Adjusting Pos. /Size - Panasonic TH-42LF25U Operating Instructions Manual
Full hd lcd display
Hide thumbs
Also See for TH-42LF25U:
- Operating instructions manual (20 pages) ,
- Specification (3 pages) ,
- Specifications (3 pages)
Table of Contents
Advertisement
Adjusting POS. /SIZE
1
2
3
4
Note:
If a "Cue" or "Rew" signal from a VCR or DVD player is received, the picture position will shift up or down. This picture
position movement cannot be controlled by the POS. /SIZE function.
AUTO
H-POS/V-POS, H-SIZE/V-SIZE, DOT CLOCK and CLOCK PHASE are automatically adjusted when the
SETUP
RGB or PC signal is received.
This setting only operates when a PC signal or RGB signal is input, and the aspect is "FULL".
Using Remote Control
Notes:
• When digital RGB signal input, DOT CLOCK and CLOCK PHASE cannot be made.
• AUTO SETUP may not work when a cropped or dark image is input. In such case, switch to a bright image
with borders and other objects are clearly shown, and then try auto setup again.
• Depending on the signal, out of alignment may occur after AUTO SETUP. Carry out ¿ ne tuning for the
position/size as required.
• If AUTO SETUP cannot set properly for vertical frequency 60Hz XGA signal (1024×768@60Hz and
1366×768@60Hz), pre-selecting the individual signal in "XGA MODE" (see page 39) may results in correct
AUTO SETUP.
• AUTO SETUP does not work well when a signal such as additional information is superimposed out of
valid image period or intervals between synchronizing and image signals are short.
• If AUTO SETUP cannot adjust correctly, select "NORMALIZE" once and press ACTION ( ) then adjust
POS. /SIZE manually.
• If the picture goes off screen in the horizontal direction as a result of performing AUTO SETUP, perform
DOT CLOCK adjustment.
Press to display the POS. /SIZE menu.
Press to select the menu to adjust.
Press to adjust the menu.
Press to exit from adjust mode.
When
on the remote control is pressed, "AUTO SETUP" will be executed.
When AUTO SETUP does not work, "INVALID" is displayed.
POS. /SIZE
NORMALIZE
NORMAL
AUTO SETUP
H-POS
0
0
H-SIZE
0
V-POS
0
V-SIZE
0
CLOCK PHASE
0
DOT CLOCK
OFF
1:1 PIXEL MODE
Note:
Unadjustable items are grayed out.
Adjustable items differ
depending on the input signal
and the display mode.
23
- Quick Links:
- Hdmi Connection
- Power on / off
Hide quick links:
Advertisement
Table of Contents
