppy diskettes. Fn-esse: A TOSHIBA utility that lets you assign functions to hot keys. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
- Page 203 FN, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
- Page 204 Glossary K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte. KB: See kilobyte. keyboard: An input device containing switches that are activated by manually pressing marked keys.
- Page 205 Glossary monitor: A device that uses rows and columns of pixels to display alphanumeric characters or graphic images. See also CRT. motherboard: A name sometimes used to refer to the main printed circuit board in processing equipment. It usually contains integrated circuits that perform the processor’s basic functions and provides connectors for adding other boards that perform special functions.
- Page 206 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Saver Utility: A TOSHIBA utility that lets you set the parameters for various power-saving functions. printed circuit board (PCB): A hardware component of a processor to which integrated circuits and other components are attached.
- Page 207 Glossary ROM: Read Only Memory: A nonvolatile memory chip manufactured to contain information that controls the computer’s basic operation. You cannot access or change information stored in ROM. S-Video: Short for Super-Video, a type of connection used by S-VHS videocassette players, camcorders, DVD players, etc. to transmit high-quality video signals.
- Page 208 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. touchpad: A pointing device integrated into the TOSHIBA computer palm rest. TTL: Transistor-transistor logic. A logic circuit design that uses switching transistors for gates and storage.
- Page 209 Index Checklist equipment, 1-1 AC adaptor, 1-8, 2-5, A-1 problems, 9-2, 9-3 DC IN 19V port, 2-5 Cleaning the computer, 4-42 additional, 1-16, 8-9 COM port, 4-37 connecting, 3-2 problems, 9-5 safety instructions, -ii, -xxxi DC IN ASCII characters, 5-7 connecting, 3-2 Auto power on, See Power indicator, 6-3...
- Page 210 5-4 port, 1-9 hibernate, 5-4 problems, 9-15 lock, 5-3 output/display, 5-4 power plan, 5-3 FN + 1 (TOSHIBA zooming utility sleep, 5-3 reduce), 5-4 sound mute, 5-3 FN + 2 (TOSHIBA zooming utility TOSHIBA zooming utility enlarge), 5-5...
- Page 211 Index FN sticky key, 5-5 Numeric keypad, See Keypad function keys, 5-2 overlay hot keys, 5-3 HW Setup, 7-5 problems, 9-6 Optical disc drives typewriter keys, 5-1 using, 4-2 Windows special keys, 5-5 Keypad overlay, 1-11, 5-5 arrow mode, 5-5 Password numeric mode, 5-6 power on, 1-11...
- Page 212 2-2 LAN, 9-17 LCD panel, 9-7 TOSHIBA Assist, 1-14 modem, 9-16 TOSHIBA Disc Creator, 4-29 overheating power down, 9-4 TOSHIBA PC Diagnostic Tool, 1-13 password, 9-6 TOSHIBA support, 9-19 power, 9-4 TOSHIBA zooming utility, 1-13 recovery discs, 9-18 Touchpad...