Miele CVA 5060 Operating And Installation Manual
Built-in coffee machines
Hide thumbs
Also See for CVA 5060:
- Operating and installation instructions (76 pages) ,
- Installation and maintenance manual (40 pages) ,
- User manual (80 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Miele CVA 5060
Summary of Contents for Miele CVA 5060
- Page 1 Operating and installation instructions Built-in coffee machines CVA 5060 CVA 5068 en - GB To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time.
-
Page 2: Table Of Contents
Contents Caring for the environment ......... . 5 Guide to the machine . - Page 3 Miele|home.........
- Page 4 Contents Cleaning and care ..........47 Quick guide .
-
Page 5: Caring For The Environment
Caring for the environment Disposal of the packing Disposal of your old machine material Electrical and electronic machines often contain materials which, if The transport and protective packing handled or disposed of incorrectly, has been selected from materials which could be potentially hazardous to are environmentally friendly for human health and to the environment. -
Page 6: Guide To The Machine
Guide to the machine Exterior view a On/Off sensor for switching the coffee machine on and off b Display c Left arrow, for scrolling through the various programme options d OK sensor, for confirming the selection of a programme option and for saving a setting e Right arrow, for scrolling through the various programme options f Sensor for selecting hot water... -
Page 7: Interior View
Guide to the machine Interior view a Master switch b Ground coffee chute cover c Ground coffee chute d Slide control to select fineness of ground coffee e Coffee bean container f Drip tray with grid for easier carrying g Water container h Brew unit i Waste container j Central spout connector (connecting the brew unit and the central coffee spout) -
Page 8: Accessories Supplied
Accessories supplied Stainless steel milk flask For storing and keeping milk cold, with lid (with handle) and additional cap (not suitable for cleaning in a dishwasher) Containers Large and small containers for cleaning and rinsing the milk pipework Coffee spoon For adding the correct amount of ground coffee Cleaning agent for milk pipework For daily cleaning of the milk pipework... -
Page 9: Optional Accessories
Optional accessories Miele accessories and cleaning and conditioning products are available for your coffee machine. These can be ordered via the internet at www.miele-shop.com, from the Miele Spare Parts Department or from your Miele Dealer. Stainless steel milk flask with cap... -
Page 10: Warning And Safety Instructions
They contain important information on installation, safety, use and The appliance can only be used by maintenance. Miele cannot be held people with reduced physical, sensory liable for damage caused by or mental capabilities, or lack of non-compliance with these Warning experience and knowledge, if they are and Safety instructions. -
Page 11: Technical Safety
Warning and Safety instructions Safety with children Technical safety Before setting up the machine, Caution. The spouts present a check it for any externally visible danger of burning or scalding. damage. Do not install or attempt to Children's skin is very sensitive and use a damaged machine. - Page 12 Faulty components must only be The second electrical connection replaced by genuine Miele original socket on the back of the CVA 5060 spare parts. The manufacturer can only coffee machine may only be used for guarantee the safety of the machine...
-
Page 13: Correct Use
Warning and Safety instructions Correct use – Change the water every day to prevent a build-up of bacteria. Caution. The spouts present a – Do not use mineral water. Mineral danger of burning or scalding. The water will cause serious limescale liquids and steam dispensed are deposits to build up in your machine very hot. - Page 14 Only use the descaling tablets The manufacturer cannot be held supplied by Miele and follow the instructions on the packet carefully. liable for damage caused by non-compliance with these Warning Use the exact proportions recommended.
-
Page 15: Using The Coffee Machine - First Steps
Using the coffee machine - first steps G Maintenance programme for milk The following notes should help you get to know your coffee machine before pipework, brew unit, descaling, starting to use it. rinsing Settings: Customising your Controls machine This machine has sensor controls which ^ The arrow sensors are used to select react to touch. -
Page 16: Switching Off
Using the coffee machine - first steps When you use the machine for the very If everything has been entered first time, you will be prompted to correctly, Set up successful will select a language. appear in the display. ^ Use the right or left arrow until the ^ Confirm this message by touching language you want appears in the the OK sensor. -
Page 17: Filling The Water And Coffee Bean Containers
Filling the water and coffee bean containers The coffee machine must be cleaned thoroughly (see "Cleaning and care") before you fill it with water and coffee beans. It is vital that you programme in the water hardness level of your water (see "Settings: Customising your machine - Setting the water hardness"). -
Page 18: Filling The Coffee Bean Container
Filling the water and coffee bean containers Filling the coffee bean container Only put roasted espresso or coffee beans in the container. Anything else, including ground coffee, will damage the grinder. Do not use coffee beans which have been treated with caramel, sugar or other substances. -
Page 19: Making Drinks
Making drinks Switching on Pre-warming cups When you switch the coffee machine on The cups should always be it will start heating up and the pipework pre-warmed to allow the flavour to will be rinsed through. This cleans and develop and be retained. The aroma of pre-heats the pipework in preparation espresso does not react well to cold. -
Page 20: Adjusting The Height Of The Central Spout
Making drinks Adjusting the height of the central spout The height of the central spout can be adjusted to suit the height of the cup so that the drink will not cool down as quickly as it would if the spout were further away from the cup. -
Page 21: Double Portion
Making drinks Making espresso and coffee Double portion using ready ground coffee If you want to dispense a double portion of coffee or espresso or to Adding ready ground coffee dispense two portions at the same time: If you want to make espresso or coffee ^ touch the OK sensor a second time using ready ground coffee, you can whilst "2 portions?"... -
Page 22: To Make A Drink
Making drinks Drinks with milk If you not added any ground coffee, you must select "No". Otherwise the machine will Stainless steel milk flask assume that there is ground coffee in If using animal milk, only use only the chute, and only water will be pasteurised milk to avoid a build-up dispensed the next time coffee is made! -
Page 23: Cappuccino, Latte Macchiato, Hot Milk, Milk Froth
Making drinks To make drinks with milk, Cappuccino, latte macchiato, hot milk, milk froth ^ Place a suitable cup or glass under both jets. For best results with latte macchiato, the glass should be placed beneath the jets such that the espresso flows into the centre of the milk froth. -
Page 24: User Profile Drinks
Making drinks User profile drinks After use The User profile function is used to If you have made a drink with milk, the select the quantity of water and milk for following message appears in the your drink, as well as the fineness of the display after two minutes: ground, temperature and pre-brewing Start the rinsing... -
Page 25: Setting The Coffee Grinder
Setting the coffee grinder A good espresso or coffee with a thick, The crema is evenly coloured but even crema depends not only on the pale quality, pressure and temperature of The beans have been ground too the water and the quality of the coffee coarsely. -
Page 26: Settings: Customising Your Machine
Settings: Customising your machine It is easy to customise your machine to Timer: You can set or activate the suit your exact requirements. Timer. The following options are available in the "Set" menu: Settings menu – Switch on at: The machine can be set to switch on at a specific time of To select the various programme day. -
Page 27: Selecting The Language
Settings menu and follow the flag symbol. Volume: Buzzer tones, Keypad tone ^ Select "Settings F" from the Main Plate warmer (CVA 5060 only): Auto- menu, and then touch the OK sensor. matic, On, Off Settings Showroom prog.: Demo programme,... -
Page 28: Setting The Time Of Day
Settings: Customising your machine Setting the time of day Clock format ^ Select "Settings F" from the Main ^ Use the arrow sensors to select menu, and then touch the OK sensor. "Clock format". ^ Use the right arrow to select a 24 h or Settings 12 h clock. -
Page 29: Setting The Timer
Settings: Customising your machine Setting the timer If Automatic rinsing is set to "On", the ^ Select "Settings F" from the Main machine will automatically carry out menu, and then touch the OK sensor. a brief rinse when it switches itself Settings If the System lock is activated, the Timer... - Page 30 Settings: Customising your machine ^ First set the hour with one of the Activate arrow sensors. Touch the OK sensor. ^ Select "Activate" with the arrow ^ Then use the arrow sensors to set the sensors and touch the OK sensor. minutes.
-
Page 31: Coffee Jug (Making Several Cups One After The Other)
Settings: Customising your machine Coffee jug (making several Setting the amount of coffee cups one after the other) Both the flavour and the crema on the coffee depend on the quantity of This function can be used to make up ground coffee used. -
Page 32: Setting Pre-Brewing
Settings: Customising your machine ^ Use the arrow sensor to select the ^ Use the arrow sensors to highlight drink that you wish to set the amount the Pre-brewing option. of coffee for and then touch the OK ^ Touch the OK sensor to save the sensor. -
Page 33: Setting Automatic Rinsing
Settings: Customising your machine Setting Eco mode ^ Use the arrow sensors to highlight the temperature option. Eco mode is an energy saving mode in ^ Touch the OK sensor to save the which the steam system for preparing setting. hot milk or milk froth has to heat up. -
Page 34: Lighting: Setting The Brightness
Settings: Customising your machine Lighting: Setting the ^ Touch the OK sensor whilst the machine is off. brightness ^ Select "Lighting" and touch the OK You can set how bright the lighting sensor. should be on the machine: ^ Select "Switch off after" and touch the ^ Select "Settings F"... -
Page 35: Info (Showing The Number Of Drinks)
Settings: Customising your machine Info (showing the number of Safety (activating the System drinks) lock) The "Info" option enables you to check The machine can be locked to ensure how many drinks the machine has that it is not operated by unsupervised already dispensed or how many you children or persons who are can still dispense before it has to be... -
Page 36: To Override The System Lock
Settings: Customising your machine To override the System lock ^ Touch the OK sensor for about 3 seconds. The machine is now temporarily unlocked and can be used to make drinks again. It locks itself as soon as the machine is switched off. Setting the water hardness ^ Dip the strip in your drinking water for For trouble-free operation of the coffee... -
Page 37: Setting The Display
Settings: Customising your machine Setting the display If the water is harder than 40°dH/7.0 You can adjust both the contrast and mmol/l, limescale will build up more the brightness of the display: rapidy than with soft water. ^ Select "Settings F" from the Main Descaling will need to be carried out more regularly than stated to menu, and then touch the OK sensor. -
Page 38: Setting The Volume (Keypad Tone, Buzzer)
(CVA 5060 only) You can choose for a tone to sound You can connect a Miele EGW 4000-14, each time a sensor is touched. The -29 or an EGW 5000-14 to the coffee volume of the tone can also be... -
Page 39: Showroom Programme
Settings: Customising your machine Showroom programme You can switch the plate warmer on This function enables the machine to be and off manually whenever you want, illuminated in a showroom situtation independently of the coffee machine. without the heaters working. Resetting the factory default settings The plate warmer will not switch on... -
Page 40: Miele|Home
– Automatic rinsing and Eco mode (both set to "On") Miele|home – Plate warmer and Showroom prog. With Miele@home, the coffee machine (both set to "Off") becomes communication-enabled and can be operated via a pc or mobile – Time of day display (On for 60 phone. -
Page 41: Programming The Amount: Setting The Portion Sizes
Programming the amount: setting the portion sizes Programming the amount of The flavour of the coffee produced depends on the type of coffee, how espresso, coffee, hot milk and finely the beans are ground and the milk froth via the OK sensor quantity of water used. -
Page 42: Programming The Proportions For Cappuccino Or Latte Macchiato
Programming the amount: setting the portion sizes Programming the proportions ^ Once sufficient has flowed into the cup or glass and "Save" shows in the for cappuccino or latte display, touch the OK sensor to save macchiato via the OK sensor the amount. -
Page 43: Programming The Amount For Hot Water Via The Hot Water Sensor
Programming the amount: setting the portion sizes Programming the amount for Programming the amount via hot water via the Hot water "Settings" sensor ^ Select "Settings F" from the Main menu, and then touch the OK sensor. ^ Place the appropriate cup for the amount you want to programme Settings under the hot water spout. -
Page 44: Setting Up User Profiles
Setting up User profiles To cater for different tastes and The following options only appear if you preferences, you can enter up to 9 have already entered a new User individual User profiles. For each User profile in addition to the Standard User profile, you can select the following profile: individual settings:... -
Page 45: Creating A User Profile
Setting up User profiles Creating a User profile Saving an entry ^ Use the arrow sensors to highlight ^ When you have finished making your "Create", and then touch the OK entry, use the arrow sensors to sensor. highlight the word "OK" and then touch the OK sensor. -
Page 46: Deleting A User Profile
Setting up User profiles Deleting a User profile After each use If you want to delete the User profile The machine will automatically revert to completely, the Standard User profile each time a drink is dispensed. ^ Select "Delete User profile" using the ^ Select "After each use"... -
Page 47: Cleaning And Care
Cleaning and care Quick guide Clean the coffee machine every day to prevent a build-up of bacteria. Recommended frequency What do I have to do? Each time milk is used to make a Rinse milk pipework drink, if more than one hour has passed since the last drink was made Rinse the system (pipework) - Page 48 Cleaning and care Always allow the machine to cool All surfaces are susceptible to down before cleaning. Please be scratching. Scratches on glass aware that the water in the drip tray surfaces could even cause a will be hot. breakage. Danger of scalding.
-
Page 49: Rinse The System
Cleaning and care Rinse the system Milk pipework Before switching the machine off for All parts of the milk system need to any length of time, the pipework, brew be cleaned thoroughly and system and central spout need to be regularly. -
Page 50: Clean Milk Pipework
You clogged up it should be cleaned at the can then switch the machine off. end of each day using the Miele cleaning agent for milk pipework supplied. This cleaning agent has been specially... -
Page 51: Clean Milk Pipework Of Any Blockages
Cleaning and care Clean milk pipework of any blockages If you are getting steam instead of milk from the central spout the milk pipework in the machine is probably blocked up. If the milk pipework in the lid is clogged, ^ use the cleaning brush to clean it ^ Take the cover off together with the under running water. - Page 52 Cleaning and care ^ Take hold of the second holder by pin (c) and pull it upwards and off. The hoses can now be cleaned with a brush under running water. ^ Now push the milk pipes into the guides (a) and push the spout holder (b) back on.
-
Page 53: Stainless Steel Milk Flask With Lid
Cleaning and care Stainless steel milk flask with The stainless steel milk flask with lid must be washed by hand using hot water. It is important to keep the top of the flask and the seals clean (whilst filling it and carrying it). -
Page 54: Central Spout
Cleaning and care Central spout ^ Remove the two rubber stoppers (a) and manually clean these and ^ Pull the central spout down as far as the jets thoroughly. If required, it will go (a), and pull the cover to remove the air intake tube (b). -
Page 55: Water Container
Cleaning and care Water container Waste container Empty the water container daily and fill After a certain period of time a reminder with fresh, cold tap water just before to empty the waste container will use. appear in the display. The waste container must be cleaned when this When cleaning, make sure that there message appears. -
Page 56: Drip Tray
Cleaning and care Drip tray There is a sensor in the drip tray which causes a message to appear in the display when the drip tray is full and needs to be emptied. Remove the tray and empty and clean it when this message appears. -
Page 57: Coffee Bean Container
Cleaning and care Coffee bean container Interior and machine door ^ First take out all removable parts and The coffee bean container must be then clean the interior and the cleaned by hand with hot water and machine door with a mild solution of a little washing-up liquid. -
Page 58: Brew Unit
Cleaning and care Brew unit Leave the handle in the same The brew unit must be cleaned once position, otherwise the brew unit will a week by hand and without using be out of alignment and you will not cleaning agent, because the be able to push it back into the moving parts are lubricated and the coffee machine. -
Page 59: Degreasing The Brew Unit
Miele or via the internet at continue. www.miele-shop.com. To remind you to degrease the brew unit, the message "Please run the... -
Page 60: Machine Front
Remove any soiling immediately. ^ Switch the machine off with the On/Off sensor. ^ Clean the front using a damp Miele microfibre E-cloth or with a clean ^ remove the coffee chute cover and sponge and a solution of hot water and washing-up liquid. -
Page 61: Descaling The Machine
Miele or via the internet at No. of portions until descaling: 50. www.miele-shop.com. The remaining number of drinks that... -
Page 62: To Run The Descaling Programme
Descaling the machine To run the descaling To dissolve the descaling tablets programme ^ take the water container out and fill it to the k mark with lukewarm water. (Do not use less water than this Maintenance because this would cause the descaling programme to finish before ^ Touch the right arrow sensor until it has been completed properly). -
Page 63: Problem Solving Guide
... the machine does not light up after automatically within 20 seconds to it has been switched on. avoid damage. Call the Miele Service Department. Has the lighting been switched off? ^ Is it plugged in and switched on at ^ If it has, switch it back on (see "Settings: customising your machine -... - Page 64 Problem solving guide ... the lighting suddenly switches ... only a little or no coffee or itself off. espresso is dispensed from the central spout. If the machine has not been used for 15 minutes the lighting will switch itself off Is the central spout connector cap automatically.
- Page 65 ^ If the bean container is not empty finest setting, or if the amount of call the Miele Service Department. If coffee to be ground has been set at it is empty fill the container with fresh the largest amount.
- Page 66 ... coffee preparation has been ^ If this fault message continues to interrupted. appear, please call the Miele Service If the water container empties whilst a Department. drink is being prepared, a message will ... the machine does not rinse...
- Page 67 Problem solving guide ^ If the cap is faulty, replace it with the ... water or milk stops flowing whilst spare part supplied. programming in the amount to dispense..the descaling programme was The flow stops automatically when the started by mistake.
- Page 68 If neither is the case too coarse or too fine, and adjust and the fault message still appears in accordingly (see "Setting the coffee the display, call the Miele Service grinder"). Department. ^ Check the temperatures the different types of coffee have been set to.
- Page 69 If the fault message appears in the water container in the machine. display again, contact the Miele Service ^ Close the door. Department. The brew unit motor will now move into the correct position.
- Page 70 Problem solving guide ... the message "Check the brew unit" appears in the display. The brew unit may be dirty. ^ Follow the instructions in the display. ^ Clean the brew unit (see "Cleaning and care - Brew unit"). ^ Set a medium grinder setting and a medium amount of coffee (see "Setting the coffee grinder"...
-
Page 71: After Sales / Guarantee
In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer – Miele (see back cover for contact details). Please note that telephone calls may be monitored and recorded for training purposes (UK only). -
Page 72: Saving Energy
Saving energy AItering the following settings from the factory default, will increase the energy consumption of the coffee machine: – Eco mode – Lighting – Time of day display – Timer – Connection of a plate warmer When altering these settings, the message "This setting increases energy consumption"... -
Page 73: Electrical Connection U.k., Za, Irl
Electrical connection U.K., ZA, IRL All electrical work should be carried out Non-rewireable plugs BS 1363 by a suitably qualified and competent The fuse cover must be refitted when person only, in strict accordance with changing the fuse, and if the fuse cover current national and local safety is lost, the plug must not be used until a regulations (BS 7671 in the UK). -
Page 74: Installation
CVA 5060 coffee machine using a special connection cable (available as an optional accessory from your Miele Dealer or the Miele Spare Parts Department) so that it can be in use or ready for use whenever the CVA 5060 coffee machine is being used. This ensures that you always have pre-warmed cups ready for use. -
Page 75: Ventilation
^ If the housing unit niche is not fitted and damage the machine or the with a sealing strip you should fit a housing unit. Miele sealing strip to the machine before installing it. This is fitted from Installation the back of the machine. -
Page 76: Adjusting The Door Hinges
Installation If it is not: Adjusting the door hinges ^ realign the machine by adjusting the If the machine door becomes difficult to four feet. open or close after installation you can adjust the hinges to realign it: The feet can be unscrewed by up to approx. - Page 80 Alteration rights reserved / 4112 M.-Nr. 09 248 830 / 01 CVA 5060, CVA 5068...