hit counter script

Battery Types - Toshiba PSPA3C-SD402E User Manual

User manual
Table of Contents

Advertisement

Power and Power-Up Modes

Battery types

The computer has two types of batteries:
Battery pack
Real Time Clock (RTC) battery
Battery pack
When the AC adapter is not connected, the computer's main power source
is a removable lithium ion battery pack, also referred to in this manual as
the battery.
You can purchase additional battery packs for extended use of the
computer away from an AC power source.
The battery is a disposable item. When its operation becomes short even
when fully charged, replace it with a new one.
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as
required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.
Do not remove the Battery Pack while the computer is in Standby mode.
Data is stored in RAM, so if the computer loses power, it will be lost.
Real Time Clock battery
The Real Time Clock (RTC) battery provides power for the internal real
time clock and calendar. It also maintains the system configuration.
If the RTC battery becomes completely discharged, the system loses this
data and the real time clock and calendar stop working. The following
message appears when you turn on the power:
The computer's RTC battery is a lithium battery and should be replaced
only by your dealer or by a TOSHIBA service representative. The battery
can explode if not properly replaced, used, handled or disposed of.
Dispose of the battery as required by local ordinances or regulations.
When this error appears, the following action is recommended.
1. Plug in AC over 24 hours.
2. Press F2 to enter BIOS setup menu.
3. Set correct time and date.
If you still see this error message after performing the above action, please
get contact you service representative.
6-4
ERROR 0271:Check date and time settings.
WARNING 0251:System CMOS checksum bad - Default
configuration used.
Press <F1> to resume, <F2> to Setup.
User's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pspaau-01200sPspadc-ma605cPspagu-00j00xP100

Table of Contents