Using Aquos Link - Sharp AQUOS LC-40LE835U Operation Manual
Hide thumbs
Also See for AQUOS LC-40LE835U:
- Brochure (14 pages) ,
- Service manual (110 pages) ,
- Operation manual (93 pages)
Table of Contents
Advertisement
Using AQUOS LINK
Controlling HDMI Equipment Using AQUOS LINK
What's AQUOS LINK?
• Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate
compatible system equipment (Blu-ray disc equipment, AV amplifi er, DVD).
• By connecting AQUOS LINK-compatible devices with HDMI-certifi ed cables to the TV, you can control a
recorder or AV amplifi er using the remote control of the TV.
• AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.
Connecting AQUOS
BD Player via AQUOS
LINK-compatible
Audio system
HDMI-certified cable
AQUOS BD Player
•
For connecting the TV to AQUOS LINK-compatible equipment, use commercially available cables.
•
Point the remote control toward the TV, not to connected HDMI equipment.
•
Video noise may occur depending on the type of HDMI cable used. Make sure to use an HDMI-certifi ed cable.
•
Up to 3 pieces of HDMI recording equipment and one AV amplifi er can be connected using this system.
•
These operations affect the HDMI equipment selected as the current input source. If the equipment does not operate, turn on
the equipment and select the appropriate input source using INPUT.
•
The above description is an example of the AQUOS LINK function.
•
The steps in "AQUOS LINK Setup" on page 59 need to be completed beforehand.
•
Refer to this operation manual and the operation manual of the AQUOS LINK device to be used with this TV.
58
HDMI-certified cable *
* Use HDMI 1 to connect
ARC-compatible equipment.
AQUOS LINK-compatible
Audio system
Connected AQUOS LINK-compatible devices can be operated without
changing the settings of the remote control unit.
OPTION button will function only when AQUOS LINK is used.
■
One Touch Play
While the TV is in standby mode, it automatically turns on and plays back the
image from the HDMI source.
■
One Touch Recording
Press REC while you are viewing a broadcast received with the AQUOS
LINK-compatible recorder. The AQUOS LINK automatically recognizes the
connected HDMI device and starts recording.
■
Single remote control
The AQUOS LINK automatically recognizes the connected HDMI device and
you can control the TV and the devices as if using a universal remote control.
■
Control the AQUOS LINK-compatible audio system
Set the volume of AQUOS LINK-compatible audio system.
Optical fiber cable
Back panel
horizontal inputs
Example
Back panel
vertical inputs
Advertisement
Chapters
Table of Contents
Troubleshooting
