Advertisement
Available languages
Available languages
Quick Links
DRYER OPERATING iNSTRUCTiONS
Towels CZC_
Normal
_
Perm Press (_D
Delicates _
Touch Up
Timed Dry
Before Operating
Your Dryer
Read your dryer Owner's
Guide.
It has important
safety and warranty information.
It also has many
suggestions for best drying results.
F_
To reduce the risk of fire, electric shock
or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS
in your dryer Owner's Guide before
operating this appliance.
Operating
Steps
Read "Drying Procedures" in your Owner's Guide. It
explains these operating steps in detail.
1. Prepare items for drying.
2. Check that lint filter is clean and in place.
3. Load the dryer. If desired, add a dryer fabric softener
sheet. Close the door.
4. Select the appropriate cycle and settings for each
load.
,, Turn the Cycle Selector knob to select the cycle.
The estimated drying time will be displayed.
,, A suitable drying temperature, dryness level and
options will automatically
be indicated for each
cycle.
See the "Dryer Setting Chart" for more
details.
To change the temperature and dryness level, press
Temperature or Dryness until the desired selections
are made.
,, To select or delete an option, press Options; then,
while the indicator is blinking, press Select. The
indicator will light when the option has been
selected, it will no longer be lighted when the option
has been deleted.
If a temperature,
dryness level or option is not
available for a cycle, it will not light.
0 Maximum
0 ltigh
0 More
Dry
0 Medium
0 Normal
0 Low
0 Less Dry
0 Air Fluff/
ODamp
Dry
No Heat
Temperature
Dryness
0 Shrink
Guard
0 Extended
Tumble
0 Signal
Volume
0 Drying
0 Cool Down
0 Extended Tumble
Canoe
Start/Pause
Towels
Select thisAuto Dry cycle for towelloads.
Heavy Duty
Select this Auto Dry cycle for sturdy work clothes.
Normal
Select this Auto Dry cycle for cotton items.
Perm Press
Select this Auto Dry cycle for cottons and blends with
a no-iron finish.
Delicates
Select thisAuto Dry cycle for knits and delicate items.
PN 134609300B
(0712)
Auto Dry
Auto Dry cycles take the guesswork out of drying time.
Loads dried using the Towels, Heavy Duty, Normal, Perm
Press, and Delicates cycles will dry automatically
at
the selected temperature to the desired dryness level.
The dryer uses sensing bars to sense
the moisture
level of the load as it tumbles through heated air. Auto
Dry cycles save time and energy and protect fabrics.
Select
Options
Cycle
Selection
Turn the Cycle Selector knob to the desired cycle. For
best results, follow the fabric care label instructions on
items to be dried. If the selection is changed after the
cycle starts, the indicator lights will blink, the signal
will beep and "ErF will be displayed.
To change the
selection after the cycle has begun, press Cancel
before making another choice. Just turning the knob
to another selection will not change the cycle. The
signal will beep and the status lights will flash, but the
original cycle will continue.
Room temperature and humidity, type of installation and
electrical voltage or gas pressure can also affect drying
time.
Adjustments to the cycle will be remembered each
time that cycle is selected in the future.
To return to factory settings, press Start/Pause and
Select at the same time and hold until the signal
sounds.
5. Press Start/Pause to begin the cycle.
,, To pause the cycle press Start/Pause. To resume
the cycle, press Start/Pause again.
,, To stop or change the cycle, press Cancel.
6. A signal will sound at the end of the cycle and
periodically
during Extended Tumble when the
Signal option is selected.
When the cycle ends,
remove items immediately and hang or fold.
7. Clean the lint screen after every load.
Drying time varies depending on size and dampness of
load and fabric type. If the load is too small or almost
dry, the sensing bars may net detect enough moisture
to continue the cycle and the cycle may end after a few
minutes. Select a Timed Dry setting to dry such loads.
The estimated drying time will be displayed for about
5 minutes. Then the outside of the displaywill
light up
in a circular
track to indicate
the drying
time is
automatically being determined by the sensors. When
the load has reached the selected dryness level, it will
continue to tumble, unheated, during a Cool Down period.
This helps reduce wrinkling and makes items easier to
handle during unloading.
The estimated Cool Down
time will be displayed.
Advertisement
Related Manuals for Frigidaire LGQ6400FS1
Summary of Contents for Frigidaire LGQ6400FS1
- Page 1 DRYER OPERATING iNSTRUCTiONS Towels CZC_ 0 Maximum 0 ltigh 0 More 0 Medium 0 Normal 0 Shrink Guard Normal 0 Drying 0 Low 0 Less Dry 0 Extended Tumble 0 Cool Down Perm Press (_D 0 Air Fluff/ ODamp 0 Signal Volume 0 Extended Tumble No Heat...
-
Page 2: Cycle Options
Cycle Selection (Con't) Touch Up Note: To prevent over-drying, not every dryness Those adjustments will automatically be remembered Select Touch Up to help remove wrinkles from clean level is available with every cycle. each time that cycle is selected. If a temperature, dry items that may have been left in the dryer, have dryness level or option is not recommened for a cycle, been stored in crowded closets or drawers or unpacked... -
Page 3: Dryer Settings
DRYER SETTINGS CHART AVAILABLE CYCLE SETTINGS - These temperatures, dryness levels and options are available with the following cycles: Towels Heavy Duty Normal Perm Press Delicate Touch Up Timed Dry Estimated 15 to 90 60 minutes 45 minutes 50 minutes 40 minutes 20 minutes 30 minutes... - Page 4 lnstrucciones de Funcionamiento Dei Secador Towels Heavy Duty ([_) 0 High 0 More Dry © Medium © Normal 0 Shrink Guard Normal 0 Drying 0 Extended Tumble 0 Low 0 Less Dry 0 eool Down Perm Press (_) 0 Air Fluff/ 0 Damp Dry 0 Signal Volume 0 txtended...
- Page 5 Selecci6n del Ciclos (Cont.) El ciclo de Secado Sincronizado matar& al 99.9% El indicador de temperatura Fuff/No Heat debe usado solo cuando seleccione programar las bactedas, sin traspaso de bacterias entre cargas. Trabajo pesado manualmente e! tiempo de secado o sea el indicador Se requieren temperaturas...
- Page 6 Caracteristicas de [a secadora Bnicio/Pausa Status Lights Control de cerradura Presione Inicio/Pausa (Start/Pause para) iniciar, detener siguientes indicadores encenderan durante cic!o: o reiniciar un ciclo. Ademas del tiempo estimado restante, Para evitar alguien inicie o pare secadora accidentalmente, presione Options y Select al misrno se mostrara la siguiente...