hit counter script
Fujitsu LifeBook E8420 User Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Laptop
  5. E8420 - LifeBook - Core 2 Duo 2.26 GHz
  6. User manual

Fujitsu LifeBook E8420 User Manual

Fujitsu notebook user's guide
Hide thumbs Also See for LifeBook E8420:
Table of Contents

Advertisement

Quick Links

User's Guide
Learn how to use your
Fujitsu LifeBook
E8420 notebook

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu LifeBook E8420

Summary of Contents for Fujitsu LifeBook E8420

  • Page 1 User’s Guide Learn how to use your Fujitsu LifeBook E8420 notebook...
  • Page 2 Copyright and Trademark Information Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document.
  • Page 3 © Copyright 2008 Fujitsu Computer Systems Corporation. All rights reserved. No part of this publication may be copied, reproduced, or translated, without prior written consent of Fujitsu. No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu.
  • Page 4 This unit requires an AC adapter to operate. Use only UL Listed I.T.E. Class II Adapters with an output rating of 19 VDC. The current rating is determined by the graphics card used in the system, and is indicated on the Fujitsu label on the bottom of the system.

  • Page 5: Recycling Your Battery

    * To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site at www.shopfujitsu.com in the US or www.fujitsu.ca/products/notebooks in Canada. ** RBRC is an independent third party to which Fujitsu provides funding for battery recycling; RBRC is in no way affiliated with Fujitsu.

  • Page 6: Table Of Contents

    Fujitsu Contact Information ........10...
  • Page 7 Hard Drive/Optical Drive Access Indicator ..... . . 26 PC Card Access Indicator ........27 NumLk Indicator .
  • Page 8 Fujitsu Driver Update Utility ........59...
  • Page 9 Lithium ion Battery..........65 Recharging the Batteries.
  • Page 10 Modem (RJ-11) Telephone Jack....... . . 88 Internal LAN (RJ-45) Jack ........89 Parallel Port .
  • Page 11 Caring for your LifeBook Notebook ......120 Cleaning your LifeBook notebook ....... 122 Cleaning the dust filter .
  • Page 12 Glossary ........... . . 141 Regulatory Information .
  • Page 13 Introducing the Optional Fingerprint Sensor Device ....175 Getting Started ..........176 Installing OmniPass .

  • Page 14: Preface

    Pages with additional information about a specific topic are cross-referenced within the text. For example: (“See Installation Procedure on page 43”.) On screen menu items appear in bold. Example: “Click Fujitsu Menu, and select your choice”. DOS commands you enter appear in Courier type. Example: “Shutdown the computer?”...

  • Page 15: Fujitsu Contact Information

    HE WARNING ICON HIGHLIGHTS INFORMATION THAT CAN BE HAZARDOUS TO EITHER YOU OOK NOTEBOOK Fujitsu Contact Information Service and Support You can contact Fujitsu Service and Support in the following ways: • Toll free: 1-800-8Fujitsu (1-800-838-5487) • E-mail: 8fujitsu@us.fujitsu.com • Website: http://www.computers.us.fujitsu.com/support...
  • Page 16 OU MUST HAVE AN ACTIVE INTERNET CONNECTION TO USE THE ONLINE Limited Warranty Your LifeBook notebook is backed by a Fujitsu International Limited Warranty. Check the service kit that came with your notebook for the Limited Warranty period and terms and conditions.

  • Page 17: Getting To Know Your Lifebook

    Getting to Know Your LifeBook Overview This section describes the components of your Fujitsu LifeBook E8420 notebook. We strongly recommend that you read it before using your notebook – even if you are already familiar with notebook computers. Figure 1. Fujitsu LifeBook E8420 notebook...

  • Page 18: Locating The Controls And Connectors

    Locating the Controls and Connectors Stereo Speaker Display Panel Optional Quick Point Cursor Control Status Indicator Panel LifeBook Security/ Application Panel Power/Suspend/ Resume Button Stereo Speaker Wireless Device On/Off Switch IrDA Sensor Keyboard Memory Stick/SD Card Slot Display Panel Latch Button Touchpad Pointing Device Figure 2.

  • Page 19: Top Components

    Top Components The following is a brief description of your LifeBook notebook’s top components. Display Panel The display panel is a color LCD panel with back lighting for the display of text and graphics. Status Indicator Panel The Status Indicator Panel displays symbols that correspond with a specific component of your LifeBook notebook.
  • Page 20 Display Panel Latch Button The display panel latch button is used to latch and unlatch the display. See “Opening the Display Panel” on page 49. Memory Stick/SD Card Slot The Memory Stick/SD card slot allows you to install a Memory Stick or a Secure Digital (SD) card for data storage.

  • Page 21: Left-Side Panel Components

    Microphone Jack Modem (RJ-11) Jack USB 2.0 Ports DC Power Jack Headphone Jack Figure 3. LifeBook notebook left-side panel Left-Side Panel Components The following is a brief description of your LifeBook notebook’s left-side components. Microphone Jack The microphone jack allows you to connect an external mono microphone. See “Microphone Jack” on page 93.
  • Page 22 MAXIMUM SPEED OF RATE DEPENDS ON THE LINE CONDITIONS ACCORDANCE WITH OR ADDITIONAL INFORMATION ABOUT THE MODEM FUJITSU COMPUTERS IEEE 1394 (4-pin) Jack The 4-pin 1394 jack is used to connect between your notebook and an IEEE 1394 peripheral such as a digital video camera.
  • Page 23 Smart Card Slot A dedicated Smart Card slot is provided on your notebook. Smart Cards are the same size and shape as credit cards, but they contain an integrated microprocessor chip. See “Smart Card Reader” on page 83. In order to use the embedded Smart Card Reader, you must purchase optional third-party software for installation.

  • Page 24: Right-Side Panel Components

    Anti-Theft Lock Slot Figure 4. LifeBook notebook right-side panel Right-Side Panel Components The following is a brief description of your LifeBook notebook’s right-side components. Anti-theft Lock Slot The anti-theft lock slot allows you to attach an optional physical lock down device. Flexible Bay The Flexible Bay can accommodate one of the following devices.

  • Page 25: Back Panel Components

    Anti-Theft Lock Slot Air Vents USB 2.0 Ports Parallel Port HDMI Jack Serial Port Gigabit LAN (RJ-45) Jack External Video Port Figure 5. LifeBook notebook back panel Back Panel Components Following is a brief description of your LifeBook notebook’s back panel components. Anti-theft Lock Slot The anti-theft lock slot allows you to attach an optional physical lock down device.
  • Page 26 The serial port allows you to connect serial RS-232 devices, such as serial printers or serial scanners. See “Serial Port” on page 90. Gigabit LAN (RJ-45) Jack The internal LAN (RJ-45) jack is used for an internal Gigabit (10Base-T/100Base-Tx/1000Base-T) Ethernet LAN connection. See “Internal LAN (RJ-45) Jack” on page 89. Air Vents The air vents allow air to circulate through the system to cool down the components.

  • Page 27: Bottom Components

    Dust Filter Figure 6. LifeBook notebook bottom panel Bottom Components The following is a brief description of your LifeBook notebook’s bottom panel components. Memory Upgrade Compartment Your notebook comes with high speed Double Data Rate 3 Synchronous Dynamic RAM (DDR3 SDRAM).
  • Page 28 The air vents allow air to circulate through the system to cool down the components. O PROTECT YOUR NOTEBOOK FROM DAMAGE AND TO OPTIMIZE SYSTEM PERFORMANCE KEEP ALL AIR ALL VENTS UNOBSTRUCTED PERIODIC CLEANING O NOT OPERATE THE NOTEBOOK IN AREAS WHERE THE AIR VENTS CAN BE OBSTRUCTED TIGHT ENCLOSURES OR ON SOFT SURFACES LIKE A BED OR CUSHION Lithium ion Battery Bay The battery bay contains the internal Lithium ion battery.

  • Page 29: Status Indicator Panel

    Identifier AC Adapter Status Indicator Panel The Status Indicator displays symbols that correspond to a specific component of your Fujitsu LifeBook notebook. These symbols tell you how each of those components are operating. Power Indicator The Power indicator symbol states whether your system is operational. It has several different states, each of which tells you the mode your notebook is in.

  • Page 30: Ac Adapter Indicator

    • Flashing: This means that your notebook is in Suspend mode. • Steady Off: This means that your notebook is either in Hibernate mode, or it has been turned off. AC Adapter Indicator The AC Adapter indicator shows whether your notebook is operating from the AC adapter, Auto/Airline adapter or battery(s).

  • Page 31: Battery Charging Indicators

    Battery Charging Indicators Located to the left of each Battery Level indicator is a small arrow symbol. This symbol states whether that specific battery is charging. This indicator will flash if the battery is too hot or cold to charge. ATTERIES SUBJECTED TO SHOCKS DAMAGED Wireless Radio Emission Indicator...

  • Page 32: Pc Card Access Indicator

    PC Card Access Indicator The PC Card Access indicator shows whether or not your notebook is accessing a PC Card. The indicator will flash if your software tries to access a PC Card even if there is no card installed. See “PC Cards/ExpressCards™”...

  • Page 33: Keyboard

    Start Key Using the Keyboard Your Fujitsu LifeBook notebook has an integral 84-key keyboard. The keys perform all the standard functions of a 101-key keyboard, including the Windows keys and other special function keys. This section describes the following keys.
  • Page 34 the right, left, up, or down within windows, applications and documents. • Function keys: The keys labeled [F1] through [F12], are used in conjunction with the [Fn] key to produce special actions that vary depending on what program is running. •...
  • Page 35 Your LifeBook notebook has 12 function keys, F1 through F12. The functions assigned to these keys differ for each application. You should refer to your software documentation to find out how these keys are used. • The [Fn] key provides extended functions for the notebook and is always used in conjunction with another key.

  • Page 36: Touchpad Pointing Device

    Figure 9. Touchpad pointing device The Touchpad pointing device comes built into your Fujitsu LifeBook notebook. It is used to control the movement of the pointer to select items on your display panel. The Touchpad is composed of a cursor control, two left and right buttons, and a scrolling button.

  • Page 37: Clicking

    • E8420 L ERTAIN MOVING THE CURSOR ON PAGE • HE SCROLLING BUTTON MAY BE REPLACED BY AN OPTIONAL FINGERPRINT SENSOR USING THE OPTIONAL FINGERPRINT SENSOR • N EXTERNAL MOUSE CAN BE CONNECTED TO EITHER THE NOTEBOOK OR THE OPTIONAL PORT REPLICATOR OWEVER IF YOU BOOT THE SYSTEM WITH AN EXTERNAL MOUSE CONNECTED THE DISABLED OR ENABLED DEPENDING ON THE SPECIFICATIONS IN YOUR...

  • Page 38: Double-Clicking

    Double-clicking means pushing and releasing the left button twice in rapid succession. This procedure does not function with the right button. To double-click, move the cursor to the item you wish to select, press the left button twice, and immediately release it. You can also perform the double-click operation by tapping lightly on the Touchpad twice.

  • Page 39: Scrolling

    Scrolling Using the Scrolling button allows you to navigate through a document quickly without using the window’s scroll bars. This is particularly useful when you are navigating through on-line pages. To use the Scrolling button, press the crescent shape at the top or bottom of the button to scroll up or down a page.

  • Page 40: Volume Control

    Volume Control Your Fujitsu LifeBook notebook has multiple volume controls which interact with each other. NY SOFTWARE THAT CONTAINS AUDIO FILES WILL ALSO CONTAIN A VOLUME CONTROL OF ITS OWN YOU INSTALL AN EXTERNAL AUDIO DEVICE THAT HAS AN INDEPENDENT VOLUME CONTROL...

  • Page 41: Flexible Bay Devices

    Flexible Bay Devices Your Fujitsu LifeBook notebook contains a Flexible Bay. The Flexible Bay can house an optical drive, a Lithium ion battery, a modular second hard disk drive and a weight saver. Your Flexible Bay will have one of the following devices installed.
  • Page 42 OU SHOULD NEVER LEAVE YOUR EMPTY DUST OR FOREIGN MATTER MAY ACCUMULATE INSIDE THE NOTEBOOK Cold-swapping To cold-swap modular devices in your Flexible Bay follow these easy steps: Close any open files. Shut down your LifeBook notebook. Pull out the Flexible Bay release latch. This will push your device out slightly, allowing you to remove it.

  • Page 43: Lifebook Security/Application Panel

    LifeBook Security/Application Panel A unique feature of your LifeBook notebook is the Security/Application Panel that allows you to secure your notebook from unauthorized use. The Security/Application Panel also allows you to launch applications with the touch of a button when your system is on. If the security system is activated, upon starting your notebook or resuming from suspend mode the security system requires you to enter a password code using the buttons on the Security/Application Panel.

  • Page 44: Setting Up Your Lifebook Security Panel

    Setting up Your LifeBook Security Panel When you receive your LifeBook notebook, the security panel application is pre-installed without any passwords. The following sections provide detailed information on your security panel, and how to set, change or remove passwords. Numbered Buttons Use these buttons to enter your password.
  • Page 45 Depending upon your operating system, use the appropriate procedure below. Go to the Start menu. Select All Programs. Select Accessories, then select Run. Type in: C:\Program Files\Fujitsu\Security Panel Application\Supervisor\FJSECS.EXE, then press [Enter] Follow the on-screen instructions to set the Supervisor password. Setting User Password Go to the Start menu.

  • Page 46: Operating Your Lifebook Security/Application Panel

    The security lock feature is in effect both when the system resumes from Off or suspend state. You will need to enter the user password right after pressing the Suspend/Resume button. Your system will not boot or resume from Sleep without entering your supervisor/user password. From Off State Turn on your system.

  • Page 47: Precautions

    Opening and Closing the Cover Closing the cover automatically places the notebook into suspend mode. Opening the cover does not automatically place the notebook into normal operation. Instead, you must enter the proper security password after pushing the Power/Suspend/Resume button. This setting can be changed in the Power Options Control Panel.
  • Page 48 EMOVING THE APPLICATIONS DOES NOT REMOVE THE PASSWORD CHANGE REMOVE PASSWORDS User: Go to Start Menu, Click on Control Panel. Open Add or Remove Programs (In Vista: Programs and Features) in the Control Panel. Select the Security Panel Application (In Vista: Security Panel) in the list, and click Add/Remove. When the Confirm File Deletion box appears, click Yes.

  • Page 49: Launching Applications With The Security/Application Panel

    You need to run FJSECS.exe first to set the supervisor password. Follow instructions under Setting Passwords on page 40. If you forget both passwords, contact Fujitsu Computer Systems Corporation Service and Support at 1- 800-8FUJITSU (1-800-838-5487). Fujitsu Computer Systems Corporation charges a service fee for unlocking a password restricted LifeBook notebook.
  • Page 50 HE TABS IN PPLICATION OOK NOTEBOOK To change an application associated with the Application buttons, click on the tab for the button you would like to reconfigure – for example, Application A. Click on [Browse] from Start Menu, scroll down the list of applications, click on the application you wish to launch with this button, and then click [OK].
  • Page 51 To deactivate the LifeBook Application Panel in Microsoft Windows XP systems, follow these easy steps. (Note that in Windows Vista systems, the application panel is automatically activated): Click on Start. Click on Programs. Click on LifeBook Application Panel. Click on Stop Application Panel. To reactivate, follow the same procedure, except for step 4.

  • Page 52: Getting Started With Your Lifebook

    Getting Started with Your LifeBook DC Power Jack AC Adapter Figure 12. Connecting the AC Adapter Power Sources Your Fujitsu LifeBook notebook has three possible power sources: a primary Lithium ion battery, an AC adapter or an optional Auto/Airline adapter.

  • Page 53: Connecting The Power Adapters

    The AC adapter or optional Auto/Airline adapter provides power for operating your notebook and charging the batteries. Connecting the AC Adapter Plug the DC output cable into the DC power jack of your LifeBook notebook. Plug the AC adapter into an AC electrical outlet. Connecting the Optional Auto/Airline Adapter Plug the DC output cable into the DC power jack on your notebook.

  • Page 54: Display Panel

    Display Panel Latch Display Panel Your Fujitsu LifeBook notebook contains a display panel that is backlit for easier viewing in bright environments and maintains top resolution through the use of active-matrix technology. Opening the Display Panel Press the Display Panel latch in. This releases the locking mechanism, allowing you to raise the display.

  • Page 55: Adjusting Display Panel Brightness

    Once you have turned on your LifeBook notebook, you may want to adjust the brightness level of the screen to a more comfortable viewing level. In Windows XP systems, the brightness can be adjusted using the keyboard. In Windows Vista systems, there are three ways to adjust the brightness, by using the keyboard, the Power Options, or the Windows Mobility Center.

  • Page 56: Closing The Display Panel

    ■ HEN USING HEN USING BATTERY POWER YOUR BRIGHTNESS SETTING IS SET TO APPROXIMATELY MID DEFAULT ■ HE HIGHER THE BRIGHTNESS LEVEL FASTER YOUR BATTERIES WILL DISCHARGE BRIGHTNESS IS SET AS LOW AS POSSIBLE Closing the Display Panel Holding the edge of your display panel, pull it forward until it is flush with the body of your LifeBook notebook. Push down until you hear a click.

  • Page 57: Starting Your Lifebook Notebook

    Starting Your LifeBook Notebook Power On Power/Suspend/Resume Button The Power/Suspend/Resume button is used to turn on your LifeBook notebook from its off state. Once you have connected your AC adapter or charged the internal battery, you can power on your notebook. HEN YOU TURN ON YOUR THAT AT LEAST ONE BATTERY IS INSTALLED AND CHARGED ADAPTER IS CONNECTED AND HAS POWER...

  • Page 58: Boot Sequence

    This information is in the BIOS program. Each time you power up or restart your notebook, it goes through a boot sequence which displays a Fujitsu logo until your operating system is found. During booting, your notebook is performing a standard boot sequence including a Power On Self Test (POST).
  • Page 59 Turn on or restart your LifeBook notebook. To enter the BIOS Setup Utility, press the [F2] key once the Fujitsu logo appears on the screen. This will open the main menu of the BIOS Setup Utility with the current settings displayed.

  • Page 60: Booting The System

    When you turn on your notebook for the first time, it will display a Fujitsu logo on the screen. If you do nothing the system will load the operating system, and then the Windows Welcome will begin.
  • Page 61 First of all, you will need to read and accept the End User License Agreements (EULAs). • F YOU REJECT THE TERMS OF THE LICENSE AGREEMENTS YOU WILL BE ASKED TO REVIEW THE LICENSE AGREEMENTS FOR INFORMATION ON RETURNING OOK NOTEBOOK •...

  • Page 62: Starting Windows Xp The First Time

    Registering Windows XP with Microsoft In order to ensure that you receive the most benefits from the Windows operating system, it should be registered the first time you use it. After you receive the Windows Welcome screen, you will be prompted to enter registration information in the following order.

  • Page 63: Registering Your Lifebook Notebook With Fujitsu

    Registering Your LifeBook notebook with Fujitsu You can register your LifeBook by going to our website at: us.fujitsu.com/computers You will need to be set up with an Internet Service Provider (ISP) to register online. ClickMe! Installing Click Me! EFORE INSTALLING THE...

  • Page 64: Fujitsu Driver Update Utility

    Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. For more information about the FDU utility, refer to “Automatically Downloading Driver Updates” on page 118.

  • Page 65: Power Management

    Power Management Your Fujitsu LifeBook notebook has many options and features for conserving battery power. Some of these features are automatic and need no user intervention, such as those for the internal modem. However, others depend on the parameters you set to best suit your operating conditions, such as those for the display brightness.

  • Page 66: Sleep Mode

    Sleep mode in Windows saves the contents of your system memory during periods of inactivity by maintaining power to critical parts. This mode turns off the CPU, display, hard drive, and all other internal components except those necessary to maintain system memory and for restarting. Your notebook can be put in Sleep mode by: •...

  • Page 67: Hibernate Feature

    The Hibernation feature saves the contents of your notebook’s system memory to the hard drive as a part of the Suspend/Resume mode. You can enable or disable this feature. Enable or Disable the Hibernation Feature Windows Vista: The default settings are not enabled. To enable or disable the Hibernation feature follow these steps: From the Start menu, select Control Panel.

  • Page 68: Powering Off

    Click the Start button, and then click Shut Down. Select the Restart option from within the Windows Shut Down dialog box. Click OK to restart your notebook. Your notebook will shut down and then reboot. URNING OFF YOUR NOTEBOOK WITHIN YOU START THE NEXT TIME Powering Off Before turning off the power, check that the hard drive/optical drive access indicator is off.
  • Page 69 • LWAYS POWER OFF THE COMPUTER BEFORE TRANSPORTING AND SHUTTING DOWN THE SYSTEM WAIT UNTIL THE STATUS THE INDICATOR PANEL IS BLANK • T IS POSSIBLE THAT THE UNIT MAY NOT AUTOMATICALLY GO TO POWER OFF OR HIBERNATE MODE WHEN YOU CLOSE THE LID HIS SITUATION MAY OCCUR DUE TO PRE SETTINGS OR SOME OTHER APPLICATION RUNNING ON THE COMPUTER •...

  • Page 70: User-Installable Features

    Chapter 3 User-Installable Features Lithium ion Battery Your LifeBook notebook has a Lithium ion battery that provides power for operating your notebook when no external power source is available. The battery is durable and long lasting, but should not be exposed to extreme temperatures, high voltages, chemicals or other hazards.

  • Page 71: Recharging The Batteries

    • CTUAL BATTERY LIFE WILL VARY BASED ON SCREEN BRIGHTNESS MANAGEMENT SETTINGS DRIVE ULTI ORMAT HAVE A SIGNIFICANT IMPACT ON BATTERY LIFE THE BATTERY AGES NEW ONE • NDER FEDERAL THEM IN THE TRASH PROPERLY HECK WITH YOUR LOCAL GOVERNMENT AUTHORITY FOR DETAILS REGARDING RECYCLING OR DISPOSING OF OLD BATTERIES CONTACT YOUR SUPPORT REPRESENTATIVE AT Recharging the Batteries...
  • Page 72 SING HEAVY CURRENT DEVICES SUCH AS THE MODEM OR FREQUENT ACCESSES MAY PREVENT CHARGING COMPLETELY Low Battery State When the battery is running low, a low battery notification message will appear. If you do not respond to the low battery message, the batteries will continue to discharge until they are too low to operate. When this happens, your notebook will go into Sleep mode.

  • Page 73: Replacing The Battery

    The Status Indicator panel uses a symbol inside the battery outline of the Battery Level indicator to display the operating level available in that battery. If this display shows a Shorted Battery, it means the battery is damaged and must be replaced so it does not damage other parts of your LifeBook notebook. Replacing the Battery With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not charged.
  • Page 74 Battery Bay Release Latches Battery Pack Figure 14. Removing a Battery Follow steps 3 through 6 in “Cold Swapping Batteries”. F THE ITHIUM ION BATTERY CONNECTOR IS NOT FULLY SEATED YOU MAY NOT BE ABLE TO USE YOUR NOTEBOOK OR CHARGE YOUR BATTERY 69 - Lithium ion Battery...

  • Page 75: Optical Drive

    Optical Drive There is a variety of media available to use with your system, depending upon the system configuration you have selected. Multi-Format DVD Writers, DVD/CD-RW Combo drives, and DVD-ROM drives are collectively known as “optical drives”. DVD-R and DVD-RW discs hold up to 4.7 GB of data (DVD-R discs used with Multi-Format Dual-Layer DVD writer hold up to 8.5 GB).

  • Page 76: Media Player Software

    NSTALL YOUR MEDIA PLAYER SOFTWARE BEFORE FIRST USING THE MEDIA DRIVES EFER TO THE APPLICABLE README FILE ON THE Media Player Software Dual-Layer Multi-Format DVD Writer model only: With the Dual-Layer Multi-Format DVD Writer and media player software you can play DVD movies and music CDs on your LifeBook notebook. The media player includes controls which allow you to take full advantage of the features of a DVD movie, as well as standard features such as fast forward, fast reverse, pause, etc.
  • Page 77 THAT YOU CAN ONLY CHANGE THE REGION CODE UP TO FOUR TH CHANGE THE LAST CODE ENTERED BECOMES PERMANENT NSERT OTIFICATION OMPUTER OR FROM WITHIN 72 - Optical Drive FUJITSU COMPUTERS FOR THE WHICH IFFERENT REGION ROPERTIES MENU OF THE AND CANNOT BE UNCTION...

  • Page 78: Removing Media

    Figure 16. Loading/Ejecting Media Removing Media Push and release the eject button on the front of the optical drive. This will stop the drive and the holder tray will come out of the LifeBook notebook a short distance. Gently pull the tray out until the disc can easily be removed from the tray. Carefully remove the media disc from the holder tray.

  • Page 79: Emergency Optical Drive Tray Release

    If for some reason the eject button fails, you can open the media tray with a paper clip or similar tool inserted into the eject hole in the right side of the front of the tray. Straighten one side of a paper clip and push it gently into the hole.

  • Page 80: Using Media Player On Battery Power

    With most DVD-ROMs, you have the option of altering how the movie should play and what you wish to view. You can do this by using the media player control panel and the mouse. Right-click on the movie screen to open a dropdown menu for options. Select View, then Player for all the controls available.
  • Page 81 ’ F YOU DON T HAVE AN ADDITIONAL BATTERY HTTP COMPUTERS FUJITSU OOK NOTEBOOK WILL SHUT DOWN IMPROPERLY MOVIES MAY NOT REQUIRE YOU TO SWAP BATTERIES OR ATTACH OWEVER IT IS BEST TO BE PREPARED SINCE ACTUAL BATTERY LIFE WHILE...

  • Page 82: Memory Stick/Secure Digital Cards

    SD Card Memory Stick Figure 18. Installing a Memory Stick or SD Card Memory Stick/Secure Digital Cards Your LifeBook notebook supports Memory Sticks and Secure Digital (SD) cards, on which you can store and transfer data to and from a variety of digital devices. These cards use flash memory architecture, which means they don’t need a power source to retain data.

  • Page 83: Installing Memory Stick/Sd Cards

    Memory Stick and SD Cards are installed in the Memory Stick/SD Card slot. To install an Memory Stick or SD Card, follow these steps NSTALLING OR REMOVING A SHUTDOWN OR BOOTUP PROCESS MAY DAMAGE THE CARD AND O NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS YOU MAY PERMANENTLY DAMAGE THE CARD See your specific card manual for instructions on the installation of your card.

  • Page 84: Pc Cards/Expresscards

    PC Cards/ExpressCards™ Your notebook supports Type I and Type II PC Cards and ExpressCards of functions depending on which type of card you install. You can install one or two cards at a time, depending on its type. PC Cards should be installed in the bottom slot, and ExpressCards in the top slot. Some available PC/ExpressCards: •...

  • Page 85: Installing Pc Cards

    PC Cards are installed in the PC Card slot (the lower of the two slots). To install a PC Card, follow these steps: • NSTALLING OR REMOVING A PROCESS MAY DAMAGE THE CARD AND • O NOT INSERT A CARD AS YOU MAY PERMANENTLY DAMAGE THE CARD OU MAY BE REQUIRED TO LOG ON AS AN ROUP TO COMPLETE THIS PROCEDURE POLICY SETTINGS MAY ALSO PREVENT YOU FROM COMPLETING THIS PROCEDURE...

  • Page 86: Installing Expresscards

    Unlock the card from the slot by pressing the eject button associated with the slot in which the card is located. When pressed, the button will pop out. Firmly press the button again until it is flush with the notebook. This will eject the card slightly out of the slot allowing you to remove the card.

  • Page 87: Removing Expresscards

    • NSTALLING OR REMOVING AN PROCESS MAY DAMAGE THE CARD AND • O NOT INSERT AN THE CARD AS YOU MAY PERMANENTLY DAMAGE THE CARD OU MAY BE REQUIRED TO LOG ON AS ROUP TO COMPLETE THIS PROCEDURE NETWORK POLICY SETTINGS MAY ALSO PREVENT YOU FROM COMPLETING THIS PROCEDURE See your ExpressCard manual for instructions on the installation of your card.

  • Page 88: Smart Card Reader

    Unlock the card from the slot by pressing the eject button associated with the slot in which the card is located. When pressed, the button will pop out. Firmly press the button again until it is flush with the notebook. This will eject the card slightly out of the slot allowing you to remove the card.

  • Page 89: Memory Upgrade Module

    (DDR3-1066 SDRAM) factory installed. To increase your notebook’s memory capacity, you may install an additional memory upgrade module. The memory upgrade must be a dual-in-line (DIMM) SDRAM module. To ensure 100% compatibility, purchase the SDRAM module only from the Fujitsu web store at www.shopfujitsu.com •...
  • Page 90 Align the memory upgrade module with the part side up. Align the connector edge of the memory upgrade module with the connector slot in the compartment. Note that the memory modules will be “stacked” when both are installed. Figure 22. Opening the Memory Compartment Insert the memory upgrade module at a 45°...

  • Page 91: Removing A Memory Upgrade Module

    Perform steps 1 through 4 of Installing a Memory Upgrade Module. Pull the clips sideways away from each side of the memory upgrade module at the same time. While holding the clips out, remove the module from the slot by lifting it up and pulling it away from your notebook.

  • Page 92: Checking The Memory Capacity

    Checking the Memory Capacity Once you have changed the system memory capacity by replacing the installed module with a larger one, be sure to check that your notebook has recognized the change. Windows XP: Check the memory capacity by clicking [Start] -> Settings -> Control Panel, then double- clicking the System icon.

  • Page 93: Modem (Rj-11) Telephone Jack

    Device Ports Your Fujitsu LifeBook notebook and the optional Port Replicator come equipped with multiple ports to which you can connect external devices including: disk drives, keyboards, modems, printers, etc. Modem (RJ-11) Telephone Jack The modem (RJ-11) telephone jack is used for an internal modem.

  • Page 94: Internal Lan (Rj-45) Jack

    Select the Modems tab, and click the [Properties] button. Select the Modem tab and adjust the volume as necessary. HE INTERNAL MODEM IS NOT INTENDED FOR USE WITH THE INTERNAL MODEM TO A MODEM OR YOUR ENTIRE DOCUMENTATION FOR DETAILS BEFORE YOU CONNECT YOUR MODEM •...

  • Page 95: Parallel Port

    The parallel port, or LPT port, located on the system and on the optional Port Replicator, allows you to connect parallel devices, such as a printer to your notebook. In order to connect a parallel interface device follow these easy steps: Align the connector with the port opening.
  • Page 96 The Universal Serial Bus 2.0 ports (USB) allow you to connect USB devices such as external game pads, pointing devices, keyboards and/or speakers. There are four USB 2.0 ports on your notebook: two on the left side and two on the rear. In order to connect a USB device follow these steps: Align the connector with the port opening.

  • Page 97: Infrared Port

    The Infrared IrDA (4Mbps) port allows for wireless data transfer between your notebook and other IrDA- compatible devices, such as another computer or a printer, without the use of a cable. The infrared port is located on the front of the system, adjacent to the wireless device switch It is important to keep in mind that while carrying out this form of communication, both devices must be placed so their infrared ports are directly facing each other without obstruction.

  • Page 98: Headphone Jack

    In order to connect a 1394 device, follow these steps: Align the connector with the port opening. Push the connector into the port until it is seated. Headphone Jack The headphone jack allows you to connect headphones or powered external speakers to your notebook. Your headphones or speakers must be equipped with a 1/8”...

  • Page 99: External Video Port

    EPENDING UPON YOUR SYSTEM CONFIGURATION DUAL PURPOSES CONFIGURATIONS THE JACK SERVES AS A STEREO MICROPHONE External Video Port The external video port allows you to connect an external monitor or LCD projector. In order to connect an external video device, follow these easy steps: Align the connector with the port opening.

  • Page 100: Troubleshooting

    Chapter 4 Troubleshooting Your LifeBook Troubleshooting There may be occasions when you encounter simple setup or operating problems that you can solve on the spot, or problems with peripheral devices that can be solved by replacing the device. The information in this section helps you isolate and resolve some of these straightforward issues and identify failures that require service.
  • Page 101 If you have tried the solutions suggested in the Troubleshooting Table without success, contact your support representative: Toll free: 1-800-8Fujitsu (1-800-838-5487) E-mail: 8fujitsu@us.fujitsu.com Web site: http://www.computers.us.fujitsu.com/support. Before you place the call, you should have the following information ready so that the customer support representative can provide you with the fastest possible solution: • Product name •...
  • Page 102 Using the Troubleshooting Table When you have problems with your LifeBook notebook, try to find the symptoms under the Problem column of the troubleshooting table for the feature giving you difficulty. You will find a description of common causes for that symptom under the column Possible Cause and what, if anything, you can do to correct the condition under Possible Solutions.

  • Page 103: Audio Problems

    Plugging in headphones disables the built-in speakers, remove the headphones. The Audio Driver may be installed or reinstalled by using the Driv- ers and Applications CD that came with your Fujitsu LifeBook. Refer to your application and operating system documentation for help.

  • Page 104: Port Replicator Problems

    Problem Possible Cause LifeBook notebook fails to Incorrect DVD Player or recognize DVD/CD-RW/CD- no DVD Player software ROM’s. is installed. Wrong drive designator (continued) was used for the disc in the application. DVD/CD-RW/CD-ROM is dirty or defective. The drive access indicator The Windows auto on the Status Indicator insertion function is...

  • Page 105: Hard Drive Problems

    Problem Possible Cause You cannot access your Disk is not loaded cor- optional external floppy disk. rectly. (continued) The drive may not be properly installed. Security is set to protect floppy disk data access. Hard Drive Problems You cannot access your The wrong drive desig- hard drive.

  • Page 106: Memory Problems

    Problem Possible Cause You have connected an Your operating system external keyboard or a software is not setup mouse and it seems to be with correct software locking up the system. driver for that device. Memory Problems Your Power On screen does Your memory upgrade not show the correct amount module is not properly...

  • Page 107: Power Failures

    Problem Possible Cause PC Card/ExpressCard Problems A card inserted in the PC The card is not properly Card or ExpressCard slot installed. does not work or is locking The card may have been up the system. installed while an appli- cation was running, so your notebook is not aware of its installation.
  • Page 108 Problem Possible Cause You turn on your LifeBook The power adapter (AC notebook and nothing or auto/airline) is not seems to happen. plugged in properly. (continued) AC adapter has no power from AC outlet, airplane seat jack, or car cigarette lighter. The Power adapter (AC or auto/airline) is faulty.

  • Page 109: Shutdown And Startup Problems

    Problem Possible Cause Your LifeBook notebook will The batteries are not work on battery alone. improperly installed. (continued) Your installed batteries are faulty. The batteries seem to You are running an discharge too quickly. application that uses a lot of power due to fre- quent drive access, use of a modem, LAN PC card, or wireless device.
  • Page 110 Problem Possible Cause The system powers up, and You have a secured sys- displays power on informa- tem requiring a pass- tion, but fails to load the word to load your OS. operating system. Internal hard drive was not detected. An error message is dis- Power On Self Test played on the screen during...
  • Page 111 Problem Possible Cause The built-in display is blank The notebook is set for when you turn on your Life- an external monitor only. Book notebook. (continued) The power manage- ment timeouts may be set for very short inter- vals and you failed to notice the display come on and go off again.
  • Page 112 Problem Possible Cause The display does not close. A foreign object (such as a paper clip) is stuck between the display and keyboard. The display has bright or If the spots are very tiny dark spots. and few in number, this is normal for a large LCD display.

  • Page 113: Power On Self Test Messages

    Power On Self Test Messages The following is an alphabetic list of error-and-status messages that Phoenix BIOS and/or your operating system can generate and an explanation of each message. Error messages are marked with an *. If an error message is displayed that is not in this list, write it down and check your operating system documentation both on screen and in the manual.
  • Page 114 to check for the hard drive type settings and correct them if necessary. If the settings are OK and the message appears when you restart the system, there may be a serious fault which might cause you to lose data if you continue. Contact your support representative. *Incorrect Drive A type –...
  • Page 115 *Operating system not found Operating system cannot be located on either drive A: or drive C: Enter the setup utility and see if both the fixed disk, and drive A: are properly identified and that the boot sequence is set correctly. Unless you have changed your installation greatly, the operating system should be on drive C:.
  • Page 116 nnnn Shadow RAM Passed Where nnnn is the amount of shadow RAM in kilobytes successfully tested. *System battery is dead – Replace and run SETUP The BIOS CMOS RAM memory hold up battery is dead. This is part of your BIOS and is a board mounted battery which requires a support representative to change.
  • Page 117 The operating system and application software that is factory installed detects the modem characteristics and provides the necessary command strings to operate the modem. The internal modem operation is controlled by generic AT commands from the operating system and application software. The standard long form result codes may, in some cases, be displayed on your screen to keep you informed of the actions of your modem.

  • Page 118: Restoring Your Pre-Installed Software

    ARE NOT ON THE THE THIRD To re-install drivers and/or applications: Boot up the system and insert the DAR CD after Windows has started. A Fujitsu Installer screen is displayed after the CD is inserted. After reading the License Agreement, click [I agree].

  • Page 119: Restoring The Operating System For Windows Vista Systems

    In the list, check off all the components you want to install. If you want to install all components, click [Select All]. Clicking [Select All] will select all of the blue-coded components; you must select grey and green components separately. Once you have selected the components you wish to install, click [Install Selected Subsystems];...
  • Page 120 You can also use the TrustedCore menu to determine whether the utility is pre-loaded by powering on your system then pressing the [Enter] key when the Fujitsu logo appears on the screen. The TrustedCore Menu will appear and the Recovery and Utility option will appear in the menu.
  • Page 121 To verify/change the boot-up priority (rather than booting-up from the hard drive or an external floppy disk drive), perform the following steps: Power on your system. When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left mouse or touchpad button; the TrustedCore Menu will appear.

  • Page 122: Restoring The Operating System For Windows Xp Systems

    To verify/change the boot-up priority (rather than booting-up from the hard drive or an external floppy disk drive), perform the following steps: Power on your system. When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left mouse or touchpad button; the TrustedCore Menu will appear.

  • Page 123: Automatically Downloading Driver Updates

    Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. The FDU icon should appear in the system tray at the bottom right of your screen (roll the cursor over the icons to find the correct one).
  • Page 124 Show update history Brings up a screen that displays a history of updates that have been made via the FDU. About Fujitsu Driver Update Displays the FDU version number and copyright information. Fujitsu Driver Update Readme Displays the FDU readme.

  • Page 125: Caring For Your Lifebook Notebook

    Chapter 5 Care and Maintenance Caring for your LifeBook Notebook If you use your Fujitsu LifeBook notebook carefully, you will increase its life and reliability. This section provides some tips for looking after the notebook and its devices. • •...
  • Page 126 If your notebook will not boot after it has dried out, call your support representative. • Do not use your Fujitsu LifeBook notebook in a wet environment (near a bathtub, swimming pool). • Always use the AC adapter and batteries that are approved for your notebook.
  • Page 127 • Always disconnect the power plug. (Pull the plug, not the cord.) • Clean your LifeBook notebook with a damp, lint-free cloth. Do not use abrasives or solvents. • Use a soft cloth to remove dust from the screen. Never use glass cleaners. •...

  • Page 128: Cleaning The Dust Filter

    Disinfecting LifeBook computers • Wipe the surface with a soft cloth wipe and a 50% ethanol solution or use another ethanol-based germicide which has been registered as a hospital disinfectant by the EPA. • SE OF INCORRECT CLEANERS CAN RESULT IN OPTICAL IMPAIRMENT OF THE THE COMPUTER LWAYS REFER TO THE CLEANER MANUFACTURER SAFETY DATA SHEETS FOR PROPER HANDLING AND USE OF THE PRODUCTS...

  • Page 129: Storing Your Lifebook Notebook

    Figure 33. Removing/installing the dust filter Put back the dust filter by inserting the end without latch first (positioning the keyinside first), and pushing in the filter until it latches. LWAYS BE SURE THE DUST FILTER IS INSTALLED WHEN RUNNING YOUR SYSTEM FILTER COULD CAUSE CONTAMINATION AND POSSIBLE DAMAGE TO THE SYSTEM Storing your LifeBook notebook •...

  • Page 130: Traveling With Your Lifebook Notebook

    (-25ºC) and 140ºF (60ºC). Traveling with your LifeBook notebook • Do not transport your notebook while it is turned on. • It is recommended that you carry your notebook with you while traveling, rather than checking it in as baggage. •...

  • Page 131: Batteries

    Caring for your Batteries • Always handle batteries carefully. • Do not short-circuit the battery terminals (that is, do not touch both terminals with a metal object). Do not carry loose batteries in a pocket or purse where they may mix with coins, keys, or other metal objects.
  • Page 132 Caring for your Media (DVD/CD/CD-R) Media discs are precision devices and will function reliably if given reasonable care. • Always store your media disc in its case when it is not in use. • Always handle discs by the edges and avoid touching the surface. •...
  • Page 133 • Use of a commercially available lens cleaner is recommended for regular maintenance of your drive. Caring for your Cards PC Cards and ExpressCards are durable, but you must treat them with care. The documentation supplied with your card will provide specific information, but you should pay attention to the following points: •...

  • Page 134: Specifications

    Chapter 6 System Specifications Specifications This section provides the hardware and environmental specifications for your Fujitsu LifeBook notebook. Specifications of particular configurations will vary. Configuration Label The configuration label located on the bottom of your notebook contains specific information regarding the options you’ve chosen for your notebook.

  • Page 135: Chipset

    Intel® Core™ 2 Duo processors (Refer to the system label to determine the speed of your processor). Chipset • Intel GM45 or Intel PM45 (depending upon system configuration) • I/O Controller Hub 9 Mobile (ICH9M-E) Memory System Memory • DDR3-1066 MHz SDRAM dual-channel memory module. •...

  • Page 136: Audio

    • Internal: 1680 x 1050 pixel resolution, 16M colors • External: 1600 x 1200 pixel resolution, 16M colors • Simultaneous: 1600 x 1200, 16M colors Video RAM • Intel® Graphics Media Accelerator X4500 video graphics. Up to 384 MB shared video memory using Dynamic Video Memory Technology (DVMT), or, •...

  • Page 137: Features

    Depending upon the configuration of your system, one of the following may be installed. • Modular Combo DVD/CD-RW Drive: 24x CD-ROM, 24x CD-R, 10x CD-RW, 8x DVD-ROM • Modular Dual-Layer Multi-Format DVD Writer: 24x CD-ROM, 24x CD-R, 10x CD-RW, 8x DVD- ROM, 5x DVD-RAM, 8x DVD-R, 4x DVD-R (DL), 6x DVD-RW •...

  • Page 138: Device Ports

    The LifeBook E8420 has a Trusted Platform Module (TPM) installed for added system security. LifeBook Security/Application Panel Button Label Button Function Application A Application B Internet E-Mail Figure 34. Application Launcher Defaults Theft Prevention Lock Two lock slots for use with security restraint systems.
  • Page 139 • Infrared port (IrDA1.1, 4 Mbps max.) • One modular modem (RJ-11) connector • One LAN (RJ-45) connector • Docking port (100-pin, to dock with port replicator) • One stereo headphone jack or one stereo headphone/line-out jack, depending upon system configuration.

  • Page 140: Power

    Built-in keyboard with all functions of 101 key PS/2 compatible keyboards. • Total number of keys: 84 • Function keys: F1 through F12 • Feature extension key: Fn • Two Windows keys: one Start key, one application key • Key pitch: 19 mm •...

  • Page 141: Dimensions And Weight

    Operating: 20% to 85%, relative, non-condensing Non-operating; 8% to 85%, relative, non-condensing Altitude Operating: 10,000 feet (3,048 m) maximum Popular Accessories For ordering or additional information on Fujitsu accessories please visit our Web site at www.shopfujitsu.com or call 1-800-FUJITSU. 136 - System Specifications...

  • Page 142: Pre-Installed Software

    • Google Desktop • Google Tool Bar • Google Picasa • ArcSoft Webcam Companion • OmniPass Fingerprint application • Fujitsu Driver Update utility • Fujitsu Portshutter • Microsoft Office Ready with Office Assistant Learning About Your Software Tutorials All operating systems and most application software have tutorials built into them upon installation. We highly recommend that you step through the tutorial before you use an application.
  • Page 143 Adobe Acrobat Reader The Adobe Acrobat Reader allows you to view, navigate, and print PDF files from across all of the major computing platforms. Norton Internet Security Your system is preinstalled with a free 90-day trial version of Symantec’s Norton Internet Security™. Norton Internet Security is a suite of tools designed to protect your LifeBook notebook from computer viruses, hackers, spyware, and spam.
  • Page 144 Fujitsu Driver Update Utility The Fujitsu Driver Update (FDU) utility is pre-installed on your system. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. See “Automatically Downloading Driver Updates”...
  • Page 145 Office Professional 2007. All you need to do is purchase the appropriate Office 2007 license kit which allows you to "un-lock" the full version of Office that you want. ® Fujitsu offers a Media License Kit for Microsoft Office Small Business 2007. Simply enter your product ®...

  • Page 146: Glossary

    Glossary AC Adapter A device which converts the AC voltage from a wall outlet to the DC voltage needed to power your LifeBook notebook. Access point Wireless network device used to bridge wireless and wired network traffic. ACPI Advanced Configuration and Power Interface Active-Matrix Display A type of technology for making flat-panel displays which has a transistor or similar device for every pixel on the screen.
  • Page 147 Accelerated Graphics Port. Graphics port specifically designed for graphics-intensive devices, such as video cards and 3D accelerators. Auto/Airline Adapter A device which converts the DC voltage from an automobile cigarette lighter or aircraft DC power outlet to the DC voltage needed to power your LifeBook notebook. BIOS Basic Input-Output System.
  • Page 148 CardBus A faster, 32-bit version of the PC Card interface which offers performance similar to the 32-bit PCI architecture. Channel Range of narrow-band frequencies used by the WLAN device to transmit data. IEEE802.11b/g - 11 channels, 22 MHz wide channels. COM Port Abbreviation for communication port.
  • Page 149 DIMM Dual-in-line memory module. Disk Drive The hardware which spins the disk and has the heads and control circuitry for reading and writing the data on the disk. Direct Memory Access. Special circuitry for memory to memory transfers of data which do not require CPU action.
  • Page 150 Encryption Key (Network Key) Data encryption key used to encrypt message text and for computing message integrity checks. Data encryption protects data from unauthorized viewing. This device uses the same encryption key to encode and decode the data, and the identical encryption key is required between the sender and receiver.
  • Page 151 IEEE802.11a Wireless LAN standard that supports a maximum data rate of 54 Mbps. 802.11a devices operate in the 5 GHz lower and middle UNII bands. IEEE802.11b Wireless LAN standard that supports a maximum data rate of 11 Mbps. 802.11b devices operate in the 2.4 GHz ISM band.
  • Page 152 Class B - supports 65,000 hosts on each of 16,000 networks Class C - supports 254 hosts on each of 2 million networks The number of unassigned Internet addresses is running out, so a new classless scheme called CIDR is gradually replacing the system based on classes A, B, and C and is tied to adoption of IPv6.
  • Page 153 MAC Address Media Access Control Address. A unique physical address of a network card. For Ethernet, the first three bytes are used as the vendor code, controlled and assigned by IEEE. The remaining three bytes are controlled by each vendor (preventing overlap), therefore, every Ethernet card is given a unique physical address in the world, being assigned with a different address from other cards.

  • Page 154: Microprocessor

    Network key Data that is used for encrypting data in data communication. The personal computer uses the same network key both for data encryption and decryption, therefore, it is necessary to set the same network key as the other side of communication. Network name (SSID: Service Set Identifier When a wireless LAN network is configured, grouping is performed to avoid interference or data theft.
  • Page 155 Pitch (keyboard) The distance between the centers of the letter keys of a keyboard. Pixel The smallest element of a display, a dot of color on your display screen. The more pixels per area the clearer your image will appear. POST Power On Self Test.
  • Page 156 RAM Module A printed circuit card with memory and associated circuitry which allows the user to add additional memory to the computer without special tools. Reset The act of reloading the operating system. A reset erases all information stored in RAM. Restart See Reset.
  • Page 157 Sleep To make inoperative for a period of time. Your LifeBook notebook uses various suspension states to reduce power consumption and prolong the charge of your battery. SSID Service Set Identifier, a 32-character unique identifier attached to the header of packets sent over a WLAN that acts as a password when a mobile device tries to connect to the BSS.
  • Page 158 Thin Film Transistor – A technology for flat display panels which uses a thin film matrix of transistors to control each pixel of the display screen individually. Underwriters Laboratories – An independent organization that tests and certifies the electrical safety of devices.

  • Page 159: Regulatory Information

    Regulatory Information Notice Changes or modifications not expressly approved by Fujitsu could void this user’s authority to operate the equipment. FCC NOTICES Notice to Users of Radios and Television This equipment has been tested and found to comply with the limit for class B digital devices, pursuant to parts 15 of the FCC Rules.
  • Page 160 If trouble is experienced with this equipment, for repair or warranty information, please refer to the manual or contact Fujitsu Computer Systems Corporation, Customer Service. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
  • Page 161 The equipment cannot be used on public coin service provided by the telephone company. Connection to party line service is subject to state tariffs. (Contact the state public utility commission, public service commission or corporation commission for information). If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this computer does not disable your alarm equipment.
  • Page 162 Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecommunication company cause to request the user to disconnect the equipment from the telephone line. NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is 0.1B. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.
  • Page 163 Canada. Toute réparation ou modification, qui n’est pas expressément approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique. AVIS: L’indice d’équivalence de la sonnerie (IES) du présent matériel est de 0.1B. L’IES assigné à chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent être raccordés à...

  • Page 164: Fcc Regulatory Information

    Appendix A: WLAN User’s Guide FCC Regulatory Information Please note the following regulatory information related to the optional wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones.
  • Page 165 interference caused by such unauthorized modification, substitution or attachment. The manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines. This device must not be co-located or operated in conjunction with any other antenna or transmitter. For IEEE 802.11a Wireless LAN: For operation within 5.15~5.25 GHz frequency range, it is restricted to indoor environments, and the antenna of this device must be integral.
  • Page 166 003 B / NMB 003 B. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorized by Fujitsu Computer Systems Corporation may invalidate the user's right to operate this equipment.

  • Page 167: Before Using The Optional Wireless Lan

    Before Using the Optional Wireless LAN This manual describes the procedures required to properly set up and configure the optional integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure it's correct operation. Keep this manual in a safe place for future reference.

  • Page 168: Wireless Lan Modes Using This Device

    Wireless LAN Modes Using this Device Ad Hoc Mode "Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer fashion. That is why Ad Hoc networks are also known as peer-to-peer networks.
  • Page 169 Infrastructure mode refers to a wireless network architecture in which devices communicate with wireless or wired network devices by communicating through an Access Point. In infrastructure mode, wireless devices can communicate with each other or with a wired network. Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., file servers, printers, databases).

  • Page 170: Deactivating/Disconnecting The Wlan Device

    The WLAN device is an optional device that may come pre-installed in your mobile computer. Under normal circumstances, it should not be necessary for you to remove or re-install it. The Operating System that your mobile computer comes with has been pre-configured to support the WLAN device. •...

  • Page 171: Disconnection Using The Icon In The Taskbar

    The WLAN device can be deactivated quickly and efficiently by toggling the Wireless Device On/Off Switch to the Off position. The Wireless Device On/Off switch has no effect on non-Wireless LAN models. WLAN Switch Figure 35. Wireless Device On/Off Switch Location Disconnection Using the Icon in the Taskbar Note that disconnecting via the icon in the system tray does not turn off the radio;...

  • Page 172: Configuring The Wireless Lan

    Configuring the Wireless LAN The optional WLAN device can be configured to establish wireless network connectivity using the software that is built into Windows Vista. Support for most industry standard security solutions is contained in this software. Pre-defined parameters will be required for this procedure. Please consult with your network administrator for these parameters: Configuring the WLAN Using Windows Vista Click the Start button, then select Control Panel.

  • Page 173: Troubleshooting The Wlan

    Troubleshooting the WLAN Troubleshooting Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. Problem Possible Cause Unavailable Incorrect network network name (SSID) or connection network key Weak received signal strength and/or link quality The WLAN device was deactivated or...
  • Page 174 Problem Possible Cause Unavailable The computer to network be connected is connection turned off (continued) RF interference from Access Points or other wireless networks Wireless network authentication has failed Incorrectly configured network settings Incorrect IP address configuration 169 - Appendix A: WLAN User’s Guide Possible Solution Check if the computer to be connected is turned ON.

  • Page 175: Wlan Specifications

    WLAN Specifications Specifications Item Type of network Transfer rate Active frequency Typical operating distances** Number of channels Security Maximum recommended number of computers to be connected over wireless LAN (during ad hoc connection) Specification The Intel WiFi Link 5300 (533AN_HMW) WLAN device and Atheros XSPA conform to IEEE 802.11a, 802.11b/g, and 802.11n (draft-compliant), Wi-Fi based*.
  • Page 176 * “Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees the interconnectivity of wireless LAN (Wi-Fi Alliance) has been passed. ** The communication ranges shown above will increase or decrease depending on factors such as number of walls, reflective material, or interference from external RF sources.

  • Page 177: Using The Bluetooth Device

    Using the Bluetooth Device The Integrated Bluetooth module (EYTF3CSFT) is an optional device available for Fujitsu mobile computers. What is Bluetooth Bluetooth technology is designed as a short-range wireless link between mobile devices, such as laptop computers, phones, printers, and cameras. Bluetooth technology is used to create Personal Area Networks (PANs) between devices in short-range of each other.
  • Page 178 Users are not authorized to modify this product. Any modifications invalidate the warranty. This equipment may not be modified, altered, or changed in any way without signed written permission from Fujitsu. Unauthorized modification will void the equipment authorization from the FCC and Industry Canada and the warranty.

  • Page 179: Using A Uwb Device

    Using a UWB Device The Integrated Certified Wireless USB (UWB) module is an optional device available for Fujitsu mobile computers. What is Certified Wireless USB? Certified Wireless USB, (hereinafter WUSB), is a short range, high bandwidth RF communication protocol that is capable of sending 480 Mbps at distances up to 3 meters (approximately 10 feet) and 110 Mbps at up to 10 meters (approximately 33 feet).

  • Page 180: Introducing The Optional Fingerprint Sensor Device

    Appendix B: Fingerprint Sensor Device Introducing the Optional Fingerprint Sensor Device Your system may have an optional fingerprint sensor device below the Touchpad, between the left and right buttons. This also serves as a scroll button. FINGERPRINT SENSOR CAN BE USED FOR SCROLLING SENSOR THE SAME AS YOU WOULD USE A SCROLL BUTTON Fingerprint sensor LTHOUGH THE SYSTEM MAY HAVE A FINGERPRINT SENSOR IN PLACE OF A SCROLL BUTTON...

  • Page 181: Getting Started

    • Log onto Windows • Resume from sleep mode • Cancel a password-protected screen saver • Log into homepages that require a username and password After you have “enrolled” - or registered - your fingerprint, you can simply swipe your fingertip over the sensor for the system recognize you.
  • Page 182 The OmniPass application requires space on your hard drive; it also requires specific Operating Systems (OS’s). The minimum requirements are as follows: • Windows XP Professional operating system • At least 35 MB available hard disk space Installing the OmniPass Application If OmniPass is already installed on your system, go to “User Enrollment”...
  • Page 183 After you have completed installing OmniPass and restarted your system, you may wish to check the version of OmniPass on your system. To check the version information of OmniPass: From the Windows Desktop, double-click the key-shaped OmniPass icon in the taskbar (usually located in the lower right corner of the screen), Click the Start button, select Settings, and click Control Panel.

  • Page 184: User Enrollment

    Before you can use any OmniPass features you must first enroll a user into OmniPass. Master Password Concept Computer resources are often protected with passwords. Whether you are logging into your computer, accessing your email, e-banking, paying bills online, or accessing network resources, you often have to supply credentials to gain access.
  • Page 185 The Enrollment Wizard will guide you through the process of enrolling a user. Unless you specified otherwise, after OmniPass installation the Enrollment Wizard will launch on Windows login. If you do not see the Enrollment Wizard, you can bring it up by clicking Start on the Windows taskbar; select Programs;...

  • Page 186: Using Omnipass

    During initial user enrollment, you will be prompted to select the finger you wish to enroll. Fingers that have already been enrolled will be marked by a green check. The finger you select to enroll at this time will be marked by a red arrow.

  • Page 187: Omnipass Authentication Toolbar

    OmniPass Authentication Toolbar After installing OmniPass and restarting, you will notice a dialog you have not seen before at Windows Logon. This is the OmniPass Authentication Toolbar, and it is displayed whenever the OmniPass authentication system is invoked. The OmniPass authentication system may be invoked frequently: during Windows Logon, during OmniPass Logon, when unlocking your workstation, when resuming from sleep or hibernate, when unlocking a password-enabled screensaver, during password replacement for remembered site or application logins, and more.
  • Page 188 After clicking the OmniPass key cursor near the login prompt, OmniPass will prompt you to enter a “friendly name” for this site. You should enter something that reminds you of the website, the company, or the service you are logging into. In its secure database, OmniPass associates this friendly name with this website.
  • Page 189 the site, and the OmniPass authentication settings for the site are now stored in the OmniPass secure database. The OmniPass authentication settings (Settings for this Password Site) can always be changed in Vault Management. Logging in to a Remembered Site Whether or not OmniPass prompts you to authenticate when you return to a remembered site is determined by Settings for this Password Site and can be changed in Vault Management.
  • Page 190 You can view the credentials stored for any remembered website by highlighting the desired resource under Password Protected Dialog and clicking Unmask Values. Should a password be reset, or an account expire, you can remove stored credentials from OmniPass. Highlight the desired resource under Password Protected Dialog and click Delete Page.
  • Page 191 HEN YOU DELETE AN IDENTITY PROTECTED DIALOGS ARE LOST To set the default identity, highlight the identity you want as default and click [Set as Default]; click [Apply] to ensure the settings are saved. If you log in to OmniPass with a fingerprint device, you will automatically be logged in to the default identity for that OmniPass user.
  • Page 192 This section gives an overview of both the Export/Import function and the OmniPass Control Center. Exporting and Importing Users OU CANNOT IMPORT A USER INTO ENROLLED IN Using OmniPass Control Center, you can export and import users in and out of OmniPass. The export process backs up all remembered sites, credentials, and enrolled fingerprints for an OmniPass user.
  • Page 193 protected. This user profile does NOT contain any of your encrypted data files. Importing an OmniPass User Profile To import an OmniPass user open the OmniPass Control Center, and click Import/Export User under Manage Users. Click Imports a new user into OmniPass and then select OmniPass Import/Export File (*.opi) and click Next.

  • Page 194: Omnipass Control Center

    This section will serve to explain functions within the OmniPass Control Center that weren’t explained earlier. You can access the OmniPass Control Center any of three ways: • Double-click the golden OmniPass key shaped icon in the Windows taskbar (typically in the lower- right corner of the desktop) •...
  • Page 195 User Settings The User Settings tab has four interfaces: Audio Settings, Taskbar Tips, and Enrollment. User settings allow users to customize OmniPass to suit their individual preferences. Under User Settings (Audio Settings and Taskbar Tips) you can set how OmniPass notifies the user of OmniPass events (e.g., successful login, access denied, etc.).
  • Page 196 You cannot use OmniPass to create Windows users. You must first create the Windows user, and you will need administrative privileges to do that. Once the Windows user is created, you can add that user to OmniPass using the same username and password Cannot add Windows users to OmniPass If you experience difficulties adding a Windows user to OmniPass, you may need to adjust your local security settings.
  • Page 197 If you are having difficulties due to the first reason, you will need to update OmniPass with your changed Windows account password. Click Update Password and you will be prompted with a dialog to reconfirm your password. Enter the new password to your Windows user account and click OK. If the error persists, then it is unlikely the problem is due to your Windows user account password changing.

  • Page 198: Index

    Index About This Guide adapter indicator plug adapters Anti-theft lock slot Application Panel Auto/Airline Adapter Battery alarm care charging indicator cold-swapping conserving power dead faulty increasing life level indicators lithium ion battery problems recharging replacing shorted Sleep mode BIOS guide setup utility Bluetooth Built-in Speakers...
  • Page 199 OmniPass Flexible Bay cold-swapping devices eject lever installing Modular Multi-Format DVD Writer removing Fujitsu Contact Information Fujitsu Driver Update utility Fujitsu LifeBook storing traveling Function Key Hard Disk Drive problems Headphone Jack Hibernation Feature disable/enable Infrared Port...

  • Page 200: Modem Result Codes

    LAN (RJ-45) Jack LifeBook Security Application Panel buttons configuring deactivating deactivating and activating launching applications operating passwords uninstalling LifeBook Security/Application Panel Media Player care Control Panel loading removing Software using Memory capacity compartment installing problems removing upgrade module Memory Stick installing removing Microphone Jack...

  • Page 201: Universal Serial Bus Ports

    Registration Restarting Restoring Your Pre-installed Software RJ-11 RJ-45 ScrLk SD Card installing removing SDRAM Security Indicator Security Panel 90, 101 Serial Port Sleep Mode Specifications Audio Chipset Dimensions and Weight Environmental Requirements Keyboard Memory Microprocessor Power Video Status Indicator Panel Stereo Speakers 15, 31 Touchpad...

Table of Contents

Save PDF