Maintenance and specifications • DO read the operating instructions before you attempt • DON’T continue to operate the equipment if you are in to use the equipment. any doubt about it working normally, or if it is • DO ensure that all electrical connections (including the damaged in any way - switch off, withdraw the mains mains plug, extension leads and inter-connections plug and consult your dealer.
Know your personal CD player Please read these instructions before using your Hi-fi. Top view Information 1. Power/Standby button 2. Mute button 3. Repeat/M-up button 4. Random button 5. X-bass button 6. EQ button 7. Open/Close button 8. Aux button 9.
Connection diagram Your main unit and speakers can be placed on the stands provided (as shown below). Speaker wire - Connect the left speaker FM aerial - extend the cable with the white stripe to the left (L) FM aerial until you get red socket and the completely black wire a good reception.
Using your CD player You can perform some functions using either the buttons on the hi-fi or the remote control. Information Most of the features in this book are described using the remote control. Some of the functions can also be accessed using the Insert batteries Loading a CD...
Page 6
Using the different CD features Play a CD and then press the STOP button before using the MEMORY feature. Information Adjust the volume by pressing the VOLUME buttons. You can erase your Skipping through tracks Programming tracks MODE/REMAIN feature programmed tracks by Press the SKIP/SEARCH/ Press the MEMO/C.ADJ button Press the MODE/REMAIN button...
Page 7
Using the different CD features Information You can connect external sources such as a DVD player to your hi-fi. Use the AUX sockets on the back of the hi-fi to make the Using the REPEAT feature Using the RANDOM feature Using headphones necessary connections.
Using the Tuner Presetting radio stations Find the radio station that you want to make a preset station. Information • Press the MEMO/C.ADJ button on the unit. • Press the REPEAT/M-UP button on the remote control continually to select which preset number Make sure that you the station will be set to.
Setting the clock The clock operates in a 12 or 24 hour format. Setting the clock Setting the daily timer Setting the sleep timer • Press the POWER/STANDBY Use the daily timer to turn the Use the sleep timer to turn your button to put the unit into system on at a set time.
Using other features Information Press the MODE/ REMAIN button on the unit in either CD or tuner mode to show the clock in the display for a few seconds. Using PRESET EQ. Using the Mute feature X-BASS feature If an unusual situation Press the PRESET EQ.(equalizer) Press the MUTE button to Press the X-BASS button on the...
Troubleshooting and specifications Specifications: Troubleshooting: Symptom Cause Action Power: 230V ~ 50Hz Output power: 4.5 watts x 2 No sound. Connections are Change and correct Unit dimension: 90(L) x 258(W) x 190(H) mm incorrect or loose. connections. Frequency range: 88 - 108MHz 540 - 1600kHz Poor radio reception.