Part Code 6610 - HP StorageWorks P9000 - Disk Arrays Manual
Hp storageworks p9000 remote web console messages (av400-96351, january 2011)
Hide thumbs
Also See for StorageWorks P9000 - Disk Arrays:
- Reference manual (399 pages) ,
- Manual (333 pages) ,
- User manual (322 pages)
Table of Contents
Advertisement
Table 55 Error codes (part code 6510) (continued)
Part
Error
Code
Number
6510
69017
6510
69018
6510
69019
6510
69021
6510
69084
Part code 6610
Table 56 Error codes (part code 6610)
Part
Error
Code
Number
6610
5030
6610
5137
6610
5138
6610
5140
6610
5141
6610
5144
6610
7301
6610
7302
6610
7303
6610
7440
6610
8101
6610
9006
Error Message
No more journals can be registered,
because the number of registered
journals has reached the maximum.
There are two or more LDKC numbers
for the specified data volume. In this
operation, please specify only one LDKC
number.
The number of data volumes exceeds the
maximum.
Journals cannot be added to the
extended consistency group (EXCTG),
because the number of EXCTG exceeds
the maximum.
Do you want to release the remote
command device from the mirror?
Error Message
The displayed information has not been
changed.
The Operation value is invalid. Specify
the correct value.
The value specified for Gathering Interval
is invalid. Specify a valid value within
the range of 1 to 15.
The specified CU number is incorrect.
Specify the correct CU number.
The specified LDEV number is incorrect.
Specify the correct LDEV number.
Some of the entered values are incorrect.
Check the values and then specify
correct values.
An error occurred in client logic.
An error occurred in client logic.
An error occurred in client logic.
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
The system cannot apply the new
configuration. Do you want to refresh?
Exchange the channel cable connections
after confirmation of the port type.
Recommended Action
Check the number of registered journals.
Check the LDKC number for the specified
data volume, and specify only one LDKC
number.
Check whether the specified volume is
a LUSE volume. Also, check storage
system's microcode version.
Check the number of registered EXCTG.
To continue the operation, click [OK].
Otherwise, click [Cancel].
Recommended Action
Specify the data that you want to register
in the SVP, and retry the operation.
Check the contents, and retry.
Check the contents, and retry.
Specify the correct CU number.
Specify the correct device number.
Check the values, then specify correct
values.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
If the same error occurs despite retrying,
please contact HP Technical Support.
Click [Refresh], and retry.
Check the port type, then change cable
connections.
Severity
Level
W
W
W
W
W
Severity
Level
W
W
W
W
W
W
E
E
E
E
W
i
Part code 6610
21 1
Advertisement
Table of Contents
