Sony STR-DE485 Operating Instructions Manual page 39
Fm stereo
fm.am receiver
Hide thumbs
Also See for STR-DE485:
- Operating instructions manual (88 pages) ,
- Service manual (54 pages) ,
- Product information (2 pages)
Table of Contents
Advertisement
There is no sound
from a specific
component.
• Check that the component
is connected
correctly
to the audio input jacks for lhat componenh
• Check that the cord(s) used _r the connection
is
(are) fully insel_ed in!o the jacks on Ix}th the
receiver and the component.
• Check _hat you have se]_led
lhe correct
component
on
the
receiver.
There is no sound
from one of the front
speakers.
Connect a pair of headphones
Io the PHONES
jack
verify tha_ sound is output from the headphones
(page 21 ).
If only one channel
is output
from the beadphones,
the component
may not be connected
to the
receiver
correctly.
Check that all the cords are fully
inserted into the jacks on both lhe leceiver
and the
coiTiponenL
If both channels
are output from the headphones,
the front speaker
may not be connected
to the
receiver
correctly.
Check Ihe connection
of the
front speaker
which is not outputting
any sound.
The left and right sounds are unbalanced
or
reversed.
• Check that tile speakers
and components
are
connected
correctly
and securely.
• Adjust balance
parameters
in the LEVEL menu.
There is severe hum or noise.
• Check that the speakers
and cornixments
an
connected
secmely.
• Check that tile connecting
cords ale away from a
transti_rrner
or motor, and at least 3 meters away
from a TV set or fluorescent
lighk
• Move your TV away from the audio components.
• Tile plugs and jacks are dirty. Wipe them with a
cloth slightly
moislened
with alcohol.
There is no sound or only a very low level sound
is heard from the center or/and surround
speaker.
• Make sure the sound field function
is on (pless
MODE).
• Selecl a sound field containing
the word
"C.ST.EX"
(pages 24).
• Adjust the speaker
level (page 20).
• Make sure the center
olJand surround
speaker
size parameter
is set to either "SMALL"
or
"LARGE"
(page 17).
There is no sound from the active sub woofer.
Thele
is no sound output from the SUB WOOFER
lemfinal
depending
on the sound field (page 44).
The surround
effect
cannot
be obtained.
Make sure the sound field function
is on (press
MODE).
Dolby
Digital or DTS multi channel
sound
is not
reproduced.
• Check that the playing
DVD, etc. is recorded
in
Dolhy Digital
or DTS forma_.
• When connecting
the DVD player, etc. to the
digital inpat jacks of this receiver, check the
audio setting (settings
for the audio oatpu0
of the
conllected
component.
Recording
cannot
be done.
• Check that tile components
ale connected
correctly.
• Selec_ _he sou_e
componen_
with function
buttons.
• Make sure that INPUT
MODE
is set to
"ANALOG"
(page 21 ) he.re
recording
from a
digit al component
connected
to the analog
MD/I'APE
temlinals.
To connect an LD player via an RF demodulator.
Connect the LD player to the RF demodulator,
_.
then connect
the RF demodulator's
opdca] or
coaxial digital output to the receiver's
jack. When
_.
making this conn_lion,
he sure to set INPUT
,_
MODE manually
(page 2! ). The receiver
may not
Ill
operate correctly
if INPUT MODE
is set to
==
"AUTO
IN".
For de_ails on DOLBY
DIGITAL
RF hookups, see
the operating
instructions
supplied
with your RF
demodulator.
continued
iq
5"
39GB
Hide quick links:
Advertisement
Table of Contents
