hit counter script

Advertisement

Quick Links

EN FREEZER
A62000GNW0
USER MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for AEG A62000GNW0

  • Page 1 EN FREEZER A62000GNW0 USER MANUAL...
  • Page 2 Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly. Along with a wide range of accessories...
  • Page 3: Table Of Contents

    Contents CONTENTS 4 Safety information 6 Control panel 9 First use 9 Daily use 10 Helpful Hints and Tips 11 Care and cleaning 12 What to do if… 14 Technical data 14 Installation 18 Environmental concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to...
  • Page 4: Safety Information

    Safety information SAFETY INFORMATION In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the ap- pliance are thoroughly familiar with its operation and safety features.
  • Page 5: Daily Use

    Safety information • It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel to avoid hazard.
  • Page 6: Control Panel

    Control panel Installation For electrical connection carefully follow the instructions given in specific paragraphs. • Unpack the appliance and check if there are damages on it. Do not connect the appli- ance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing.
  • Page 7: Switching Off

    Control panel Temperature warmer button Display It is possible to change predefined sound of buttons to a loudly one by pressing together Mode button and Temperature colder button for some seconds. Change is reversible. Display 3 4 5 Timer function FROSTMATIC function Minute Minder function Child Lock function...
  • Page 8: Child Lock Function

    Control panel 1. Press the Mode button until the corresponding icon appears. The FROSTMATIC indicator flashes. The freezer temperature indicator shows symbol. 2. Press the OK button to confirm. The FROSTMATIC indicator is shown. An animation starts. This function stops automatically after 52 hours. To switch off the function before its automatic end: 1.
  • Page 9: First Use

    First use 2. The Child Lock indicator flashes. 3. Press the OK button to confirm. The Child Lock indicator is shown. To switch off the function: 1. Press the Mode button until the Child Lock indicator flashes. 2. Press the OK button to confirm. 3.
  • Page 10: Helpful Hints And Tips

    Helpful Hints and Tips The maximum amount of food that can be frozen in 24 hours is specified on the rating plate, a label located on the inside of the appliance. The freezing process lasts 24 hours: during this period do not add other food to be frozen. Storage of frozen food When first starting-up or after a period out of use, before putting the products in the com- partment let the appliance run at least 2 hours on the higher settings.
  • Page 11: Care And Cleaning

    Care and cleaning • do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter; • lean foods store better and longer than fatty ones; salt reduces the storage life of food; •...
  • Page 12: Defrosting Of The Freezer

    What to do if… Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is recommended that the outer casing of this appliance is only cleaned with warm water with a little washing-up liquid added. After cleaning, reconnect the equipment to the mains supply.
  • Page 13: Closing The Door

    What to do if… Problem Possible cause Solution The compressor operates The temperature is not set cor- Set a higher temperature. continually. rectly. The door is not closed correctly. Refer to "Closing the door". The door has been opened too Do not keep the door open longer frequently.
  • Page 14: Technical Data

    Technical data After approximately 20 minutes the drain hose at the rear of the cabinet starts to dis- charge water into the drip tray. To prevent the water overflowing from the drip tray dry with a sponge. The defrosting process ends when the water stops dripping.
  • Page 15: Electrical Connection

    Installation units. Accurate levelling is ensured by one or more adjustable feet at the base of the cabi- net. If the cabinet is placed in a corner and the side with the hinges facing the wall, the distance between the wall and the cabinet must be at least 10 mm to allow the door to open enough so that the shelves can be removed.
  • Page 16 Installation WARNING! This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed. The wires in the mains lead are coloured in accordance with the following code: Green and Yellow: Earth Brown: Live Blue: Neutral As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:...
  • Page 17: Door Reversibility

    Installation WARNING! A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely. Rear spacers Inside the appliance you find two spacers which must be fitted as shown in the figure. Slacken the screws and insert the spacer under the screw head, then retighten the screws.
  • Page 18: Environmental Concerns

    Environmental concerns Slide the door off the pin (G). Unscrew the pin (G) and install it on the opposite side. Unscrew the pivot pin (Z) of the hinge (E) and the rear screw (Y) with a spanner of 10 mm and remove the closing device (M).
  • Page 19 for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.
  • Page 20 222355871-A-452010...

Table of Contents