Troubleshooting - 3D Images; Troubleshooting - Error Message - Sharp AQUOS LC-40LE835U Operation Manual
Hide thumbs
Also See for AQUOS LC-40LE835U:
- Brochure (14 pages) ,
- Service manual (110 pages) ,
- Operation manual (93 pages)
Table of Contents
Advertisement
Appendix
Problem
•
No picture
•
Picture quality of HD programs is
poor.
•
The TV sometimes makes a
cracking sound.
• The original home page cannot
be displayed.
• Some Internet functions used on a
PC are not available from the TV.
Troubleshooting - 3D Images
Problem
•
3D images are not displayed.
For further details, refer to the operation manual of your 3D Glasses.
Troubleshooting - Error Message
The example of an error message
displayed on a screen
•
Failed to receive broadcast.
•
No broadcast now.
•
An incompatible audio signal has
been received. Change the output
device audio settings to PCM.
80
•
Is connection to other components correct?
•
Is the correct input selected?
•
Is "On" selected in "Audio Only"?
• If the PC image is not displayed, check the following:
- When connecting a laptop PC to the TV, check that display output mode of the
PC is set to external monitor.
- Check the resolution setting on the PC. Is a non-compatible signal being input?
Page 63
•
To enjoy HD images from external equipment, you are required to set up HDMI
connection or component connection.
•
If the program content is not of HD quality, HD images cannot be displayed. Check
that the program you are viewing provides HD images.
•
The HD cable/satellite set-top box may need to be confi gured to output HD images
via cable/satellite.
•
The cable/satellite broadcast may not support a signal resolution of 1080p.
•
This is not a malfunction. This happens when the cabinet slightly expands and contracts
according to change in temperature. This does not affect the TV's performance.
• Is the ETHERNET cable connected correctly?
• Check the settings of "Internet Setup".
• The TV has only limited functions compared with regular PC browsers.
•
Is "3D Auto Change" set to "No"? Press 3D to switch to 3D mode.
•
If "3D Auto Change" is set to "Yes" but no 3D images are displayed, check the display
format of the content being viewed. Some 3D image signals may not be recognized as 3D
images automatically. Press 3D to select the appropriate display format for the 3D image.
Pages 43 to 44
•
Is the power of the 3D Glasses turned on?
•
Are the 3D Glasses set to 2D mode?
•
Is there an obstacle between the 3D Glasses and the TV, or is something covering
the infrared receiver on the 3D Glasses? The 3D Glasses operate by receiving a
signal from the TV. Do not place anything between the 3D infrared emitter on the TV
and the infrared receiver on the 3D Glasses.
Error code
E202
•
Check the antenna cable. Check that the antenna is correctly setup.
E203
•
Check the broadcast time in the program guide.
—
•
This message is displayed when an audio format other than PCM
is input. (Dolby Digital and DTS audio formats are not supported.)
- Set the audio output format of connected external HDMI
equipment to PCM.
- Refer to the operation manual of the external equipment for
setting details.
Possible Solution
Pages 14 to 18 and 58
Pages 14 and 23
Page 31
Page 66
Pages 68 to 69
Possible Solution
Page 12
Possible Solution
Page 71
Page 45
Advertisement
Chapters
Table of Contents
Troubleshooting
