Table of Contents
Advertisement
EMS 2487
• When you unpack the oven, check
that the product is free from damage.
Damage or any missing parts must be
reported immediately to the retailer.
The oven, parts of the oven or the
accessories may be wrapped by a pro-
tection foil. If so, you must remove this
foil before using the oven. Do not leave
packing material so that small children
can play with it. This can be hazardous.
• Do not use your appliance immediately
(wait approx. 1-2 hours) after transfer
from a cold place to a warm place as
condensation may cause a malfunction.
• This oven can be used as a free stan-
ding oven or built-in using a kit avail-
able from your retailer. To install the
oven in a kitchen cabinet follow the
instructions supplied with the building-in
kit. The oven should be in-stalled on a
flat, level surface at least 85 cm above
floor level. The surface must be strong
enough to safely bear the weight (22 kg)
of the oven, and the contents. To avoid
the possibility of causing vibration or
noise, the oven must be in a stable posi-
tion.
• Be sure to install the oven away from
heat and water sources.
• Do not block air vents on the top and
the sides of the cabinet nor place any
articles on the top of the oven. A gap all
around the oven is necessary : 14 cm
above the oven and any objects, 5 cm
on
the
sides and
10
cm
b e h i n d
the oven.
5 cm
If air vents
are blocked during operation, the oven
may overheat, and this may lead to
malfunctioning.
• This oven does conform to EEC
Installation
14 cm
5 cm
requirements of radio interference sup-
pression, but some interference may
occur if it is placed too close to a radio
or TV, so keep them as far apart as
possible.
Built-in model
• To install the appliance in a kitchen
cabinet, use the appropriate mounting
frame, kit number EBR/BF 246. Note
the relevant information for installation
and connection supplied whith the kit.
8
- Quick Links:
- Installation
- Built-In Model
- Technical Data
Hide quick links:
Advertisement
Table of Contents
