Page 1
TravelMate 610 Service Guide Service guide files and updates are available on the AIPG/CSD web; for more information, please refer to http://csd.acer.com.tw PART NO.: 49.41Q04.001 DOC. NO.: SG363-0103A PRINTED IN TAIWAN...
Revision History Please refer to the table below for the updates made on TravelMate 610 service guide. Date Chapter Updates 04/172001 Chapter 1 Change video memory “Up to 11MB SDRAM (4MB dedicated display cache combined with Intel(R) DVMT)"...
Page 4
Conventions The following conventions are used in this manual: Denotes actual messages that appear Screen messages on screen. NOTE Gives bits and pieces of additional information related to the current topic. WARNING Alerts you to any damage that might result from doing or not doing specific actions.
Page 5
DIFFERENT part number code to those given in the FRU list of this printed Service Guide. You MUST use the list provided by your regional Acer office to order FRU parts for repair and service of customer machines.
Table of Contents Chapter 1 System Specifications Features ............1 System Block Diagram .
Page 8
Table of Contents Disassembling the CD-ROM drive Module ......54 Removing the Extended Memory ........55 Removing the Modem Board .
Page 9
Table of Contents Microsoft Windows 2000 Environment Test ......112 Windows ME Environment Test ........115 Appendix C Online Support Information Index...
Chapter 1 System Specifications Features This computer was designed with the user in mind. Here are just a few of its many features: Performance Intel Coppermine/Pentium® III processor featuring Intel® SpeedStep™ technology Integrated 256 KB level 2 cache 64-bit memory bus Removable high-capacity, Enhanced-IDE hard disk Removable optical drive (CD-RW or DVD-ROM is standard) External USB floppy drive...
Page 12
Human-centric Design and Ergonomics Sleek, smooth and stylish design Full-sized keyboard Ergonomically-centered touchpad pointing device with scroll function Internet scroll key Expansion One Type II CardBus PC Card (formerly PCMCIA) slot One SmartBus slot Upgradeable memory Removable drives (hard disk and optical drive) EasyPort port replicator Chapter 1...
Board Layout Top View Item Description Item Description Video Port KBC/Super I/O LAN/Modem Connecto CN19 Internal Keyboard Connector Port Replicator CN22 Primary Battery Connecto Line-out port Mainboard Setting Line-in/ MIC-in port CN21 HDD Board Connector USB 0 Port CN18 RTC Battery Connector USB 1 Port BIOS ROM PS/2 Port...
Panel Ports allow you to connect peripheral devices to your computer as you would with a desktop PC. Front Panel Icon Item/ Port Description Display screen Also called LCD (liquid-crystal display), displays computer output. Status indicators LEDs (light-emitting diodes) that turn on and off to show th status of the computer and its functions and components.
Left Panel Icon Item/ Port Description PCMCIA (PC card) port Connects to one Type II 16-bit PC card or 32-bit cardbus PC card. PC card eject button Ejects PC card from the card slot. Smart card slot Slot for smart card interface with pre-boot authentication systems.
Right Panel Icon Item/ Port Description Video capture kit slot Accepts the video capture kit option on the right side of the computer. Battery bay Houses the computer’s battery pack. AcerMedia drive bay Houses the computer’s removable media drive (CD-RW, CD-ROM, DVD-ROM, or 2nd hard disk).
Rear Panel Icon Item/ Port Description Power jack Connects to an AC adapter. PS/2 port Connects to any PS/2-compatible device (e.g., PS/2 keyboard/ mouse/ keypad). USB ports (two) Connects to any Universal Serial Bus devices (e.g., USB mouse, USB camera). Line-in jack Accepts audio line-in devices (e.g., audio CD player, stereo walkman).
Bottom Panel Icon Item/ Port Description Serial number label Your computer’s unique serial number. AcerMedia drive bay Unlatches to release the AcerMedia drive from its bay. release latch AcerMedia drive Your computer’s removable media storage. Personal identification Insert a business card or similar-sized identification card to slot personalize your computer.
Indicators The computer has seven easy-to-read status icons below the display screen. The Power and Sleep status icons are visible even when you close the display cover so you can see the status of the computer while the cover is closed. Icon Function Description...
Keyboard The keyboard has full-sized keys and an embedded keypad, separate cursor keys, two Windows keys and twelve function keys. Special keys Lock keys The keyboard has three lock keys which you can toggle on and off. Lock key Description Caps Loc When Caps Lock is on, all alphabetic characters typed are in uppercase.
Page 23
Embedded numeric keypad The embedded numeric keypad functions like a desktop numeric keypad. It is indicated by small characters located on the upper right corner of the keycaps. To simplify the keyboard legend, cursor-control key symbols are not printed on the keys. Desired Access Num lock on Num lock of...
Page 24
Hot Keys The computer employs hot keys or key combinations to access most of the computer’s controls like screen brightness, volume output and the BIOS Utility To activate hot keys, press and hold the Fn key before pressing the other key in the hot key combination. Hot key Icon Function...
Page 25
Hot key Icon Function Description Brightness down Decreases the screen brightness. Euro Types the Euro symbol (available on some Gr-Euro models. The Euro symbol If your keyboard layout is set to United States-International or United Kingdom or if you have a keyboard with a European layout, you can type the Euro symbol on your keyboard.
Hardware Specifications and Configurations Main board Major Chips Item Controller System core logic 82815EM/ ICH2-M Super I/O controller Kahuna Audio controller ALC200 Video controller Intel Solano2-M IDE controller ICH2- Keyboard controller Kahuna ICH2- PCMCIA Controller OZ711 Processor Item Specification CPU type Intel Coppermine 800 MHz ~ 1 GHz processor with 256 Kbytes on-die L2 cache CPU package...
Page 27
System Memory Item Specification Memory controlle Built-in 82815E Onboard memory size 0 MB DIMM socket numbe 2 sockets Supports memory size per socket 128 MB Supports maximum memory size 256MB (128MB x 2) Supports DIMM type SDRAM Supports DIMM speed 100 MHz Supports DIMM voltage 3.3V...
Page 28
Modem Interface Item Specification Modem Interface/Chipset MDC interface/ Built in ICH2-M AC’97 2.1 compliant digital controller interface Fax modem data baud rate (bps) 14.4K Data modem data baud rate (bps) Supports modem protocol V.90 data modem 56K, V.90 fax modem 14.4K and digital line protection operation Modem connector type RJ11...
Page 29
CD-R/W Interface Item Specification Buffer memory 2 MB Interface ATAPI Applicable disc format CD-DA, CD-ROM (Mode-1, Mode-2), CD-ROM XA MODE-2 (FORM-1, FORM- 2), Multi-Session Photo CD, CD-I, Video CD, Enhanced CD & CD PLUS Compatible, CD-R/W Loading mechanis Drawer with soft eject and emergency eject hole Power Requirement Input Voltage DVD-ROM Interface...
Page 30
Video Interface Item Specification Chip voltage 1.8V Supports ZV (Zoomed Video) port Graph interface DVO I/F Maximum resolution (LCD) 1024x768 (24 bit colors) Maximum resolution (CRT) 1024x768 (24 bit colors) Video Memory Item Specification Fixed or upgradeable W986432AH-7 SDRAM-133MHz Video memory size 11MB Video Resolutions Mode Resolution...
Page 31
PCMCIA Port Item Specification PCMCIA controller O2 Micro OZ711 CardBus controller (Tarzan) Supports card type Type II/I Number of slots One type II One for smart card (upper with HDD frame) Access location Left side Supports ZV (Zoomed Video) port Supports 32 bit CardBus Smart Card CardBus Interface Item...
Page 32
DC-AC LCD Inverter Item Specification Vendor & model name Ambit T62I194.00 Sumida IV002 (IV09117/T) Input voltage (V) 7.5 ~ 21V Input current (mA) 1000mA max 400 mA max Output voltage (Vrms, no load) 1450Vrm 1400Vrm Output voltage frequency (kHz 45K-80K Hz 55K-65K Hz Output Current/Lamp 6.0 mA max...
Page 33
AC Adapter Item Specification Efficiency It should provide an efficiency of It should provide an efficiency of 83 83% minimum, when measured at minimum, when measured at maximum maximum load under 115V(60Hz). load under 115V(60Hz). Output Ratings (CV mode DC output voltage 19 +1.5/-0 V 19 +1.5/-0 V Noise + Ripple...
Page 34
Power Management Power Saving Mode Phenomenon Standby Mode The buzzer beeps Waiting time specified by the The Sleep indicator lights up System Standby value or the operating system elapses without any system activity Closing the display cover When the computer is about to enter Hibernation mode (e.g., during a battery-low condition), but the Hibernation file is invalid...
Page 35
Mechanical Specifications Item Specification Dimensions 308(W) x 247(D) x 24.5~29.9(H) mm for 14.1” TFT Weight 5 lbs for 14.1” TFT model I/O Ports One type II PCMCIA (PC card) slot or one SmartBus slot, two USB ports, one PS/2 keyboard/mouse port, one RJ11 port, one RJ45 port, one VGA port, on line-out jack, one line-in/microphone-in jack, one 100-pin port-replicator connector Drive Bays...
Page 36
I/O Address Map I/O Address Function 376, 3F6 Intel ICH2-M PCI BusMaster IDE Controller 378, 37F Parallel port 278, 27F Paraller port 1 (optional) 3BC-3BF Paraller port 1 (optional) 3B0-3BB Video Controller 3C0-3DF 3F0h-3F7 Standard Floppy Disk Controller 4D0-4D1 PCI configuration register CF8-CFF IRQ Assignment Map Interrupt Channel...
Chapter 2 System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/ Output System). Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup.
System Information The System Information screen displays a summary of your computer hardware information. NOTE: The screen above is a sample and may not reflect the actual data on your computer. The following table describes the information in this screen Parameter Description CPU Type &...
Basic System Settings The Basic System Settings screen allows you to set the system date and time. The following table describes the parameters in this screen Parameter Description Format System Date Sets the system date. DDD MMM DD, YYYY (day-of-the-week month day, year) System Time Sets the system time.
Startup Configuration The Startup Configuration screen contains parameter values that define how your computer behaves on system startup. The following table describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings Parameter Description Options IDE Primary Master Pres Enter to access the IDE Primary Master sub menu.
IDE Primary Master The IDE Primary Master sub-menu contains parameters related to the primary hard disk. CAUTION: The parameters in this screen are for advanced users only. Typically, you do not need to change the values in this screen. The default setting of Auto optimizes all the settings for your hard disk. IDE Secondary Master The IDE Secondary Master sub-menu contains parameters related to the AcerMedia bay drive.
Onboard Devices Configuration The Onboard Devices Configuration sub-menu contains parameters that are related to computer hardware. CAUTION: The parameters in this screen are for advanced users only. Typically, you do not need to change the values in this screen because these values are already optimized. The following table describes the parameters in this screen.
PCI IRQ Routing The PCI IRQ Routing sub-menu allows you to set IRQs for PCI devices. CAUTION: The parameters in this screen are for advanced users only. Typically, you do not need to change the values in this screen because these values are already optimized. Chapter 2...
System Security The System Security screen contains parameters that help safeguard and protect your computer from unauthorized use. The following table describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings Parameter Description Options Set Supervisor Password When set, this password protects the BIOS Utility and Notebook Manager from unauthorized use.
Use the cursor up/ down keys to highlight a password parameter (Setup, Power-on or Hard Disk) and press the Enter key. The password box appears. Enter the current password and press Enter. Press Enter twice without entering anything in the new field and confirm password fields to remove the existing password.
Exit Setup This menu contains exit options. The following table describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings Parameter Description Exit Saving Changes Saves your changes and exits the BIOS Utility. Exit Discarding Changes Discards your changes and exits the BIOS Utility.
BIOS Flash Utility The BIOS flash memory update is required for the following conditions: New versions of system programs New features or options Use the AFlash utility to update the system BIOS flash ROM. NOTE: Do not install memory-related drivers (XMS, EMS, DPMI) when you use AFlash. NOTE: This program contains a readme.txt file.
HIMEM.SYS RAMDRIVE.SYS Read Panel ID Setting This function will display registered information on the panel ID of Acer TravelMate 610 series. Then, Panel ID is set to EEPROM. Write Panel ID Setting This function will write a default LCD panel ID into EEPROM.
Page 49
It is allowed to input 4 bytes on the manufacture name and will revise the record into EEPROM automatically. Write MBD UUID The MBD includes 32 bytes stored in EEPROM. There are two sub-functions: Create and write a new UUID This function is used when the original UUID is lost or damaged.
The diagnostics program here that we used is called PQA (Product Quality Assurance) and is provided by Acer Headquarters. You can utilize it as a basic diagnostic tool. To get this program, either download it from http://csd.acer.com.tw or find it in the TravelMate 610 service CD kit.
Insert Smart Card into the socket of the left panel. If it is doing well, the message "PASSED!!!" will be shown on the screen. Infrared Ray (IR) Test This function will test Infrared Ray of Acer TravelMate 610 series. Following are the steps: Please prepare 2 machines. Choose "Test_program for Server" for one of the machines and choose "1" for Baud_Rate.
Page 52
Vx_x xx-xx-xx Diag Result Option SysInfo Exit Diag TEST MULTI TEST FULL TEST QUICK TEST One Test performs a single test and Manual checks the selected test items in sequence. Multi Test performs multiple tests of the selected items and check the selected test items in sequence. Full Test performs all test items in detail for your system.
Page 53
Vx_x xx-xx-xx Diag Result Option SysInfo Exit Diag Test Items MANUAL TEST [ ] System Board AUTO TEST [ ] Memory [ ] Keyboard [ ] Video [ ] Parallel Port [ ] Serial Port [ ] Diskette Drive SPACE: mark/unmark selecting item [ ] Hard Disk : return to upper menu [ ] CD-ROM...
Chapter 3 Machine Disassembly and Replacement This chapter contains step-by-step procedures on how to disassemble the notebook computer for maintenance and troubleshooting. To disassemble the computer, you need the following tools: Wrist grounding strap and conductive mat to prevent electrostatic discharge Flat-bladed screwdriver Phillips screwdriver Hexagonal screwdriver...
General Information Before You Begin Before proceeding with the disassembly procedure, make sure that you do the following: Turn off the power to the system and all peripherals. Unplug the AC adapter and all power and signal cables from the system. Chapter 3...
Disassembly Procedure Flowchart The flowchart on the succeeding page gives you a graphical representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicing. For example, if you want to remove the system board, you must first remove the keyboard, then disassemble the inside assembly frame in that order.
Page 58
0k000007 Rev. 0A U p p e r C a s e CZ2 L 001114 Rev. A Left A n t e n n a 1 x A B o a r d T o u c h p a d F r a m e Right A n t e n n a...
Removing the Hard disk drive Module See “Removing the Battery Pack” on page 51 To remove the hard disk drive, first remove the screw from the hard disk drive bezel, then remove the cover. Then carefully remove the hard disk drive module from the machine. Disassembling the Hard disk drive Module See “Removing the Battery Pack”...
Page 61
Disconnect the connector from the hard disk drive module. Chapter 3...
Removing the CD-ROM Drive Module See “Removing the Battery Pack” on page 51 Push the CD-RW release button forward, then slide the CD-RW drive out from the machine at the same time. Disassembling the CD-ROM drive Module See “Removing the Battery Pack” on page 51 See “Removing the CD-ROM Drive Module”...
Removing the Extended Memory See “Removing the Battery Pack” on page 51 To remove the extended memory from the machine, first loosen two screws from the memory cover. Then lift the cover off and remove it from the main unit. Push out the latches on both sides of the socket and pull the memory module from the socket.
Removing the Modem Board See “Removing the Battery Pack” on page 51 See “Removing the Extended Memory” on page 55 Remove two screws from the modem board and then remove the modem board from the main board at CN17. Disconnect the modem cable from the modem board carefully. Chapter 3...
Disassembling the LCD To avoid the risk of the LCD damage, we suggest you to place the protected Mylar film on the LCD surface before disassembly. Removing the Middle Cover See “Removing the Battery Pack” on page 51 To remove the middle cover, first remove the two screws from the middle cover on the rear panel. Push the LCD module to an angle of 135 degrees,as shown, to release the middle cover from left to right.
Removing the Keyboard See “Removing the Battery Pack” on page 51 See “Removing the Middle Cover” on page 57 To remove the keyboard, first remove the screw from the main unit. Pull the three latches downward to lift the keyboard upward and expose it. Disconnect the keyboard cable from the main board at CN20, then carefully remove the keyboard from the main unit.
Removing the LCD Module See “Removing the Battery Pack” on page 51 See “Removing the Middle Cover” on page 57 See “Removing the Keyboard” on page 58 Remove the two screws from the LCD FPC cable and then disconnect the LCD FPC cable from the mainboard.
Removing LCD Bezel See “Removing the Battery Pack” on page 51 See “Removing the Middle Cover” on page 57 See “Removing the Keyboard” on page 58 See “Removing the LCD Module” on page 59 Remove three LCD plugs and then the three screws from the LCD bezel. Snap off the LCD bezel carefully then remove the LCD bezel from the module.
Disconnect the LCD power cable from the inverter. Disconnect the inverter cable from the inverter. Removing the LCD See “Removing the Battery Pack” on page 51 See “Removing the Middle Cover” on page 57 See “Removing the Keyboard” on page 58 See “Removing the LCD Module”...
Then remove the LCD from the LCD panel. Gently remove the ESD tape and disconnect the LCD coaxial cable from the LCD. Removing the LCD Hinges See “Removing the Battery Pack” on page 51 See “Removing the Middle Cover” on page 57 See “Removing the Keyboard”...
Page 71
Then remove the two LCD hinges from the LCD panel. Chapter 3...
Disassembling the Upper Case Removing the RTC Battery See “Removing the Battery Pack” on page 51 See “Removing the Middle Cover” on page 57 See “Removing the Keyboard” on page 58 See “Removing the LCD Module” on page 59 Remove the RTC Battery from the main board gently. Removing the LAN Board See “Removing the Battery Pack”...
Remove the wireless LAN board from the main board. Disconnect the touchpad cable from the main board at CN18. Removing the Upper Case See “Removing the Battery Pack” on page 51 See “Removing the Middle Cover” on page 57 See “Removing the Keyboard” on page 58 See “Removing the LCD Module”...
Disassembling the Lower Case Removing the Smart Card Bracket See “Removing the Battery Pack” on page 51 See “Removing the Middle Cover” on page 57 See “Removing the Keyboard” on page 58 See “Removing the LCD Module” on page 59 See “Removing the LAN Board”...
To remove the HDD transfer board, first disconnect the right speaker cable and microphone cables from the HDD transfer board. Disconnect the left cable from the HDD transfer board. 10. Remove three screws on the HDD transfer board from the main board and detach HDD transfer board. Removing the Microphone See “Removing the Battery Pack”...
Remove the microphone from the lower case. Removing the Speakers See “Removing the Battery Pack” on page 51 See “Removing the Middle Cover” on page 57 See “Removing the Keyboard” on page 58 See “Removing the LCD Module” on page 59 See “Removing the LAN Board”...
See “Removing the Smart Card Bracket” on page 66 See “Removing the HDD Transfer Board” on page 66 Remove the front panel from the lower case. Removing the Fan See “Removing the Battery Pack” on page 51 See “Removing the Middle Cover” on page 57 See “Removing the Keyboard”...
Remove the two screws then detach the fan from the thermal module. Removing the CPU See “Removing the Battery Pack” on page 51 See “Removing the Middle Cover” on page 57 See “Removing the Keyboard” on page 58 See “Removing the LCD Module” on page 59 See “Removing the LAN Board”...
Remove the screw as shown here and then detach the thermal charger bracket from the main board. Removing the Main board See “Removing the Battery Pack” on page 51 See “Removing the Middle Cover” on page 57 See “Removing the Keyboard” on page 58 See “Removing the LCD Module”...
Remove the two screws as shown then detach the left and right antenna boards from the upper case. Removing the Touch Pad See “Removing the Battery Pack” on page 51 See “Removing the Middle Cover” on page 57 See “Removing the Keyboard” on page 58 See “Removing the LCD Module”...
Page 81
Remove the touch pad board from the upper case. Remove the touch pad button and scroll key from the upper case. 10. Then, remove the touch pad FPC cable from the upper case. Chapter 3...
Troubleshooting Use the following procedure as a guide for computer problems. NOTE: The diagnostic tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false errors and invalid system responses. Obtain the failing symptoms in as much detail as possible.
System Check Procedures External Diskette Drive Check Do the following to isolate the problem to a controller, driver, or diskette. A write-enabled, diagnostic diskette is required. NOTE: Make sure that the diskette does not have more than one label attached to it. Multiple labels can cause damage to the drive or cause the drive to fail.
The following auxiliary input devices are supported by this computer: Numeric keypad External keyboard If any of these devices do not work, reconnect the cable connector and repeat the failing operation. Memory Check Memory errors might stop system operations, show error messages on the screen, or hang the system. Boot from the diagnostics diskette and start the PQA program (please refer to “Running PQA Diagnostics Program”...
Power off the computer. Remove the battery pack and measure the voltage between battery terminals 1(ground) and 7(BT+). See the following figure If the voltage is still less than 7.2 Vdc after recharging, replace the battery. To check the battery charge operation, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer.
Power-On Self-Test (POST) Error Message The POST error message index lists the error message and their possible causes. The most likely cause is listed first. NOTE: Perform the FRU replacement or actions in the sequence shown in FRU/Action column, if the FRU replacement does not solve the problem, put the original part back in the computer.
Error Message List Error Messages FRU/Action in Sequence Previous boot incomplete - Default Run “Load Default Settings” in BIOS Setup Utility. configuration used RTC battery Main Board Memory size found by POST differed from Run “Load Default Settings” in BIOS Setup Utility. CMOS DIMM Main Board...
Page 89
Index of Symptom-to-FRU Error Message Error Message List No beep Error Messages FRU/Action in Sequence No beep, power-on indicator turns off and LCD Power source (battery pack and power adapter). See “Power is blank. System Check” on page 77. Ensure every connector is connected tightly and correctly. Reconnect the DIMM.
Index of Symptom-to-FRU Error Message No beep Error Messages FRU/Action in Sequence No beep, power-on indicator turns off and LCD Power source (battery pack and power adapter). See “Power is blank. System Check” on page 77. Ensure every connector is connected tightly and correctly. Reconnect the DIMM.
Page 91
LCD-Related Symptoms Symptom / Error Action in Sequence LCD has extra horizontal or vertical lines LCD inverter I displayed. LCD inverter LCD cabl Main Board Indicator-Related Symptoms Symptom / Error Action in Sequence Indicator incorrectly remains off or on, but Reconnect the inverter board system runs correctly Inverter board...
Page 92
Speaker-Related Symptoms Symptom / Error Action in Sequence In Windows, multimedia programs, no sound Audio driver comes from the computer. Speake Main Board Internal speakers make noise or emit n Speake sound. Main Board Power Management-Related Symptoms Symptom / Error Action in Sequence The system will not enter hibernation Keyboard (if control is from the keyboard...
Page 93
Peripheral-Related Symptoms Symptom / Error Action in Sequence Print problems. Ensure the “Parallel Port” in the “Onboard Devices Configuration” of BIOS Setup Utility is set to Enabled. Onboard Devices Configuration Run printer self-test. Printer driver Printer cable Printer Main Board Serial or parallel port device problems.
System Check” on page 77): Power-off the computer. Visually check them for damage. If any problems are found, replace the FRU. Remove or disconnect all of the following devices: Non-Acer devices Printer, mouse, and other external devices Battery pack Hard disk drive...
Index of AFlash BIOS Error Message Error Message Action in Sequence Hardware Error See “System Diagnostic Diskette” on page 42 VPD Checksum Error Reboot the system and then restart with this diskette. BIOS Update Program Erro Turn off the power and restart the system. System Error Make sure this AFlash BIOS diskette for this model.
Hard Disk Transfer Board Top view Item Description Item Description Right Speaker Microphone Cable Connector Left Speaker HDD Transfer Board Cable Connector Chapter 5...
Hard Disk Transfer Board Bottom view Item Description Item Description Hard Disk Driver Connector Power Switch Hard Disk Driver Board Connector FIR Port...
FRU parts for repair and service of customer machines. NOTE: To scrap or to return the defective parts, you should follow the local government ordinance or regulations on how best to dispose it, or follow the rules set by your regional Acer office on how to return it.
Page 105
Picture Partname Description Part No. CPU COPPERMINE PIII IC CPU COP850/256 OD 01.COPRM.85 850MHZ 256K INTEL 1.6 UPGA2 CPU COPPERMINE PIII IC CPU COP800/256 OD 01.COPRM.80I 800MHZ 257K INTEL 1.6 UPGA2 Memory MEMORY SDIMM 128 SDIMM 128 72.16S64.C0N MITSUBISHI MH16S64AVS-7TA MEMORY SDIMM 128M NEC SODIMM 128MB 72.17128.D0N...
Page 106
Picture Partname Description Part No. LCD HINGE RIGHT 610_HINGE-R 34.41Q04.00 LCD INVERTER INVERTER 14" IV09117T 19.21030.D51 V.1 610 LCD PANEL 14.1"LCD_PANNEL_MOD 60.41Q05.00 ULE 610 LCD RUBBER CSN LCD RUBBER 520 47.41C03.001 LCD RUBBER CAMERA RUBBER CAMERA TM340 47.40F07.002 LCD SCREW M2*L3 SCRW BIND M2*L3 B-ZN 86.9A322.3R0 SHIVA...
Page 107
Picture Partname Description Part No. LCD CABLE C.A. COAXIAL 18/20PIN(F 50.41Q08.00 LCD HINGE LEFT 610_HINGE-L 34.41Q05.00 LCD HINGE RIGHT 610_HINGE-R 34.41Q04.00 INVERTER INVERTER 13" T62I194.00 19.21030.D61 LCD PANEL 14.1" 60.41Q05.00 LCD_PANNEL_MODULE LCD RUBBER CSN LCD RUBBER 520 47.41C03.001 LCD RUBBER CAMERA RUBBER CAMERA TM340 47.40F07.002 LCD SCREW M2*L3 SCRW BIND M2*L3 B-ZN...
Appendix A Model Definition and Configuration TravelMate 610 Model Number Definitions Hard Disk Floppy Disk Model Memory CD/DVD-ROM Battery Drive Drive 610TXV 14.1” TFT PIII-800MHz 128MB 20GB 8X DVD External LiIon 610TXVi 14.1” TFT PIII-800MHz 128MB 20GB 8X DVD External LiIon 610TXR 14.1"...
Appendix B Test Compatible Components This computer’s compatibility is tested and verified by Acer’s internal testing department. All of its system functions are tested under Windows 98SE, Windows 2000 , and Windows ME environment. Refer to the following lists for components, adapter cards, and peripherals which have passed these tests.
USR Megahertz 56K mode ISDN USR Megahertz ISDN 128K IBM ISDN Internet PC Card I/O Peripheral I/O Display IBM 9514-B04 TFT Monito Acer TFT monitor NEC 20” Color Monitor Acer 211c ViewSonic PF790 I/O - Keyboard Chicony Keyboard (USB) IBM Numeric Keyboard III...
Page 119
BLASTER USB BLASTER Modem 56K V.90 I/O - USB (Joystick) USB Rockfire Avant Garde Flightstick Microsoft SIDEWINDER Precision PRO (USB) I/O - USB Camera Acer USB Video capture Kit Intel Digital Camera Kodak DVC 300 (Digital-Video-Camera) IBM, IBM PC Camera I/O Adapter...
Page 121
Item Specifications I/O - Mous IBM PS Style Mouse (Black) Logitech USB Wheel Mouse Acer Aspire USB mouse (USB) Fu Hwa USB mouse (USB Microsoft InteliMouse optical Logitech PS Style Mouse Microsoft Inteli Mouse USB IBM ThinkPad Mobile Mouse Microsoft InteliMouse Explorer Logitech MouseMan Wheel USB Comb for DOSV &iMac...
Page 122
Item Specifications USB Device Nokia Cellular Data Suite 1.2 (support IR) w/ 6150 Nokia Card Phone Nokia Cellular Data Card (PCMCIA) w/ 8110 or 6150 Motorola, Digital Cellular Fax and Data Modem CELLect 3 GSM/ DCS1800 w/ cd928+ Ericsson, Mobile Office DC23 w/ PH38 Ericsson Mobile Office DI27 w/ GF768 Appendix B...
USR Megahertz 56K mode ISDN USR Megahertz ISDN 128K IBM ISDN Internet PC Card I/O Peripheral I/O Display IBM 9514-B04 TFT Monito Acer TFT monitor NEC 20” Color Monitor Acer 211c ViewSonic PF790 I/O - Keyboard Chicony Keyboard (USB) Compaq, Compaq Keyboard...
Page 124
Item Specifications I/O - Mous IBM PS Style Mouse (Black) Logitech USB Wheel Mouse Acer Aspire USB mouse (USB) Fu Hwa USB mouse Microsoft InteliMouse optical Logitech PS Style Mouse Microsoft Inteli Mouse USB IBM ThinkPad Mobile Mouse Microsoft Intelli Mouse Explore...
Page 125
Item Specifications PCMCIA USB Device Nokia Cellular Data Suite 1.2 (support IR) w/ 6150 Nokia Card Phone Nokia Cellular Data Card (PCMCIA) w/ 8110 or 6150 Motorola, Digital Cellular Fax and Data Modem CELLect 3 GSM/ DCS1800 w/ cd928+ Ericsson, Mobile Office DC23 w/ PH38 Ericsson Mobile Office DI27 w/ GF768 Appendix B...
This section describes online technical support services available to help you repair your Acer Systems. If you are a distributor, dealer, ASP or TPM, please refer your technical queries to your local Acer branch office. Acer Branch Offices and Regional Business Units may access our website. However some information sources will require a user i.d.
Page 129
Index Disassembly Procedure Flowchart DMA Channel Assignment AC Adapter AFLASH Utility Audio Environmental Requirements Auxiliary Input Device Check Error Messages Error Symptoms Indicator Battery Battery Pack Memory Removing PCMCIA BIOS Power Power Management BIOS Setup Utility Speaker 29–?? BIOS Utility Error Symptom-to-Spare Part Index Basic System Settings Navigating...
Page 130
Intermittent Problems PCMCIA Port Inverter Board POST removing Power Management IrDA Port Display Standby Mode Hard Disk Standby Mode IRQ Assignment Map Hibernation Mode Standby Mode Power System Check Jumpers Battery Pack Bottom View Power Adapter Top View Power System Checkout 12, 22 Keyboard Processor...
Page 131
Windows 2000 Environment Test Windows 98 Environment Test Windows Millenium Environment Test Index...