Table of Contents
Advertisement
Switching off the dishwasher
When the dishwasher cycle has ended, the dot shaped light signal
below the door of the appliance goes out.
If the acoustic signal has been enabled, a continuous tone will sound
for approx. 15 seconds at the end of the dishwashing cycle.
If the dishwasher door is not opened, the acoustic signal will repeat af-
ter 3 minutes and again after 6 minutes.
With some dishwashing cycles, the drying fan continues to run even af-
ter the end of the cycle.
1
Carefully open the door. Hot steam may escape.
• Hot dishes are sensitive to knocks. Therefore leave the dishes to cool
for about 15 minutes before removing them. You also get a better
drying result.
• Dishes dry more quickly if you open the door for a moment after the
cycle has ended and then leave it slightly open.
1. Press the ON/OFF button. All display indicators will go out.
2. Turn off the water tap.
Removing the dishes
3
It is normal for the inner door and the dispensers to be damp.
• Empty the lower basket first, then the upper basket. This way you
avoid dripping water from the upper basket onto dishes in the lower
basket.
• The dishwasher's interior light will always be on when the door of the
appliance is open. Therefore, in order to save energy, you should al-
ways close the door of the dishwasher after having loaded or re-
moved dishes.
Care and cleaning
1
Do not use furniture care products or aggressive cleaners.
• When necessary, clean the dishwasher's controls with a soft cloth and
clean warm water.
• Occasionally check the internal dispensers, door seal and water inlet
filter (if fitted) for dirt and clean them, if necessary.
28
- Quick Links:
- Control Panel
- Technical Data
Hide quick links:
Advertisement
Table of Contents
