Sensors And Actuators - Brother MFC9700 Service Manual
Multi-function center
Hide thumbs
Also See for MFC9700:
- Owner's manual (228 pages) ,
- Quick setup manual (4 pages) ,
- Brochure & specs (2 pages)
Table of Contents
Advertisement
2.3
Sensors and Actuators
This machine has 13 sensors: 10 photosensors*, two thermistors, and a mechanical switch as
described below.
*
(
Models supporting a 2nd paper cassette have two more photosensors--2nd registration sensor and 2nd
cassette sensor.)
Sensor name
Document front sensor
Document rear sensor
Document tray open sensor
CCD HP sensor
Manual insertion sensor
Registration sensor
Cassette sensor
Paper ejection sensor
Toner sensor
Cover sensor
Jam sensor
Heater thermistor
In-casing temperature sensor
•
Document front sensor which detects the presence of documents.
•
Document rear sensor which detects the leading and trailing edges of pages to tell the control
circuitry when the leading edge of a new page has reached the starting position and when the
scan for that page is over.
•
Document tray open sensor which detects whether the document tray is closed.
•
CCD HP sensor which detects whether the CCD unit is placed in the home position.
•
Manual insertion sensor which detects whether paper is inserted manually through the paper slot
or whether paper fed through the paper cassette has jammed.
•
Registration sensor which detects the leading and trailing edges of recording paper, which
allows the controller to determine the registration timing and check paper jam.
•
Cassette sensor which detects whether the paper cassette is loaded.
•
Paper ejection sensor which detects whether the recording paper goes out of the machine.
•
Toner sensor which detects whether there is toner or a toner cartridge is loaded.
•
Cover sensor which detects whether the front cover is closed.
•
Jam sensor which detects whether paper is jammed inside the heat-fixing unit.
•
Heater thermistor which allows the controller to monitor the temperature of the heater roller of
the fixing unit.
•
In-casing temperature sensor which allows the controller to monitor the temperature inside the
machine.
Type
Photosensor
Photosensor
Mechanical switch
Photosensor
Photosensor
Photosensor
Photosensor
Photosensor
Photosensor
Photosensor
Photosensor
Thermistor
Thermistor
III - 10
Located on
Document sensor PCB
Document sensor PCB
Harness support
CCD unit
Engine PCB
Engine PCB
Engine PCB
Paper ejection sensor PCB
Toner sensor (LED) PCB and toner
sensor (light-receiver) PCB
Toner sensor (LED) PCB
Heat-fixing unit
Heat-fixing unit
Left-hand plate of the main chassis
- Quick Links:
- Entry into the Maintenance Mode
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
