Table of Contents
Advertisement
How to wash correctly
H Start the programme
^ Press the flashing Start/Stop button.
The estimated programme duration will
appear in the display once the pro-
gramme has started. During the first 8
minutes the machine measures how
much water is being absorbed by the
laundry. The programme duration may
be longer or shorter depending on this
absorbency rate.
The programme sequence is also
shown in the display. The washing ma-
chine shows you when each section of
the programme is reached.
I Remove the laundry when the pro-
gramme has finished
In the anti-crease phase after the pro-
gramme has finished, the following will
appear alternately in the display:
0:00
Anti-crease
and
0:00
Finish
^ Press the Door button to open the
drum door.
^ Remove the laundry.
18
Check that all items have been re-
moved from the drum. Items left in
the drum could discolour other items
in the next wash or become disco-
loured themselves.
^ Check the folds in the door seal for
any small articles, e.g. buttons which
might be lodged there.
^ Switch the machine off with the
I-On/0-Off button.
^ Close the drum door. Otherwise there
is the danger of objects being placed
inadvertently in the drum. If these re-
mained unnoticed and were washed
in the next load, they could damage
the laundry.
- Quick Links:
- Control Panel
- Fault Messages in the Display
Hide quick links:
Advertisement
Table of Contents
