hit counter script

Turning Off The Power - Sony VPLSW526M Operating Instructions Manual

User manual (vplsw536&526 operation)
Hide thumbs Also See for VPLSW526M:
Table of Contents

Advertisement

Displaying a pattern
You can display a pattern for adjusting the projected image or a grid pattern with the PATTERN
key on the remote commander. Press the PATTERN key again to restore the previous image.
You can use a grid pattern as a guide to write text or to draw lines and shapes on the whiteboard
or blackboard without using a computer.
Note
You cannot use this key when "Type A USB", "Type B USB" or "Network" is selected as the input.
Automatically adjusts Phase, Pitch and Shift of projected image while a
signal is input from a computer (APA (Auto Pixel Alignment))
Press the APA key on the remote commander. Press again to cancel adjusting during the setting.
You can also set APA in the Screen Menu (page 23). If Smart APA in the Function menu is set
to "On", executes APA automatically when a signal is input (page 26).

Turning Off the Power

1
Press the ?/1 key on the unit or the remote commander.
The projector starts shutdown and turns off. If you press the ?/1 key within 10 seconds
again, shutdown is cancelled.
2
Unplug the AC power cord from the wall outlet.
To turn off without displaying confirmation message
?/1
Press and hold the
ECO gauge
This gauge indicates the current effectiveness of the projector's ECO function. (For details on
the ECO function, see "ECO MODE key" (page 7) and "ECO" (page 28).)
The leaf icons are displayed when the projector is shut down. The number of displayed icons
varies according to how much energy is saved as a result of using the ECO function.
key on the unit for a few seconds (page 49).
ECO gauge
Projecting an Image
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vpl-sw536cVpl-sw526cVpl-sw536Vpl-sw526Vpl-sx536

Table of Contents