hit counter script
Fujitsu LifeBook S6510 User Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Laptop
  5. S6510 - LifeBook - Core 2 Duo GHz
  6. User manual

Fujitsu LifeBook S6510 User Manual

Fujitsu notebook user's guide
Hide thumbs Also See for LifeBook S6510:
Table of Contents

Advertisement

Quick Links

Download this manual
User's Guide
Learn how to use
your Fujitsu LifeBook
S6510 notebook

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu LifeBook S6510

Summary of Contents for Fujitsu LifeBook S6510

  • Page 1 User’s Guide Learn how to use your Fujitsu LifeBook S6510 notebook...
  • Page 2 Copyright and Trademark Information Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document.
  • Page 3 © Copyright 2007 Fujitsu Computer Systems Corporation. All rights reserved. No part of this publication may be copied, reproduced, or translated, without prior written consent of Fujitsu. No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu.
  • Page 4 This unit requires an AC adapter to operate. Use only UL Listed I.T.E. Class II Adapters with an output rating of 19 VDC, with a current of 4.22A (80 W). AC adapter output polarity: When using your notebook equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: •...

  • Page 5: Recycling Your Battery

    * To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site at in Canada. www.fujitsu.ca/products/notebooks ** RBRC is an independent third party to which Fujitsu provides funding for battery recycling; RBRC is in no way affiliated with Fujitsu. STATE OR FEDERAL LAWS or call 1-800-822-8837.

  • Page 6: Table Of Contents

    Fujitsu Contact Information ........9...
  • Page 7 Using the Keyboard ......... . 27 Touchpad Pointing Device .
  • Page 8 Fujitsu Driver Update Utility ........59...
  • Page 9 Installing Memory Stick/SDxD Cards ......78 Removing A Memory Stick/SD/xD Card......78 Using PC Cards .
  • Page 10 Re-installing Individual Drivers and Applications ....112 Restoring the Operating System for Windows XP Systems... . 113 Restoring the Operating System for Windows Vista Systems .
  • Page 11 Dimensions and Weight ........134 Environmental Requirements .
  • Page 12 Specifications ..........172 Using the Bluetooth Device.

  • Page 13: Preface

    Pages with additional information about a specific topic are cross-referenced within the text. For example: (“See Installation Procedure on page 43”.) On screen menu items appear in bold. Example: “Click Fujitsu Menu, and select your choice”. DOS commands you enter appear in Courier type. Example: “Shutdown the computer?”...

  • Page 14: Fujitsu Contact Information

    HE WARNING ICON HIGHLIGHTS INFORMATION THAT CAN BE HAZARDOUS TO EITHER YOU OOK NOTEBOOK Fujitsu Contact Information Service and Support You can contact Fujitsu Service and Support in the following ways: • Toll free: 1-800-8Fujitsu (1-800-838-5487) • E-mail: 8fujitsu@us.fujitsu.com • Website: http://www.computers.us.fujitsu.com/support...
  • Page 15 OU MUST HAVE AN ACTIVE INTERNET CONNECTION TO USE THE ONLINE Limited Warranty Your LifeBook notebook is backed by a Fujitsu International Limited Warranty. Check the service kit that came with your notebook for the Limited Warranty period and terms and conditions.

  • Page 16: Getting To Know Your Lifebook

    Getting to Know Your LifeBook Overview This section describes the components of your Fujitsu LifeBook S6510 notebook. We strongly recommend that you read it before using your notebook – even if you are already familiar with notebook computers. Figure 1. Fujitsu LifeBook S6510 notebook...

  • Page 17: Locating The Controls And Connectors

    Locating the Controls and Connectors Web Camera Fingerprint Sensor Wireless LAN/ Bluetooth On/Off Switch IEEE1394 Jack Headphone Jack Microphone Jack S-Video Out Jack Display Panel Latch Button Status Indicator Panel Figure 2. LifeBook notebook with display open 12 - Locating the Controls and Connectors Display Panel LifeBook Security/ Application Panel...

  • Page 18: Top Components

    Top Components The following is a brief description of your LifeBook notebook’s top components. Display Panel The display panel is a color LED panel with back lighting for the display of text and graphics. LifeBook Security/Application Panel The LifeBook Security/Application Panel provides hardware security and one-touch application launch capability.
  • Page 19 Display Panel Latch Button The display panel latch button is used to latch and unlatch the display. See “Opening the Display Panel” on page 50. S-Video Out Jack The S-Video output is used to transmit a higher resolution video signal to a compatible TV or VCR. Note that in order to use this jack, you must use the S-Video adapter cable that came with your system.

  • Page 20: Left-Side Panel Components

    LAN (RJ-45) Jack PC Card Slot DC-In Jack PC Card Eject Button Infrared Port Air Vents Memory Stick/SD/xD Card Slot External Video Port Figure 3. LifeBook notebook left-side panel Left-Side Panel Components The following is a brief description of your LifeBook notebook’s left-side components. Gigabit LAN (RJ-45) Jack The internal LAN (RJ-45) jack is used for an internal Gigabit (10Base-T/100Base-Tx/1000Base-T) Ethernet LAN connection.
  • Page 21 DC Power Jack The DC power jack allows you to plug in the AC adapter to power your LifeBook notebook and charge the internal Lithium ion battery. PC Card Slot The PC Card Slots allow you to install a PC Card. See “Using PC Cards” on page 79. PC Card Eject Button The PC Card eject button is used for removing a PC Card from the slot.

  • Page 22: Right-Side Panel Components

    Anti-Theft Lock Slot Modem Jack USB Ports Figure 4. LifeBook notebook right-side panel Right-Side Panel Components The following is a brief description of your LifeBook notebook’s right-side components. Anti-theft Lock Slot The anti-theft lock slot allows you to attach an optional physical lock down device. USB 2.0 Ports The USB 2.0 ports allow you to connect Universal Serial Bus devices.
  • Page 23 MAXIMUM SPEED OF RATE DEPENDS ON THE LINE CONDITIONS ACCORDANCE WITH OR ADDITIONAL INFORMATION ABOUT THE MODEM FUJITSU COMPUTERS Air Vents The air vents allow air to circulate through the system to cool down the components. O PROTECT YOUR NOTEBOOK FROM DAMAGE AND TO OPTIMIZE PERFORMANCE...
  • Page 24 Flexible Bay The flexible bay can accommodate any of the following modular devices. (See “Flexible Bay Devices” on page 36.) • Modular Dual-Layer Multi-Format DVD Writer • Modular DVD/CD-RW combo drive • Modular Lithium ion battery • Weight Saver 19 - Locating the Controls and Connectors...

  • Page 25: Back Panel Components

    Anti-Theft Lock Slot Figure 5. LifeBook notebook back panel Back Panel Components Following is a brief description of your LifeBook notebook’s back panel components. Anti-theft Lock Slot The anti-theft lock slot allows you to attach an optional physical lock down device. 20 - Locating the Controls and Connectors...

  • Page 26: Bottom Components

    Figure 6. LifeBook notebook bottom panel Bottom Components The following is a brief description of your LifeBook notebook’s bottom panel components. Lithium ion Battery Bay The battery bay contains the internal Lithium ion battery. It can be unlatched for the removal of the battery when stored over a long period of time or for swapping a discharged battery with a charged Lithium ion battery.
  • Page 27 Battery Release Latches The battery release latches are used to lock and release the battery in the battery bay. See “Lithium ion Battery” on page 65. Flexible Bay Device Lock The flexible bay device lock is used to lock and release a modular flexible bay device in the flexible bay. See “Flexible Bay Devices”...

  • Page 28: Status Indicator Panel

    Power AC Adapter Status Indicator Panel The Status Indicators display symbols that correspond to specific components of your Fujitsu LifeBook notebook. The LEDs below each symbol tell you how each of those components is operating. Power Indicator The Power indicator symbol states whether your system is operational. It has several different states, each of which tells you the mode your notebook is in.

  • Page 29: Ac Adapter Indicator

    • Steady Off: This means that your system is either in Save-to-Disk mode, or that your notebook has been turned off. If you are charging your battery, the Power indicator will remain on even if your notebook is shut off. The Power indicator will also remain on if you have either adapter connected and are shut down from Windows.

  • Page 30: Hard Drive/Optical Drive Access Indicator

    • Orange, solid: Battery is between 13% and 50% charged. • Red, solid: Battery is 12% or less charged. • Orange, blinking: Blinks during battery status measurement (Four seconds after the battery is installed). • Red, blinking: There is a problem with the battery. •...
  • Page 31 CapsLock Indicator The CapsLock indicator states that your keyboard is set to type in all capital letters. ScrLk Indicator The ScrLk indicator states that your scroll lock is active. 26 - Status Indicator Panel...

  • Page 32: Keyboard

    Start Key Using the Keyboard Your Fujitsu LifeBook notebook has an integral 84-key keyboard. The keys perform all the standard functions of a 101-key keyboard, including the Windows keys and other special function keys. This section describes the following keys.
  • Page 33 the right, left, up, or down within windows, applications and documents. • Function keys: The keys labeled [F1] through [F12], are used in conjunction with the [Fn] key to produce special actions that vary depending on what program is running. •...
  • Page 34 Function Keys Your LifeBook notebook has 12 function keys, F1 through F12. The functions assigned to these keys differ for each application. You should refer to your software documentation to find out how these keys are used. • The [Fn] key provides extended functions for the notebook and is always used in conjunction with another key.

  • Page 35: Touchpad Pointing Device

    Figure 9. Touchpad pointing device The Touchpad pointing device comes built into your Fujitsu LifeBook notebook. It is used to control the movement of the pointer to select items on your display panel. The Touchpad is composed of a cursor control, a left button, a right button, and a scroll/fingerprint sensor.
  • Page 36 N EXTERNAL MOUSE CAN BE CONNECTED TO THE USED SIMULTANEOUSLY WITH THE EXTERNAL MOUSE CONNECTED THE SPECIFICATIONS IN YOUR Clicking Clicking means pushing and releasing a button. To left-click, move the cursor to the item you wish to select, press the left button once, and then immediately release it.
  • Page 37 Double-Clicking Double-clicking means pushing and releasing the left button twice in rapid succession. This procedure does not function with the right button. To double-click, move the cursor to the item you wish to select, press the left button twice, and immediately release it. You can also perform the double-click operation by tapping lightly on the Touchpad twice.
  • Page 38 Dragging Dragging means pressing and holding the left button, while moving the cursor. To drag, move the cursor to the item you wish to move. Press and hold the left button while moving the item to its new location and then release it.

  • Page 39: Touchpad Control Adjustment

    Scrolling Using the fingerprint sensor as a scrolling button allows you to navigate through a document quickly without using the window’s scroll bars. This is particularly useful when you are navigating through on-line pages. To use the sensor, slide your finger forwards or backwards, depending upon the direction you want to scroll.

  • Page 40: Volume Control

    Volume Control Your Fujitsu LifeBook notebook has multiple volume controls which interact with each other. NY SOFTWARE THAT CONTAINS AUDIO FILES WILL ALSO CONTAIN A VOLUME CONTROL OF ITS OWN YOU INSTALL AN EXTERNAL AUDIO DEVICE THAT HAS AN INDEPENDENT VOLUME CONTROL...

  • Page 41: Flexible Bay Devices

    Flexible Bay Devices Your Fujitsu LifeBook notebook contains a Flexible Bay. The Flexible Bay can house an optical drive, a Lithium ion battery, or a weight saver. Your Flexible Bay will have one of the following devices installed. • Modular Dual-Layer Multi-Format DVD Writer: This allows you to access movies, software, and audio DVD/CDs and record to DVD, CD, and DVD-RAM discs.

  • Page 42: Removing And Installing Modular Devices

    Removing and Installing Modular Devices There are two ways to remove and install modular devices in the Flexible Bay: • Cold-swapping: swapping devices while your LifeBook notebook is powered off. • Hot-swapping: swapping devices while your system is active, using the Safely Remove Hardware icon from your system tray.
  • Page 43 Your LifeBook notebook will automatically detect the new device and activate it within your system. The drive letters associated with the device will be created and listed under My Computer and Windows Explorer. Hot-swapping Hot-swapping is provided through the Safely Remove Hardware utility. The icon for the utility appears in the system tray.

  • Page 44: Lifebook Security/Application Panel

    LifeBook Security/Application Panel A unique feature of your LifeBook notebook is the Security/Application Panel that allows you to secure your notebook from unauthorized use. The Security/Application Panel also allows you to launch applications with the touch of a button when your system is on. If the security system is activated, upon starting your notebook or resuming from suspend mode, the security system requires you to enter a password code using the buttons on the Security/Application Panel.

  • Page 45: Setting Up Your Lifebook Security Panel

    Setting up Your LifeBook Security Panel When you receive your LifeBook notebook, the security panel application is pre-installed without any passwords. The following sections provide detailed information on your security panel, and how to set, change or remove passwords. Numbered Buttons Use these buttons to enter your password.
  • Page 46 Depending upon your operating system, use the appropriate procedure below. Windows XP: Go to the Start menu. Click on Run. Type in: C:\Program Files\Fujitsu\Security Panel Application\Supervisor\FJSECS.EXE, then press [Enter] Follow the on-screen instructions to set the Supervisor password. Windows Vista: Go to the Start menu.

  • Page 47: Operating Your Lifebook Security/Application Panel

    Setting User Password Windows XP: Go to the Start menu. Click on Programs. Click on Security Panel Application and Set User Password. Follow the on-screen instructions to set the user password Windows Vista: Go to the Start menu. Select All Programs. Select Security Panel Application and Set User Password.

  • Page 48: Precautions

    From Suspend State Press your Power/Suspend/Resume button. When the Security Indicator flashes, enter the password and press [Enter] button. The notebook should resume normal operation. Incorrect Password Entry If an invalid supervisor or user password is entered three times in succession, the system will “beep” for about one minute.

  • Page 49: Uninstalling The Security Panel Application

    You have two options when uninstalling the security panel application: • Uninstall the security panel application software. This will disable all security feature. • Uninstall the security panel application with password still active. This will not allow any changes to the password. Uninstalling the Security Panel Application Remove passwords when the User wants no password protection whatsoever and doesn’t want to give anybody the utility to set a password on their computer.
  • Page 50 You need to run FJSECS.exe first to set the supervisor password. Follow instructions under Setting Passwords on page 41. If you forget both passwords, contact Fujitsu Computer Systems Corporation Service and Support at 1- 800-8FUJITSU (1-800-838-5487). Fujitsu Computer Systems Corporation charges a service fee for unlocking a password restricted LifeBook notebook.

  • Page 51: Launching Applications With The Security/Application Panel

    The security panel also enables you to launch applications with the touch of a button when your system is on. Pressing any of the buttons will launch a user-defined application. Your notebook is pre-installed with software utilities that let you operate and configure your LifeBook Security /Application Panel. These utilities are found in the Control Panel under Application Panel.
  • Page 52 Explorer), unless you have changed this in Windows. In order to reconfigure it to launch another program follow these easy steps: Click on Other from the Internet browser box. Click on Browse from Start Menu. Scroll down the list of applications, and then click on the application you wish to launch with this button. Click OK.

  • Page 53: Getting Started With Your Lifebook

    Getting Started with Your LifeBook DC Power Jack AC Adapter Figure 20. Connecting the AC Adapter Power Sources Your Fujitsu LifeBook notebook has three possible power sources: a primary Lithium ion battery, an AC adapter or an optional Auto/Airline adapter.

  • Page 54: Connecting The Power Adapters

    The AC adapter or optional Auto/Airline adapter provides power for operating your notebook and charging the batteries. Connecting the AC Adapter Plug the DC output cable into the DC power jack of your LifeBook notebook. Plug the AC adapter into an AC electrical outlet. Connecting the Optional Auto/Airline Adapter Plug the DC output cable into the DC power jack on your notebook.

  • Page 55: Display Panel

    Display Panel Latch Button Display Panel Your Fujitsu LifeBook notebook contains a display panel that is backlit for easier viewing in bright environments and maintains top resolution through the use of active-matrix technology. Opening the Display Panel Press the Display Panel latch button in. This releases the locking mechanism, allowing you to raise the display.

  • Page 56: Adjusting Display Panel Brightness

    Once you have turned on your LifeBook notebook, you may want to adjust the brightness level of the screen to a more comfortable viewing level. There are two ways to adjust the brightness, by using the keyboard or the power management utility. Using the Keyboard Adjusting the brightness using the keyboard changes the setting only temporarily.

  • Page 57: Starting Your Lifebook Notebook

    Starting Your LifeBook Notebook Power On Power/Suspend/Resume Button The Power/Suspend/Resume button is used to turn on your LifeBook notebook from its off state. Once you have connected your AC adapter or charged the internal Lithium ion battery, you can power on your LifeBook notebook.

  • Page 58: Boot Sequence

    This information is in the BIOS program. Each time you power up or restart your notebook, it goes through a boot sequence which displays a Fujitsu logo until your operating system is loaded. During booting, your notebook is performing a standard boot sequence including a Power On Self Test (POST).

  • Page 59: Bios Setup Utility

    Turn on or restart your LifeBook notebook. To enter the BIOS Setup Utility, press the [F2] key once the Fujitsu logo appears on the screen. This will open the main menu of the BIOS Setup Utility with the current settings displayed.

  • Page 60: Booting The System

    When you turn on your notebook for the first time, it will display a Fujitsu logo on the screen. If you do nothing the system will load the operating system, and then the Windows Welcome will begin.
  • Page 61 First of all, you will need to read and accept the End User License Agreements (EULAs). • F YOU REJECT THE TERMS OF THE LICENSE AGREEMENTS YOU WILL BE ASKED TO REVIEW THE LICENSE AGREEMENTS FOR INFORMATION ON RETURNING • OU CANNOT USE YOUR NOTEBOOK UNTIL YOU HAVE ACCEPTED THE PROCESS YOUR NOTEBOOK WILL RETURN TO THE BEGINNING OF THE YOU SHUT YOUR NOTEBOOK DOWN AND START IT UP AGAIN...

  • Page 62: Starting Windows Xp The First Time

    Registering Windows XP with Microsoft In order to ensure that you receive the most benefits from the Windows operating system, it should be registered the first time you use it. After you receive the Windows Welcome screen, you will be prompted to enter registration information in the following order.

  • Page 63: Registering Your Lifebook Notebook With Fujitsu

    You can register your LifeBook by going to our website at: us.fujitsu.com/computers. You will need to be set up with an Internet Service Provider (ISP) to register online. Installing Click Me! ClickMe! EFORE INSTALLING THE Windows Vista Systems The first time you boot up your system, you will see a “Primary Settings for the PC” window. This window explains the installations which will be performed by the Click Me! utility.

  • Page 64: Fujitsu Driver Update Utility

    Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. For more information about the FDU utility, refer to “Automatically Downloading Driver Updates” on page 118.

  • Page 65: Power Management

    Power Management Your Fujitsu LifeBook notebook has many options and features for conserving battery power. Some of these features are automatic and need no user intervention, such as those for the internal modem. However, others depend on the parameters you set to best suit your operating conditions, such as those for the display brightness.

  • Page 66: Standby (Sleep) Mode

    Standby (Sleep) mode in Windows saves the contents of your system memory during periods of inactivity by maintaining power to critical parts. This mode turns off the CPU, display, hard drive, and all other internal components except those necessary to maintain system memory and for restarting. Your notebook can be put in Standby mode by: •...

  • Page 67: Hibernation (Save-To-Disk) Feature

    The Hibernation feature saves the contents of your notebook’s system memory to the hard drive as a part of the Suspend/Resume mode. You can enable or disable this feature. Enable or Disable the Hibernation Feature Windows Vista: The default settings are not enabled. To enable or disable the Hibernation feature follow these steps: From the Start menu, select Control Panel.

  • Page 68: Restarting The System

    If your system is on and you need to restart it, be sure that you use the following procedure. Windows Vista: Click the Start button, and then move the mouse over the right arrow. Select the desired action from the list. Windows XP: Click the Start button, and then click Shut Down.
  • Page 69 Using the correct procedure to shut down from Windows allows your notebook to complete its operations and turn off power in the proper sequence to avoid errors. The proper sequence is: Windows Vista: Click the [Start] button, and then move the mouse over the small arrow at the bottom right of the right- hand pane.

  • Page 70: User-Installable Features

    Chapter 3 User-Installable Features Lithium ion Battery Your LifeBook notebook has a Lithium ion battery that provides power for operating your notebook when no external power source is available. The battery is durable and long lasting, but should not be exposed to extreme temperatures, high voltages, chemicals or other hazards.

  • Page 71: Recharging The Batteries

    • CTUAL BATTERY LIFE WILL VARY BASED ON SCREEN BRIGHTNESS MANAGEMENT SETTINGS DRIVE ULTI ORMAT HAVE A SIGNIFICANT IMPACT ON BATTERY LIFE THE BATTERY AGES NEW ONE • NDER FEDERAL THEM IN THE TRASH PROPERLY HECK WITH YOUR LOCAL GOVERNMENT AUTHORITY FOR DETAILS REGARDING RECYCLING OR DISPOSING OF OLD BATTERIES YOUR SUPPORT REPRESENTATIVE AT Recharging the Batteries...
  • Page 72 SING HEAVY CURRENT DEVICES SUCH AS THE MODEM OR FREQUENT ACCESSES MAY PREVENT CHARGING COMPLETELY Low Battery State When the battery is running low, a low battery notification message will appear. If you do not respond to the low battery message, the batteries will continue to discharge until they are too low to operate. When this happens, your notebook will go into Standby mode.

  • Page 73: Replacing The Battery

    With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not charged. There are two ways to swap batteries, cold-swapping and hot-swapping: Cold-swapping Batteries To cold-swap batteries in your battery bay follow these easy steps: Have a charged battery ready to install.
  • Page 74 Battery Lift Point Left Battery Latch Right Battery Latch Battery Pack Figure 22. Removing a Battery Follow steps 3 through 6 in “Cold Swapping Batteries”. F THE ITHIUM ION BATTERY CONNECTOR IS NOT FULLY SEATED YOU MAY NOT BE ABLE TO USE YOUR NOTEBOOK OR CHARGE YOUR BATTERY 69 - Lithium ion Battery...

  • Page 75: Optical Drive

    Emergency Tray Release Media Tray Eject Button Media Holder Tray Figure 23. Optical Drive Optical Drive There is a variety of media available to use with your system, depending upon the system configuration you have selected. Multi-Format DVD Writers and DVD/CD-RW Combo drives are collectively known as “optical drives”.

  • Page 76: Media Player Software

    audio DVD/CDs as well as to read and write to CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW, and DVD RAM discs. The dual-layer architecture allows you to record up to 8.5 GB of data on DVD+R discs. Media Player Software Dual-Layer Multi-Format DVD Writer model only: With the Dual-Layer Multi-Format DVD Writer and media player software you can play DVD movies and music CDs on your LifeBook notebook.
  • Page 77 THAT YOU CAN ONLY CHANGE THE REGION CODE UP TO FOUR TH CHANGE THE LAST CODE ENTERED BECOMES PERMANENT NSERT OTIFICATION OMPUTER OR FROM WITHIN 72 - Optical Drive FUJITSU COMPUTERS FOR THE WHICH IFFERENT REGION ROPERTIES MENU OF THE AND CANNOT BE UNCTION...

  • Page 78: Removing Media

    Figure 24. Loading/Ejecting Media Removing Media Push and release the eject button on the front of the optical drive. This will stop the drive and the holder tray will come out of the LifeBook notebook a short distance. Gently pull the tray out until the disc can easily be removed from the tray. Carefully remove the media disc from the holder tray.

  • Page 79: Using The Media Player Software

    Emergency Optical Drive Tray Release If for some reason the eject button fails, you can open the media tray with a paper clip or similar tool inserted into the eject hole in the right side of the front of the tray as shown in Figure 25.

  • Page 80: Using Media Player On Battery Power

    Opening the Media Player Control Panel With most DVD-ROMs, you have the option of altering how the movie should play and what you wish to view. You can do this by using the media player control panel and the mouse. Right-click on the movie screen to open a dropdown menu for options.
  • Page 81 ’ F YOU DON T HAVE AN ADDITIONAL BATTERY HTTP COMPUTERS FUJITSU OOK NOTEBOOK WILL SHUT DOWN IMPROPERLY MOVIES MAY NOT REQUIRE YOU TO SWAP BATTERIES OR ATTACH OWEVER IT IS BEST TO BE PREPARED SINCE ACTUAL BATTERY LIFE WHILE...

  • Page 82: Memory Stick/Secure Digital/Xd Cards

    Memory Stick SD Card xD Card Figure 26. Memory Stick, SD Card, xD Card Figure 27. Installing a Memory Stick/SD/xD Card Memory Stick/Secure Digital/xD Cards Your LifeBook notebook supports Memory Sticks, Secure Digital (SD), and xD-Picture cards, on which you can store and transfer data to and from a variety of digital devices. These cards use flash memory architecture, which means they don’t need a power source to retain data.

  • Page 83: Installing Memory Stick/Sdxd Cards

    one. xD-Picture Cards are primarily used to store and transfer images with devices such as cell phones. Installing Memory Stick/SDxD Cards Memory Stick, SD, and xD Cards are installed in the Memory Stick/SD/xD Card slot. To install a card, follow these steps NSTALLING OR REMOVING A SHUTDOWN OR BOOTUP PROCESS MAY DAMAGE THE CARD AND O NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS...

  • Page 84: Using Pc Cards

    Using PC Cards Your LifeBook notebook supports PC Cards, which can perform a variety of functions depending on which type of card you install. Some available PC Cards: • Gigabit Ethernet Local area network (LAN) cards • IEEE1394 cards • S-ATA II cards •...

  • Page 85: Installing Pc Cards

    • NSTALLING OR REMOVING A PROCESS MAY DAMAGE THE CARD AND • O NOT INSERT A CARD AS YOU MAY PERMANENTLY DAMAGE THE CARD OU MAY BE REQUIRED TO LOG ON AS ROUP TO COMPLETE THIS PROCEDURE NETWORK POLICY SETTINGS MAY ALSO PREVENT YOU FROM COMPLETING THIS PROCEDURE See your PC Card manual for instructions on the installation of your card.

  • Page 86: Removing Pc Cards

    See your PC Card manual for specific instructions on removing your card. Some cards may require your notebook to be in Standby Mode or Off during removal. • INDOWS HAS A SHUTDOWN PROCEDURE FOR . (R CARD EVIEW YOUR OPERATING SYSTEM MANUAL FOR THE CORRECT PROCEDURE REMOVE DEVICES USING THE •...

  • Page 87: Memory Upgrade Module

    Memory Upgrade Module Your Fujitsu LifeBook notebook comes with a minimum of 512 MB of high speed Double Data Rate Synchronous Dynamic RAM (DDR2-667 SDRAM) factory installed. To increase your notebook’s memory capacity, you may install an additional memory upgrade module. The memory upgrade must be a dual-in- line (DIMM) SDRAM module.
  • Page 88 Align the memory upgrade module with the component side up. Align the connector edge of the memory upgrade module with the connector slot in the compartment. Be sure the alignment keys line up with thos in the slot. Figure 29. Opening the Memory Compartment Insert the memory upgrade module at a 45°...

  • Page 89: Removing A Memory Upgrade Module

    Removing a Memory Upgrade Module Perform steps 1 through 4 of Installing a Memory Upgrade Module. Pull the clips sideways away from each side of the memory upgrade module at the same time. While holding the clips out, remove the module from the slot by lifting it up and pulling it away from your notebook.
  • Page 90 There may be a variation between the actual memory size and what is displayed. This is possible if your system is configured with an integrated Intel Graphics Media Accelerator X3100 which dynamically allocates system memory to accelerate graphics performance. F THE TOTAL MEMORY DISPLAYED IS INCORRECT PROPERLY INSTALLED CORRECTLY RECOGNIZED CHECK THAT YOUR MEMORY UPGRADE MODULE IS...

  • Page 91: Device Ports

    Device Ports Your Fujitsu LifeBook notebook and the optional Port Replicator come equipped with multiple ports to which you can connect external devices including: disk drives, keyboards, modems, printers, etc. Modem (RJ-11) Telephone Jack The modem (RJ-11) telephone jack is used for an internal modem. To connect the telephone cable follow these easy steps: Align the connector with the port opening.

  • Page 92: Infrared Port

    Select the Modems tab, and click the [Properties] button. Select the Modem tab and adjust the volume as necessary. HE INTERNAL MODEM IS NOT INTENDED FOR USE WITH THE INTERNAL MODEM TO A MODEM OR YOUR ENTIRE DOCUMENTATION FOR DETAILS BEFORE YOU CONNECT YOUR MODEM •...

  • Page 93: Ieee 1394 Port

    The 4-pin 1394 port allows you to connect digital devices that are compliant with IEEE 1394 standard (also known as “FireWire”). The IEEE 1394 standard is easy to use, connect, and disconnect. This port allows up to 400 Mbps transfer rate. A third-party application may be required to operate your device with the 1394 port 1394 PORT USED IN THIS SYSTEM USES A FOUR...

  • Page 94: Internal Lan (Rj-45) Jack

    The internal LAN (RJ-45) jack is used for a Gigabit (10Base-T/100Base-Tx/1000Base-T) Ethernet LAN connection. You may need to configure your notebook to work with your particular network. (Please refer to your network administrator for information on your network configuration.) To connect the LAN cable follow these easy steps: Align the connector with the port opening.

  • Page 95: Headphone/Line-Out Jack

    Figure 35. Connecting a USB Device Headphone/Line-Out Jack The headphone/line-out jack allows you to connect headphones or powered external speakers to your notebook. Your headphones or speakers must be equipped with a 1/8” (3.5 mm) stereo mini-plug. In order to connect headphones or speakers follow these easy steps: Align the connector with the port opening.

  • Page 96: Microphone/Line-In Jack

    The microphone/line-in jack allows you to connect an external mono microphone. Your microphone must be equipped with a 1/8”(3.5 mm) mono mini-plug in order to fit into the microphone jack of your notebook. In order to connect a microphone follow these easy steps: Align the connector with the port opening.

  • Page 97: S-Video Out Jack

    The S-Video Out jack is used to transmit a higher resolution video signal to a compatible TV or VCR. Note that in order to use this jack, you must use the Mini S-Video Cable Adapter that came with your system. (Figure 37).

  • Page 98: Troubleshooting Your Lifebook

    Chapter 4 Troubleshooting Your LifeBook Troubleshooting There may be occasions when you encounter simple setup or operating problems that you can solve on the spot, or problems with peripheral devices that can be solved by replacing the device. The information in this section helps you isolate and resolve some of these straightforward issues and identify failures that require service.
  • Page 99 If you have tried the solutions suggested in the Troubleshooting Table without success, contact your support representative: Toll free: 1-800-8Fujitsu (1-800-838-5487) E-mail: 8fujitsu@us.fujitsu.com Web site: http://www.computers.us.fujitsu.com/support. Before you place the call, you should have the following information ready so that the customer support representative can provide you with the fastest possible solution: • Product name •...

  • Page 100: Specific Problems

    Using the Troubleshooting Table When you have problems with your LifeBook notebook, try to find the symptoms under the Problem column of the troubleshooting table for the feature giving you difficulty. You will find a description of common causes for that symptom under the column Possible Cause and what, if anything, you can do to correct the condition under Possible Solutions.

  • Page 101: Problem

    Plugging in headphones disables the built-in speakers, remove the headphones. The Audio Driver may be installed or reinstalled by using the Driv- ers and Applications CD that came with your Fujitsu LifeBook. Refer to your application and operating system documentation for help.

  • Page 102: Hard Drive Problems

    Problem Possible Cause LifeBook notebook fails to Incorrect DVD Player or recognize DVD/CD- no DVD Player soft- RW/CD-ROM’s. ware is installed. (continued) Wrong drive designator was used for the disc in the application. DVD/CD-RW/CD-ROM is dirty or defective. The drive access indicator The Windows auto on the Status Indicator insertion function is...

  • Page 103: Memory Problems

    Problem Possible Cause The built-in keyboard does Keyboard locked out by not seem to work. your application. (continued) You have installed an exter- Your external device is nal keyboard or mouse, and not properly installed. it does not seem to work. Your operating system software is not set up with correct software...

  • Page 104: Usb Device Problems

    Problem Possible Cause USB Device Problems You have installed a USB The device is not prop- device. Your LifeBook note- erly installed. book does not recognize The device may have the device, or the device been installed while an does not seem to work application was running, properly.
  • Page 105 Problem Possible Cause You turn on your LifeBook The installed primary notebook and nothing battery is completely seems to happen. discharged, there is no (continued) optional second battery installed or there is no Power adapter (AC or Auto/Airline) installed. The battery or batteries are low.
  • Page 106 Problem Possible Cause Your LifeBook notebook You are operating on turns off all by itself. battery power and ignored a low battery (continued) alarm until the batteries are at the dead battery state and the system has gone into Dead Bat- tery Suspend mode.

  • Page 107: Shutdown And Startup Problems

    Close all applications and try the button again. Set the operating source by pressing the [ESC] key while the Fujitsu logo is on screen or use the [F2] key and enter the setup utility and adjust the source settings from the Boot menu. See “BIOS Setup Utility”...

  • Page 108: Video Problems

    Problem Possible Cause The system powers up, and Internal hard drive was displays power on informa- not detected. tion, but fails to load the operating system. (continued) An error message is dis- Power On Self Test played on the screen during (POST) has detected a the notebook (boot) problem.
  • Page 109 Problem Possible Cause The built-in display is blank The power manage- when you turn on your Life- ment timeouts may be Book notebook. set for very short inter- (continued) vals and you failed to notice the display come on and go off again. The notebook turned on POST has detected a with a series of beeps and...

  • Page 110: Miscellaneous Problems

    Problem Possible Cause The display does not close. A foreign object, such as a paper clip, is stuck between the display and keyboard. The application display The application you are uses only a portion of your running does not sup- screen and is surrounded port 800 x 600/1024 x by a dark frame.

  • Page 111: Power On Self Test Messages

    The following is an alphabetic list of error-and-status messages that Phoenix BIOS and/or your operating system can generate and an explanation of each message. Error messages are marked with an *. If an error message is displayed that is not in this list, write it down and check your operating system documentation both on screen and in the manual.
  • Page 112 *Failure Fixed Disk n (where x=1-4) The fixed disk is not working or not configured properly. This may mean that the hard drive type identified in your setup utility does not agree with the type detected by the Power On Self Test. Run the setup utility to check for the hard drive type settings and correct them if necessary.
  • Page 113 *Stuck Key BIOS discovered a stuck key and displays the scan code for the stuck key. You may have to replace your keyboard but may be able to use an external keyboard until then. Contact your support representative. *Monitor type does not match CMOS – Run SETUP Monitor type not correctly identified in Setup.
  • Page 114 *Press <F1> to resume, <F2> to SETUP Displayed after any recoverable error message. Press the [F1] key to continue the boot process or the [F2] key to enter Setup and change any settings. *Previous boot incomplete – Default configuration used Previous Power On Self Test did not complete successfully.
  • Page 115 *System CMOS checksum bad – Default Configuration Used BIOS CMOS RAM has been corrupted or modified incorrectly, perhaps by an application program that changes data stored in BIOS memory. Run Setup and reconfigure the system. *System RAM Failed at offset: nnnn System memory failed at offset nnnn of in the 64k block at which the error was detected.

  • Page 116: Emergency Media Player Drive Tray Release

    If for some reason the eject button fails, you can open the DVD/CD-ROM tray with a paper clip or similar tool inserted into the eject hole in the far right side of the front of the tray. Straighten one side of a paper clip and push it gently into the hole.

  • Page 117: Restoring Your Pre-Installed Software

    ARE NOT ON THE THE THIRD To re-install drivers and/or applications: Boot up the system and insert the DAR CD after Windows has started. A Fujitsu Installer screen is displayed after the CD is inserted. After reading the License Agreement, click [I agree].

  • Page 118: Restoring The Operating System For Windows Xp Systems

    REY INDICATES A COMPONENT THAT IS ALREADY INSTALLED BUT PRIOR TO INSTALLATION YOU WILL RECEIVE A REMINDER THAT THE YOU WILL NEED TO ATTACH AN EXTERNAL PLAYER VISIT OUR LUE INDICATES GREY ITEMS S ATTACHED TO YOUR EB SITE AT FUJITSU COMPUTERS...

  • Page 119: Restoring The Operating System For Windows Vista Systems

    (rather than booting-up from the hard drive or an external floppy disk drive), perform the following steps: Power on your system. When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left mouse or touchpad button; the TrustedCore Menu will appear.
  • Page 120 Determining whether Recovery and Utility is pre-loaded Turn on or reboot your system. When the Fujitsu logo appears, press [F12] key. From the Boot Menu that appears, check whether the <Recovery and Utility> option is present. If it is not present, it means that the utility must be used from the disc.

  • Page 121: Running Recovery And Utility From The Disc

    (rather than booting-up from the hard drive or an external floppy disk drive), perform the following steps: Power on your system. When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left mouse or touchpad button; the TrustedCore Menu will appear.
  • Page 122 all data from the C: drive. If you decide to use the recovery tool, be sure to back up all data that you don’t want to lose. Also note that you must run the system using your AC adapter while running the recovery tool.

  • Page 123: Automatically Downloading Driver Updates

    Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. The FDU icon should appear in the system tray at the bottom right of your screen (roll the cursor over the icons to find the correct one).

  • Page 124: Care And Maintenance

    Chapter 5 Care and Maintenance Caring for your LifeBook Notebook If you use your Fujitsu LifeBook notebook carefully, you will increase its life and reliability. This section provides some tips for looking after the notebook and its devices. • •...
  • Page 125 If your notebook will not boot after it has dried out, call your support representative. • Do not use your Fujitsu LifeBook notebook in a wet environment (near a bathtub, swimming pool). • Always use the AC adapter and batteries that are approved for your notebook.

  • Page 126: Cleaning Your Lifebook Notebook

    • Always disconnect the power plug. (Pull the plug, not the cord.) • Clean your LifeBook notebook with a damp, lint-free cloth. Do not use abrasives or solvents. • Use a soft cloth to remove dust from the screen. Never use glass cleaners. •...

  • Page 127: Cleaning The Dust Filter

    • Wipe the surface with a soft cloth wipe and a 50% ethanol solution or use another ethanol-based germicide which has been registered as a hospital disinfectant by the EPA. • SE OF INCORRECT CLEANERS CAN RESULT IN OPTICAL IMPAIRMENT OF THE COMPUTER LWAYS REFER TO THE CLEANER MANUFACTURER SHEETS FOR PROPER HANDLING AND USE OF THE PRODUCTS...

  • Page 128: Storing Your Lifebook Notebook

    In addition, a faulty battery might damage your LifeBook. • Store your Fujitsu LifeBook in a cool, dry location. Temperatures should remain between 13ºF (-25ºC) and 140ºF (60ºC). 123 - Caring for your LifeBook Notebook...

  • Page 129: Traveling With Your Lifebook Notebook

    • Do not transport your notebook while it is turned on. • It is recommended that you carry your notebook with you while traveling, rather than checking it in as baggage. • Always bring your System Recovery CD that came with your notebook when you travel. If you experience system software problems while traveling, you may need it to correct any problems.

  • Page 130: Batteries

    Caring for your Batteries • Always handle batteries carefully. • Do not short-circuit the battery terminals (that is, do not touch both terminals with a metal object). Do not carry lose batteries in a pocket or purse where they may mix with coins, keys, or other metal objects.

  • Page 131: Media Care

    Caring for your Media (DVD/CD/CD-R) Media discs are precision devices and will function reliably if given reasonable care. • Always store your media disc in its case when it is not in use. • Always handle discs by the edges and avoid touching the surface. •...

  • Page 132: Pc Cards

    • Avoid using or storing the drive where it will be subjected to shock or vibration. • Do not disassemble or dismantle the optical drive. • Use of a commercially available lens cleaner is recommended for regular maintenance of your drive.

  • Page 133: System Specifications

    Chapter 6 System Specifications Specifications This section provides the hardware and environmental specifications for your Fujitsu LifeBook notebook. Specifications of particular configurations will vary. Configuration Label The configuration label located on the bottom of your notebook contains specific information regarding the options you’ve chosen for your notebook.

  • Page 134: Microprocessor

    Intel® Core™ 2 processors (Refer to the system label to determine the speed of your processor). Chipset • Intel GM965 • I/O Controller Hub 8 Mobile (ICH8-M) Memory System Memory • DDR2-667 MHz SDRAM dual-channel memory module. • Two DIMM slots; upgradeable to 4 GB of total memory (2 GB x 2). Note that when 4 MB of memory is installed in a Windows Vista system, approximately 3.3 GB is addressable memory;...

  • Page 135: Audio

    Video RAM • Intel® Graphics Media Accelerator X3100 video graphics. Up to 384 MB shared video memory using Dynamic Video Memory Technology (DVMT) Audio • Realtek codec ALC262 with 2-channel High Definition (HD) audio. • Headphones: Stereo headphone/line-out jack, 3.5 mm, 1 V Ohms •...

  • Page 136: Features

    • Optional Bluetooth device for wireless personal area network communication Optional WebCam 1.3 megapixel digital camera. Trusted Platform Module The LifeBook S6510 has a Trusted Platform Module (TPM) installed for added system security. LifeBook Security/Application Panel Button Label Button Function...

  • Page 137: Device Ports

    On the LifeBook notebook: • PC Card slot for one Type I or Type II card: PCMCIA Standard 2.1 with CardBus support • Memory Stick/SD/xD Card slot • One 15-pin D-SUB connector for VGA external monitor (see Display specifications) • Three USB 2.0 (Universal Serial Bus) connectors for input/output devices •...

  • Page 138: Keyboard

    • One DC-in connector • One microphone In jack • One headphone jack • One Digital Video (DVI-D) 24-pin, female interface • One power/suspend/resume button with LED Keyboard Built-in keyboard with all functions of 101 key PS/2 compatible keyboards. • Total number of keys: 84 •...

  • Page 139: Power

    Batteries • Standard Lithium ion battery, rechargeable, 6-cell 10.8V, 5800 mAh, or, • Optional Flexible Bay battery: 6-cell Lithium ion battery, rechargeable, 10.8V, 2300 mAh AC Adapter Autosensing 100-240V AC, supplying 19V DC, 4.22A, 80W to the LifeBook notebook; includes an AC cable Power Management Conforms to ACPI (Advanced Configuration and Power Interface).

  • Page 140: Popular Accessories

    Altitude Operating: 10,000 feet (3,048 m) maximum Popular Accessories For ordering or additional information on Fujitsu accessories please visit our Web site at www.shopfujitsu.com or call 1-800-FUJITSU. Pre-Installed Software Depending on your pre-installed operating system, your notebook comes with pre-installed software for playing audio and video files of various formats.

  • Page 141: Learning About Your Software

    Learning About Your Software Tutorials All operating systems and most application software have tutorials built into them upon installation. We highly recommend that you step through the tutorial before you use an application. Manuals Included with your notebook you will find manuals for your installed operating system and other pre- installed software.
  • Page 142 Internet experience easier and more pleasant. Fujitsu Driver Update Utility The Fujitsu Driver Update (FDU) utility is pre-installed on your system. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. See “Automatically Downloading Driver Updates”...
  • Page 143 EverNote EverNote allows you to easily capture, store and access a variety of documents, such as typed and handwritten memos, webpage excerpts, emails, phone messages, addresses, passwords, sketches, and documents. Operating System Options Depending upon your system, one of the following operating system configurations will be installed: Microsoft Windows XP Professional Edition With Microsoft Office 60-day trial (Professional Edition 2007) Microsoft Windows Vista Business Edition...

  • Page 144: Glossary

    Glossary AC Adapter A device which converts the AC voltage from a wall outlet to the DC voltage needed to power your LifeBook notebook. Access point Wireless network device used to bridge wireless and wired network traffic. ACPI Advanced Configuration and Power Interface Active-Matrix Display A type of technology for making flat-panel displays which has a transistor or similar device for every pixel on the screen.
  • Page 145 ADSL Asymmetric Digital Subscriber Line. Technology for transporting high bit-rate services over ordinary phone lines. Accelerated Graphics Port. Graphics port specifically designed for graphics-intensive devices, such as video cards and 3D accelerators. Auto/Airline Adapter A device which converts the DC voltage from an automobile cigarette lighter or aircraft DC power outlet to the DC voltage needed to power your LifeBook notebook.
  • Page 146 An electrical circuit which passes data between the CPU and the sub-assemblies inside your LifeBook notebook. Byte 8 bits of parallel binary information. Cache Memory A block of memory built into the micro-processor which is much faster to access than your system RAM and used in specially structured ways to make your overall data handling time faster.
  • Page 147 COM Port Abbreviation for communication port. This is your serial interface connection. Command An instruction which you give your operating system. Example: run a particular application or format a floppy disk. Configuration The combination of hardware and software that makes up your system and how it is allocated for use. Cathode Ray Tube.
  • Page 148 DIMM Dual-in-line memory module. Disk A spinning platter of magnetic data storage media. If the platter is very stiff it is a hard drive, if it is highly flexible it is a floppy disk, if it is a floppy disk in a hard housing with a shutter it is commonly called a diskette.
  • Page 149 Disk Operating System (MS-DOS is a Microsoft Disk Operating System). Driver A computer program which converts application and operating system commands to external devices into the exact form required by a specific brand and model of device in order to produce the desired results from that particular equipment.
  • Page 150 Floppy Disk A spinning platter of magnetic data storage media which is highly flexible. Gigabyte. One billion bytes. Hard drive A spinning platter of magnetic data storage media where the platter is very stiff. Input/Output. Data entering and leaving your notebook in electronic form. I/O Port The connector and associated control circuits for data entering and leaving your notebook in electronic form.
  • Page 151 IEEE802.11g Wireless LAN standard that supports a maximum data rate of 54 Mbps. 802.11g devices operate in the 2.4 GHz ISM band. Infrared Light just beyond the red portion of the visible light spectrum which is invisible to humans. Infrastructure A name of a wireless LAN configuration.
  • Page 152 An abbreviation for infrared. IrDA Infrared Data Association. An organization which produces standards for communication using infrared as the carrier. Interrupt Request. An acronym for the hardware signal to the CPU that an external event has occurred which needs to be processed. Kilobyte.
  • Page 153 MAC Address Media Access Control Address. A unique physical address of a network card. For Ethernet, the first three bytes are used as the vendor code, controlled and assigned by IEEE. The remaining three bytes are controlled by each vendor (preventing overlap), therefore, every Ethernet card is given a unique physical address in the world, being assigned with a different address from other cards.
  • Page 154 Maximum Transmission Unit The maximum data size that can be transferred at a time through the Internet or other networks. You can set a smaller MTU size to obtain successful communication, if you have difficulty transferring data due to the fact that the maximum size is too large. Network key Data that is used for encrypting data in data communication.
  • Page 155 Partition A block of space on a hard drive which is set aside and made to appear to the operating system as if it were a separate disk, and addressed by the operating system accordingly. PCMCIA PCMCIA is a trademark of the Personal Computer Memory Card International Association. The Personal Computer Memory Card International Association is an organization that sets standards for add-in cards for personal computers.
  • Page 156 Program An integrated set of coded commands to your computers telling your hardware what to do and how and when to do it. Protocol Procedures and rules use to send and receive data between computers. - Method of sending and receiving data - Process used to handle communication errors Conditions required for communication are organized in procedures for correct transfer of information.
  • Page 157 Read Only Memory. A form of memory in which information is stored by physically altering the material. Data stored in this way can not be changed by your notebook and does not require power to maintain it. SDRAM Synchronous Dynamic Random Access Memory. Serial Port A connection to another device through which data is transferred one bit at a time on a single wire with any other wires only for control of the device not for transfer of data.
  • Page 158 A display which reports the condition of some portion of your hardware. On your LifeBook notebook this is an LCD screen just above the keyboard. Stereo (audio) A system using two channels to process sound from two different sources. Subnet mask TCP-IP network is controlled by being divided into multiple smaller networks (subnets).
  • Page 159 Thin Film Transistor – A technology for flat display panels which uses a thin film matrix of transistors to control each pixel of the display screen individually. Underwriters Laboratories – An independent organization that tests and certifies the electrical safety of devices.

  • Page 160: Regulatory Information

    Regulatory Information Notice Changes or modifications not expressly approved by Fujitsu could void this user’s authority to operate the equipment. FCC NOTICES Notice to Users of Radios and Television This equipment has been tested and found to comply with the limit for class B digital devices, pursuant to parts 15 of the FCC Rules.
  • Page 161 If trouble is experienced with this equipment, for repair or warranty information, please refer to the manual or contact Fujitsu Computer Systems Corporation, Customer Service. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
  • Page 162 to party line service is subject to state tariffs. (Contact the state public utility commission, public service commission or corporation commission for information). If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this computer does not disable your alarm equipment. If you have any questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
  • Page 163 Repairs to telecommunication equipment should be made by a Canadian authorized maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecommunication company cause to request the user to disconnect the equipment from the telephone line.
  • Page 164 Les réparations de l’équipement de télécommunications doivent être effectuées par un service de maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressément approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique.

  • Page 165: Appendix A: Wlan User's Guide

    Appendix A: WLAN User’s Guide FCC Regulatory Information Please note the following regulatory information related to the optional wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones.
  • Page 166 cables and equipment other than those specified by the manufacturer. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. The manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines.
  • Page 167 003 B / NMB 003 B. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorized by Fujitsu Computer Systems Corporation may invalidate the user's right to operate this equipment.

  • Page 168: Before Using The Optional Wireless Lan

    Before Using the Optional Wireless LAN This manual describes the procedures required to properly set up and configure the optional integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure it's correct operation. Keep this manual in a safe place for future reference.

  • Page 169: Wireless Lan Modes Using This Device

    Wireless LAN Modes Using this Device Ad Hoc Mode "Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer fashion. That is why Ad Hoc networks are also known as peer-to-peer networks.
  • Page 170 Access Point (Infrastructure) Mode Infrastructure mode refers to a wireless network architecture in which devices communicate with wireless or wired network devices by communicating through an Access Point. In infrastructure mode, wireless devices can communicate with each other or with a wired network. Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., file servers, printers, databases).

  • Page 171: Deactivating/Disconnecting The Wlan Device

    How to Handle This Device The WLAN device is an optional device that may come pre-installed in your mobile computer. Under normal circumstances, it should not be necessary for you to remove or re-install it. The Operating System that your mobile computer comes with has been pre-configured to support the WLAN device. •...

  • Page 172: Deactivation Using The Wireless On/Off Switch

    Deactivation Using the Wireless On/Off Switch The WLAN device can be deactivated quickly and efficiently by toggling the Wireless On/Off Switch to the Off position. The Wireless On/Off switch has no effect on non-Wireless LAN models. Wireless LAN On/Off Switch Location Disconnection Using the Icon in the Taskbar Note that disconnecting via the icon in the system tray does not turn off the radio;...

  • Page 173: Configuring The Wireless Lan

    Configuring the Wireless LAN The optional WLAN device can be configured to establish wireless network connectivity using the software that is built into Windows Vista. Support for most industry standard security solutions is contained in this software. Pre-defined parameters will be required for this procedure. Please consult with your network administrator for these parameters: Configuring the WLAN Using Windows Vista Click the Start button, then select Control Panel.

  • Page 174: Configuring The Wlan Using Windows Xp

    Procedure Click the Start button, then select Control Panel. If the Control Panel is not in Classic View, select Classic View from the left panel. Double-click the Network Connections icon. Select “New Connection” wizard. Click the [Next] button. Select “Connect to the Internet”, then click [Next]. Depending upon what type of connection you would like to make, make a selection.

  • Page 175: Troubleshooting The Wlan

    Troubleshooting the WLAN Troubleshooting Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. Problem Possible Cause Unavailable Incorrect network network name (SSID) or connection network key Weak received signal strength and/or link quality The WLAN device has been...
  • Page 176 Problem Possible Cause Unavailable The computer to be network connected is turned connection (continued) RF interference from Access Points or other wireless networks Wireless network authentication has failed Incorrectly configured network settings Incorrect IP address configuration 171 - Troubleshooting the WLAN Possible Solution Check if the computer to be connected is turned ON.

  • Page 177: Wlan Specifications

    WLAN Specifications Specifications Item Type of network Transfer rate Active frequency Typical operating distances** Number of channels Security Maximum recommended number of computers to be connected over wireless LAN (during ad hoc connection) * “Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees the interconnectivity of Specification The Intel PRO/Wireless 4965AGN Network Connections WLAN device conforms to IEEE 802.11a, 802.11b/g, and 802.11n (draft-compliant), Wi-Fi based*.
  • Page 178 wireless LAN (Wi-Fi Alliance) has been passed. ** The communication ranges shown above will increase or decrease depending on factors such as number of walls, reflective material, or interference from external RF sources. *** Encryption with network key (WEP) is performed using the above number of bits, however, users can set 40 bits/ 104 bits after subtracting the fixed length of 24 bits.

  • Page 179: Using The Bluetooth Device

    Using the Bluetooth Device The Integrated Bluetooth module (EYTF3CSFT) is an optional device available for Fujitsu mobile computers. What is Bluetooth Bluetooth technology is designed as a short-range wireless link between mobile devices, such as laptop computers, phones, printers, and cameras. Bluetooth technology is used to create Personal Area Networks (PANs) between devices in short-range of each other.
  • Page 180 Users are not authorized to modify this product. Any modifications invalidate the warranty. This equipment may not be modified, altered, or changed in any way without signed written permission from Fujitsu. Unauthorized modification will void the equipment authorization from the FCC and Industry Canada and the warranty.

  • Page 181: Appendix B: Fingerprint Sensor Device

    Appendix B: Fingerprint Sensor Device Introducing the Optional Fingerprint Sensor Device Your system may have an optional fingerprint sensor device below the Touchpad, between the left and right buttons. This also serves as a scroll button. FINGERPRINT SENSOR CAN BE USED FOR SCROLLING SENSOR THE SAME AS YOU WOULD USE A SCROLL BUTTON Figure 40.

  • Page 182: Getting Started

    • Log onto Windows • Resume from standby mode • Cancel a password-protected screen saver • Log into web sites that require a username and password After you have “enrolled” - or registered - your fingerprint, you can simply swipe your fingertip over the sensor for the system recognize you.
  • Page 183 • The Softex program group in the Programs group of the Start menu System Requirements The OmniPass application requires space on your hard drive; it also requires specific Operating Systems (OS’s). The minimum requirements are as follows: • Windows XP Professional operating system •...
  • Page 184 Verifying Information about OmniPass After you have completed installing OmniPass and restarted your system, you may wish to check the version of OmniPass on your system. To check the version information of OmniPass: From the Windows Desktop, double-click the key-shaped OmniPass icon in the taskbar (usually located in the lower right corner of the screen), Click the Start button, select Settings, and click Control Panel (if you are using Windows XP you will see the Control Panel directly in the Start menu;...

  • Page 185: User Enrollment

    Follow the directions to uninstall the OmniPass application. Once OmniPass has finished uninstalling, reboot your system when prompted. User Enrollment Before you can use any OmniPass features you must first enroll a user into OmniPass. Master Password Concept Computer resources are often protected with passwords. Whether you are logging into your computer, accessing your email, e-banking, paying bills online, or accessing network resources, you often have to supply credentials to gain access.
  • Page 186 HE ENROLLMENT PROCEDURE ASSUMES YOU HAVE NO HARDWARE AUTHENTICATION DEVICES OR ALTERNATE STORAGE LOCATIONS THAT YOU WISH TO INTEGRATE WITH SUCH FUNCTIONALITY Basic Enrollment The Enrollment Wizard will guide you through the process of enrolling a user. Unless you specified otherwise, after OmniPass installation the Enrollment Wizard will launch on Windows login.
  • Page 187 Enrolling a Fingerprint Enrolling a fingerprint will increase the security of your system and streamline the authentication procedure. You enroll fingerprints in the OmniPass Control Center. With an OmniPass user logged in, double-click the system tray OmniPass icon. Select the User Settings tab and click Enrollment under the User Settings area.

  • Page 188: Using Omnipass

    Using OmniPass You are now ready to begin using OmniPass. Used regularly, OmniPass will streamline your authentications. Password Replacement You will often use the password replacement function. When you go to a restricted access website (e.g., your bank, your web-based email, online auction or payment sites), you are always prompted to enter your login credentials.
  • Page 189 Remembering a Password OmniPass can remember any application, GUI, or password protected resource that has a password prompt. Using the following procedure, you can store a set of credentials into OmniPass. These credentials will then be linked to your “master password” or fingerprint. Go to a site that requires a login (username and password), but do not log in yet.
  • Page 190 HIS SETTING IS MORE CONVENIENT IN THAT WHENEVER YOU GO TO A SITE REMEMBERED WITH THIS SETTING YOU WILL BYPASS ANY AUTHENTICATION PROCEDURE AND GAIN INSTANT ACCESS TO THE SITE UT SHOULD YOU LEAVE YOUR SYSTEM UNATTENDED WITH YOUR ANYONE USING YOUR SYSTEM CAN BROWSE TO YOUR PASSWORD PROTECTED SITES AND GAIN AUTOMATIC ACCESS If you uncheck both boxes in Settings for this Password Site, OmniPass will prompt you for your master password or fingerprint authentication device.
  • Page 191 Logging into Windows with a Fingerprint Device When logging into Windows with a fingerprint device, the fingerprint capture window will now appear next to the Windows Login screen. Place your enrolled fingertip on the sensor to authenticate. You will be simultaneously logged into Windows and OmniPass. The capture window will also appear if you have used Ctrl-Alt-Del to lock a system, and the fingerprint device can be used to log back in as stated above.
  • Page 192 The two check boxes in Manage Passwords govern whether OmniPass prompts you to authenticate or directly logs you into the remembered site. OmniPass will overwrite an old set of credentials for a website if you attempt to use Remember Password on an already remembered site. The exception to the above rule is when resetting the Windows password.
  • Page 193 To set the default identity, highlight the identity you want as default and click [Set as Default]; click [Apply] to ensure the settings are saved. If you log in to OmniPass with a fingerprint device, you will automatically be logged in to the default identity for that OmniPass user. You can choose the identity with which you are logging in if you login using "master password".

  • Page 194: Configuring Omnipass

    This section gives an overview of both the Export/Import function and the OmniPass Control Center. Exporting and Importing Users OU CANNOT IMPORT A USER INTO ENROLLED IN Using OmniPass Control Center, you can export and import users in and out of OmniPass. The export process backs up all remembered sites, credentials, and enrolled fingerprints for an OmniPass user.
  • Page 195 protected. This user profile does NOT contain any of your encrypted data files. Importing an OmniPass User Profile To import an OmniPass user open the OmniPass Control Center, and click Import/Export User under Manage Users. Click Imports a new user into OmniPass and then select OmniPass Import/Export File (*.opi) and click Next.

  • Page 196: Omnipass Control Center

    This section will serve to explain functions within the OmniPass Control Center that weren’t explained earlier. You can access the OmniPass Control Center any of three ways: • Double-click the golden OmniPass key shaped icon in the Windows taskbar (typically in the lower- right corner of the desktop) •...
  • Page 197 User Settings The User Settings tab has four interfaces: Audio Settings, Taskbar Tips, and Enrollment. User settings allow users to customize OmniPass to suit their individual preferences. Under User Settings (Audio Settings and Taskbar Tips) you can set how OmniPass notifies the user of OmniPass events (e.g., successful login, access denied, etc.).

  • Page 198: Troubleshooting

    You cannot use OmniPass to create Windows users. You must first create the Windows user, and you will need administrative privileges to do that. Once the Windows user is created, you can add that user to OmniPass using the same username and password Cannot add Windows users to OmniPass If you experience difficulties adding a Windows user to OmniPass, you may need to adjust your local security settings.
  • Page 199 If you are having difficulties due to the first reason, you will need to update OmniPass with your changed Windows account password. Click Update Password and you will be prompted with a dialog to reconfirm your password. Enter the new password to your Windows user account and click OK. If the error persists, then it is unlikely the problem is due to your Windows user account password changing.

  • Page 200: Index

    Index About This Guide adapter indicator plug adapters Anti-theft lock slot Application Panel Auto/Airline Adapter Automatically Downloading Driver Updates Battery alarm care cold-swapping conserving power dead faulty increasing life level indicator lithium ion battery problems recharging replacing shorted Standby mode BIOS guide setup utility...
  • Page 201 OmniPass Flexible Bay cold-swapping devices eject lever installing Modular Multi-Format DVD Writer removing Fujitsu Contact Information Fujitsu Driver Update utility Fujitsu LifeBook storing traveling Function Key Hard Disk Drive access indicator problems Headphone Jack Hibernation Feature disable/enable...
  • Page 202 LAN (RJ-45) Jack LifeBook Security Application Panel buttons configuring deactivating deactivating and activating launching applications operating passwords uninstalling LifeBook Security/Application Panel Media Player care Control Panel loading removing Software using Memory capacity compartment installing problems removing upgrade module Memory Stick installing removing Microphone Jack...
  • Page 203 Pre-Installed Software Adobe Acrobat Reader Google Toolbar manuals Registration Restarting Restoring Your Pre-installed Software RJ-11 RJ-45 ScrLk SD Card installing removing SDRAM Secure Digital Card removing Security Panel Sleep Mode Specifications Audio Chipset Dimensions and Weight Environmental Requirements Keyboard Memory Microprocessor Power Video...

Table of Contents

Save PDF