Table of Contents
Advertisement
Electrical
Requirements
Volts: 120 A.C. only. Hertz: 60
The wattage
rating for your Stand
Mixer is printed
on the serial plate.
Do not use an extension
cord. If the
power supply cord is too short, have a
qualified
electrician
or serviceman
install an outlet
near the appliance.
Electrical
Shock
Hazard
Plug
into a grounded
3 prong
outlet.
Do not remove
ground
prong.
Do not use an adapter.
Do not use an extension
cord.
Failure
to follow
these
instructions
can result in
death,
fire, or electrical
shock.
Troubleshooting
Problems
Please
read the following
before
calling
your
service
center.
1. The Stand Mixer may warm
up
during
use. Under heavy loads with
extended
mixing time periods, you
may not be able to comfortably
touch the top of the unit. This is
normal.
2. The Stand Mixer may emit a
pungent
odor, especially when
new. This is common
with electric
motors.
3. If the flat beater hits the bowl,
stop the Stand Mixer. See "Beater
to Bowl Clearance,"
page 10.
Keep a copy of the sales receipt
showing
the date of purchase.
Proof
of purchase will assure you of
in-warranty
service.
If your
Stand
Mixer
should
malfunction
or fail to operate,
please
check
the following:
- Is the Stand Mixer plugged
in?
- Is the fuse in the circuit to the Stand
Mixer in working
order? If you have
a circuit breaker box, be sure the
circuit is closed.
- Turn the Stand Mixer off for 10-15
seconds, then turn it back on. If the
mixer still does not start, allow it to
cool for 30 minutes before turning
it
back on.
- If the problem
is not due to one of
the above items, see "Arranging
for
Service" on page 4.
- Do not return the Stand Mixer to
the retailer as they do not provide
service.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
