Advertisement
Quick Links
Download this manual
See also:
Manual
Quick Install Guide
Wireless N750
Dual Band Gigabit Router
Cloud Router 2500
Start Here
To configure your router, go to the Manual Setup Section below and
follow the steps.
Important for Manual Setup: For the quick setup wizard to work properly, you
must have a working Internet connection. Ensure that you are able to use your
computer to get on the Internet before disconnecting your computer from your
modem.
Manual Setup
1
Modem
INTERNET
Turn off and unplug your cable or DSL
broadband modem.
5
Modem
INTERNET
Reconnect the power adapter to your
cable or DSL broadband modem and wait
for two minutes.
Technical Support
If you experience issues registering this Router with your mydlink account, try
performing a hard reset by using an unfolded paperclip to press and hold the reset
button for 10 seconds while the Router is powered on. This may be necessary if
you have purchased an open box or resold unit.
U.S. and Canadian customers can contact D-Link technical support through our web site or by
phone. You can find software updates and user documentation on the D-Link website as well
as frequently asked questions and answers to technical issues.
Before you contact technical support, please have the following ready:
• Model number of the product (e.g. DIR-836L)
• Hardware Revision (located on the label on the bottom of the product (e.g. rev A1))
• Serial Number (s/n number located on the label on the bottom of the product).
2
Router
USB
WPS
1
2
3
4
INTERNET
POWER
5V 2.5A
Modem
Computer
Position your router close to your modem and a computer.
Place the router in an open area of your intended work area
for better wireless coverage.
6
Computer
Router
Modem
USB
WPS
1
2
INTERNET
3
4
INTERNET
POWER
5V 2.5A
Connect the supplied power adapter into the power port on
the back of the router and then plug it into a power outlet
or surge protector. Press the power button and verify if the
power LED is lit.
Package Contents
DIR-836L Wireless N750 Dual
Band Gigabit Router
Power Adapter
Ethernet Cable
If any of the above items are missing, please contact your reseller.
Note: Please go to http://www.dlink.com/support
to download the user manual.
DIR-836L
Tips for PPPoE and USB connections:
If you have DSL and are connecting via PPPoE, make sure that you disable or uninstall any PPPoE
software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able
to connect to the Internet.
You can only use the Ethernet port on your modem. If you were using USB to connect before, then
you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the
Internet port on the router, then turn the modem back on. In some cases, you may need to call
your ISP to change connection types (USB to Ethernet).
3
USB
WPS
1
2
3
4
INTERNET
POWER
5V 2.5A
Router
Computer
Unplug the Ethernet cable from your modem (or
existing router if upgrading) that is connected to your
computer. Plug it into the black port labeled 1 on the
back of your router. The router is now connected to your
computer.
7
Open a web browser and enter http://dlinkrouter.local.
When the Welcome screen appears, click Next to continue
and follow the Setup Wizard to configure your router. Please
refer to the user manual for more detailed installation
information and advanced features.
©2012 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link
Corporation or its subsidiaries in the United States and/or other countries. Other trademarks or registered trademarks are the
property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11n and 802.11g specifications.
Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building
United States
materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely
Telephone: (877) 453-5465
affect wireless signal range. Product specifications, size and shape are subject to change without notice, and actual product
Internet: http://support.dlink.com
appearance may differ from that depicted on the package. Visit dlink.com (US) or dlink.ca (Canada) for more details. iPhone, iPad,
and iPod touch are registered trademarks of Apple Inc.
Canada
Telephone: (800) 361-5265
Internet: http://support.dlink.ca
LEDs (from top to bottom)
Power LED - A solid green light indicates
a proper connection to the power supply.
The light will blink green during the WPS
process. The light will be solid orange during
boot up.
Internet LED - A solid light indicates
connection on the Internet port. If the LED
is orange, the connection is good but the
router cannot connect to the Internet.
4
Computer
Router
Modem
INTERNET
Plug one end of the included blue Ethernet cable that came with your
router into the yellow port labeled INTERNET on the back of the router.
Plug the other end of this cable into the Ethernet port on your modem.
8
Computer
Modem
USB
WPS
1
2
INTERNET
3
4
INTERNET
POWER
5V 2.5A
DIR-836L Router
This is a sample network configuration of the setup after you have
completed all the setup steps.
USB
WPS
1
2
3
4
INTERNET
POWER
5V 2.5A
Laptop
Version 1.1 (October 17, 2012)
Advertisement
