Table of Contents
Advertisement
Starting a dishwashing cycle
1. Check that the spray arms can turn freely.
2. Turn the water tap on fully.
3. Press the ON/OFF button.
4. Select the desired cycle.
The programme indicator comes on. The remaining time expected for
the cycle will be shown in the multi-display.
3
During the dishwashing cycle, the remaining time shown in the multi-
display may be adjusted according to the size of the load, degree of
soiling, etc.
5. Close the door. The dishwashing cycle will begin.
1
After the cycle has started, do not open the door again, to prevent
scalds and damage to units from escaping steam. Only open the door
when the cycle has ended.
Setting the Delay Timer
3
With the delay timer you can delay the start of a dishwashing cycle for
between 1 and 19 hours.
1. Press the Delay Timer button repeatedly until the multi-display shows
the desired time delay, for example, 12h, if the cycle is to start in
12 hours. The Delay Timer indicator is lit.
2. Select dishwashing cycle.
3. The time remaining until the start of the cycle is continuously displayed
(e. g., 12h, 11h, 10h, ... 1h etc.).
4. Close the door.
To change the delay timer:
As long as the cycle has not yet started, you can still change the setting
by pressing the Delay Timer button after opening the door.
Cancelling the time delay:
Press the Delay Timer button repeatedly until the length of the selected
cycle appears in the multi-display. The selected dishwashing cycle will
begin immediately.
To change a dishwashing cycle
As long as the cycle has not yet started, you can still change the dish-
washing cycle. First cancel the dishwashing cycle, then re-set the time
delay, lastly select the new dishwashing cycle.
22
Advertisement
Table of Contents
