Table of Contents
Advertisement
• After the pump calibration is complete a confirmation message is displayed for a few seconds,
then the instrument will return to the titrator calibration menu and will display the new time and
date for the last pump calibration.
Notes: • The calibration of the pump is independent of the selected range and concentration unit.
• If an erroneous situation is encountered during the calibration, an error message is
displayed and the calibration can be restarted by pressing Restart.
• If the calibration doesn't complete within 6 minutes the error message "Too much
standard" will be displayed and the calibration can be restarted by pressing Restart
after a new sample with standard is prepared.
28
Advertisement
Table of Contents
