Connecting The Speakers; Connecting Auxiliary Equipment (Aux In); Connecting Auxiliary Equipment (Line Out); Connecting Control Cable - Hitachi AX-M131U Operating Instructions Manual

Table of Contents

Connecting the Speakers

Connect the speaker cords between the terminals as shown below.

Connect the cords with a silver line to the (-) (G) terminals and cords with a gold line to the (+) (L)

(R) terminals.

This unit also has one group of audio input terminals, you can use signal line to connect this unit's

audio input terminals and assistance equipment's audio output terminals respectively, then you can

hear the sound sources.

This unit also has one group of audio output terminals, you can use signal line to connect this unit's

audio output terminal and assistance equipment's audio input terminal respectively, then you can

output the outer sound sauces to other assistance equipment.

Insert the AC power cord into a wall outlet, and your system is at your command!

Caution: Be sure to unplug the power cord from the outlet when going out or when the system is

not in use for an extended period of time.

Connect a pair of headphones to the phones jack. No sound comes out of the speakers.

Note: Be sure to turn down the volume before connecting or putting on headphones.

Connect the control cable between the CD player and the

amplifier.

- 4 -

Table of Contents

Show Quick Links

Table of Contents