hit counter script
Sony FCB-EX490D Technical Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Security Camera
  5. FCBEX490D
  6. Technical manual

Sony FCB-EX490D Technical Manual

Color camera module
Hide thumbs Also See for FCB-EX490D:
Table of Contents

Advertisement

Quick Links

Download this manual
A-CQL-100-11(1)
Color Camera Module
Technical Manual
FCB-EX490D/EX490DP
 2007 Sony Corporation

Advertisement

Table of Contents
loading

Related Manuals for Sony FCB-EX490D

Summary of Contents for Sony FCB-EX490D

  • Page 1 A-CQL-100-11(1) Color Camera Module Technical Manual FCB-EX490D/EX490DP  2007 Sony Corporation...

  • Page 2: Table Of Contents

    Table of Contents Features ..............3 Precautions ..............4 Locations of Controls ..........5 Basic Functions ............6 Overview of Functions ..........6 Eclipse ..............19 Spectral Sensitivity Characteristics ......19 Vibration Specifications ..........19 Key Switch Circuitry ..........20 Key Function Specifications ........

  • Page 3: Features

    Overview Features • The EX-view HAD CCD features 380,000 (NTSC) or 440,000 (PAL) effective picture elements and high-sensitivity shooting. The minimum illumination required is 1.4 lux ( s (NTSC), s (PAL), ICR OFF). • Images with a wide dynamic range can be obtained using the CCD for shooting with a dynamic range and the LSI system.

  • Page 4: Precautions

    Overview Precautions In case of abnormal operation, contact your authorized Software Sony dealer or the store where you purchased the Use of the demonstration software developed by Sony product. Corporation or use of the software with customer developed application software may damage hardware, Phenomena specific to CCD image the application program or the camera.

  • Page 5: Locations Of Controls

    Locations of Controls Locations of Controls Front Left side Back Bottom 1 Lens 4 CN501 jack (for key SW) 7 Tripod screw hole 2 CN950 jack 5 TELE button When a tripod is used, please use 10 mm ( in.) screw to attach it 3 CN951 jack 6 WIDE button to the camera.

  • Page 6: Basic Functions

    Basic Functions Basic Functions In general Overview of Functions • Power On/Off Powers the camera on and off. When the power is off, VISCA commands are the basis of camera control. the camera is able to accept only the lowest level of VISCA Commands;...
  • Page 7 Basic Functions Zoom Focus The FCB camera employs a 18× optical zoom lens Focus has the following modes, all of which can be set combined with a digital zoom function; this camera using VISCA Commands. allows you to zoom up to 216×. •...

  • Page 8: White Balance

    Basic Functions • Bright White Balance Variable Iris and Gain (Close to F1.4, 17 steps at White Balance has the following modes, all of which 0 dB: F1.4, 15 steps from 0 to 28 dB) can be set using VISCA Commands. AE –...
  • Page 9 Basic Functions AE – Manual When switching from the Shutter Priority mode to the The shutter speed (22 steps), iris (18 steps) and gain Bright mode, the shutter speed set in the Shutter (16 steps) can be set freely by the user. Priority mode is maintained.

  • Page 10: Exposure Compensation

    Basic Functions Exposure Compensation Aperture Control Exposure compensation is a function which offsets the Aperture control is a function which adjusts the internal reference brightness level used in the AE enhancement of the edges of objects in the picture. mode, by steps of 1.5 dB. There are 16 levels of adjustment, starting from “no enhancement.”...
  • Page 11 Basic Functions Auto ICR Mode Effect Auto ICR Mode automatically switches the settings It consists of the following functions. needed for attaching or removing the IR Cut Filter. • Neg. Art: Negative/Positive Reversal With a set level of darkness, the IR Cut Filter is •...

  • Page 12: Title Display

    Basic Functions User Memory Area A user area of 16 bytes allows you to write data, such as an ID for each customer, data for each system, and so on, freely. Note Rewriting of memory is not unlimited. Be careful to avoid using the memory area for such as unnecessary tasks as rewriting the contents of the memory for every operation.
  • Page 13 Basic Functions Privacy Zone Masking Function Features • Mask can be set on up to 24 places according to Pan/ Privacy Zone masking protects private objects and Tilt positions. areas such as house windows, entrances, and exits • Mask can be displayed on 8 places per screen which are within the camera’s range of vision but not simultaneously.
  • Page 14 Basic Functions Privacy Zone Setting Command List Command Packet Command Set Command Comments CAM_PrivacyZone SetMask Setting Mask(Size) 8x 01 04 76 mm nn See “mm: Mask setting list”, “nn: Setting”, and 0r 0r 0s 0s FF “pp: x, qq:y, rr: w, ss: h” in “Parameters” on page 15.
  • Page 15 Basic Functions Parameters mm: Mask setting list nn:Setting Mask Name mm (Hex) Setting Mask Name mm (Hex) Mask_A Resetting the zone size (the value of w,h) Mask_M for the existing mask. Mask_B Mask_N Setting newly the zone size (the value of Mask_C Mask_O w,h).

  • Page 16: Details Of Setting Commands

    Basic Functions Comments: Two different color masks can be Details of Setting Commands chosen. Set Mask The colors can be chosen from among 14 colors Command: 8x 01 04 76 mm nn 0r 0r 0s 0s FF including the possibility for semi-transparency of Parameters: each color.

  • Page 17: Motion Detection Function

    Basic Functions Non Interlock Mask Motion Detection Function Command: 8x 01 04 6F mm 0p 0p 0q 0q 0r 0r 0s 0s This function instructs the camera to detect movement Parameters: within the monitoring area and then send an alarm signal automatically.
  • Page 18 Basic Functions • When multiple motions are detected or motion is Sending Alarms detected in another frame within the set interval • When motion is detected, the Alarm Replay following the original time the alarm was issued, command is issued via the serial command (VISCA) another alarm command is not issued.

  • Page 19: Eclipse

    Basic Functions Eclipse Vibration Specifications When designing the housing, refer to the dimensional allowance as shown in the figure below. Test Method (Random vibration) • Fix the camera at the four fixation points of the base using M2 screws. • Perform the random vibration test under the following conditions in the X, Y and Z directions for 20 minutes in each direction.

  • Page 20: Key Switch Circuitry

    For more information, refer to the command list, check functions on the camera, or contact your Sony dealer. a) The CN101 is connected to the CN501 on the FCB camera main unit.

  • Page 21: Key Function Specifications

    Basic Functions Key Function Specifications Classification Name Function Button operation Mode display ZOOM WIDE Move ZOOM to WIDE side quickly. Pressing repeatedly allowed. ZOOM bar displayed for 3 s. WIDE SLOW Move ZOOM to WIDE side slowly. Pressing repeatedly allowed. ZOOM bar displayed for 3 s.
  • Page 22 Basic Functions Classification Name Function Button operation Mode display FEATURE FREEZE Capture still image. Switch on/off. FREEZE indication Horizontal reversal Switch on/off. Horizontal reversal REVERSE indication BLACK & Black-and-white output Switch on/off. B&W display WHITE NEGA ART Negative art output Switch on/off.

  • Page 23: Initial Settings, Custom Preset And Backup

    Basic Functions Initial Settings, Custom Preset and Backup Initial settings for the various functions of the FCB camera are indicated in the “Initial settings” column. The “Custom preset” column indicates whether the custom preset function can be used to store the settings.
  • Page 24 Basic Functions Custom Back up Mode/Position setting Initial settings preset at standby Camera Memory Same as the initial value setting Display On/Off × × Mute On/Off Title Display On/Off Title Setting — Mask Setting — Mask Display On/Off Mask Color Setting —...

  • Page 25: Mode Condition

    Basic Functions...
  • Page 26 Basic Functions...
  • Page 27 Basic Functions...

  • Page 28: Command List

    SOFTWARE) AND SPECIFICALLY DISCLAIMS ANY LIABILITY FOR ANY SUCH MALFUNCTION OR DAMAGE. THIS CONTROL PROTOCOL AND COMMAND LIST SHOULD BE USED WITH CAUTION..............................................1)VISCA is a protocol which controls consumer camcorders developed by Sony. “VISCA” is a trademark of Sony Corporation.

  • Page 29: Visca Communication Specifications

    Command List VISCA Communication assigned address 2 is 82H. In the command list, as the header is 8X, input the address of the camera at X. The Specifications header of the reply packet from the camera assigned address 1 is 90H. The packet from the camera assigned VISCA packet structure address 2 is A0H.
  • Page 30 Command List Responses for commands and inquiries Command execution cancel ● ACK message To cancel a command which has already been sent, Returned by the FCB camera when it receives a send the Cancel command as the next command. To command.

  • Page 31: Visca Device Setting Command

    Inquiry Inquiry Packet Reply Packet Description CAM_VersionInq 8X 09 00 02 FF Y0 50 GG GG HH HH JJ JJ KK FF GGGG = Vender ID (0020: Sony) HHHH = Model ID 0448: FCB-EX490D 0449: FCB-EX490DP JJJJ = ROM revision...
  • Page 32 Command List VISCA Command/ACK Protocol Command Command Message Reply Message Comments General Command 81 01 04 38 02 FF 90 41 FF (ACK)+90 51 FF Returns ACK when a command has been accepted, and (Example) (Completion) Completion when a command has been executed. 90 42 FF 90 52 FF 81 01 04 38 FF...

  • Page 33: Error Messages

    Command List VISCA Camera-Issued Messages ACK/Completion Messages Comments Command Messages z0 4y FF Returned when the command is accepted. (y:Socket No.) Completion z0 5y FF Returned when the command has been executed. (y:Socket No.) z = Device address + 8 Error Messages Comments Command Messages...

  • Page 34: Fcb Camera Commands

    Command List FCB Camera Commands Command List (1/5) Command Set Command Command Packet Comments AddressSet Broadcast 88 30 01 FF Address setting IF_Clear Broadcast 88 01 00 01 FF I/F Clesr CommandCancel 8x 2p FF p: Socket No.(=1or2) CAM_Power 8x 01 04 00 02 FF Power ON/OFF 8x 01 04 00 03 FF CAM_Zoom...
  • Page 35 Command List Command List (2/5) Command Set Command Command Packet Comments CAM_WB Auto 8x 01 04 35 00 FF Normal Auto Indoor 8x 01 04 35 01 FF Indoor mode Outdoor 8x 01 04 35 02 FF Outdoor mode One Push WB 8x 01 04 35 03 FF One Push WB mode 8x 01 04 35 04 FF...
  • Page 36 Command List Command List (3/5) Command Set Command Command Packet Comments CAM_AE_Response DIRECT 8x 01 04 5D pp FF pp: 01 to 20 (hex) Default value: 01 CAM_SpotAE 8x 01 04 59 02 FF Spot Automatic Exposure Setting 8x 01 04 59 03 FF Position 8x 01 04 29 0p 0q 0r 0s FF pq: X (0 to F), rs: Y (0 to F)
  • Page 37 Command List Command List (4/5) Command Set Command Command Packet Comments CAM_Title Title Set1 8x 01 04 73 1L 00 nn pp L: Line Number, nn: H-position qq rr 00 00 00 00 00 FF pp: Color, qq: Blink rr: Opening Title Title Set2 8x 01 04 73 2L mm nn pp L: Line Number,...
  • Page 38 Command List Command List (5/5) Command Set Command Command Packet Comments CAM_MD 8x 01 04 1B 02 FF Motion Detection On/Off 8x 01 04 1B 03 FF Function Set 8x 01 04 1C 0m 0n 0p 0q 0r 0s FF m: Display mode n: Detection Frame Set (0 to F) pq: Threshold Level (00 to FF)
  • Page 39 Command List Inquiry Command List (1/3) Inquiry Command Command Packet Inquiry Packet Comments CAM_PowerInq 8x 09 04 00 FF y0 50 02 FF y0 50 03 FF CAM_ZoomPosInq 8x 09 04 47 FF y0 50 0p 0q 0r 0s FF pqrs: Zoom Position CAM_DZoomModeInq 8x 09 04 06 FF...
  • Page 40 Command List Inquiry Command List (2/3) Inquiry Command Command Packet Inquiry Packet Comments CAM_ApertureInq 8x 09 04 42 FF y0 50 00 00 0p 0q FF pq: Aperture Gain CAM_HRModeInq 8x 09 04 52 FF y0 50 02 FF On Hi-Resolution y0 50 03 FF CAM_LR_ReverseModeInq 8x 09 04 61 FF...
  • Page 41 Command List Inquiry Command List (3/3) Inquiry Command Command Packet Inquiry Packet Comments CAM_MDModeInq 8x 09 04 1B FF y0 50 02 FF y0 50 03 FF CAM_MDFunctionInq 8x 09 04 1C FF y0 50 0m 0n 0p 0q FF m: Display mode n: Detection Frame Set (0 to F) pq: Threshold Level (0 to FF)
  • Page 42 Command List Block Inquiry Command List Lens Control System Inquiry Commands ....Command Packet 8x 09 7E 7E 00 FF Byte Comments Byte Comments Byte Comments Destination Address Source Address Focus Near Limit (H) 0 Completion Message (50h) DZoomMode 0: Combine 1: Separate 0: Normal 1: Interval 2: Zoom Trigger...
  • Page 43 Command List Camera Control System Inquiry Commands ..Command Packet 8x 09 7E 7E 01 FF Byte Comments Byte Comments Byte Comments Destination Address Gain Position Source Address WB Mode 0 Completion Message (50h) Bright Position Aperture Gain Exposure Mode Exposure Comp.
  • Page 44 Command List Other Inquiry Commands ........Command Packet 8x 09 7E 7E 02 FF Byte Comments Byte Comments Byte Comments Destination Address External Lock 1: Provided 0: Not provided Memory 1: Provided 0: Not provided Source Address Clock 1: Provided 0: Not provided ICR 1: Provided 0: Not 0 Completion Message (50h)
  • Page 45 Command List Enlargement Function Query Command ....Command Packet 8x 09 7E 7E 03 FF Byte Comments Byte Comments Byte Comments Destination Address Advanced Privacy (1: AF Interval Time (H) Source Address Provided, 0: Not provided) Alarm (1: Provided, 0: Not provided) 0 Completion Message (50h) Picture flip (1: Provided, 0:...

  • Page 46: Visca Command Setting Values

    Command List VISCA Command Setting Values Exposure control (1/2) Gain 28 dB 26 dB NTSC (s) PAL (s) 24 dB Shutter Speed 1/10000 1/10000 22 dB 1/6000 1/6000 20 dB 1/4000 1/3500 18 dB 1/3000 1/2500 16 dB 1/2000 1/1750 14 dB 1/1500 1/1250...
  • Page 47 Command List Exposure control (2/2) Zoom Ratio and Zoom Position (for reference) IRIS GAIN Bright F1.4 28 dB Zoom Ratio Optical Zoom ×18 Lens Position Data F1.4 26 dB ×1 F1.4 24 dB 0000 ×2 F1.4 22 dB 1606 ×3 F1.4 20 dB 2151...

  • Page 48: Title Setting

    Command List Digital Zoom Separate mode Title setting Digital Zoom Digital Zoom Line number 00 to 0A Ratio Position Data H-position 00 to 17 ×1 00: Dose not blink ×2 Blink 01: Blinks ×4 White ×8 Yellow ×12 Violet Color Lens control Cyan Green...
  • Page 49 Command List Others AF Active Time* AF Interval Time* Spot AE X position Spot AE Y position R Gain B Gain Aperture Level 020C (NTSC) V-Phase 0270 (PAL) AE Response AutoICR ON t OFF Threshold Level MD Threshold Level MD Interval Time* MD Set Horizontal Position MD Set Vertical Position PrivacyZone X position...

  • Page 50: Specifications

    Specifications Specifications Picture elements FCB-EX490D: Approx. 380K FCB-EX490DP: 1/3 to pixels 1/10000 sec. (20 steps) FCB-EX490DP: Approx. 440K White balance AUTO, ATW, Indoor, Outdoor, pixels One Push WB, Manual WB Horizontal resolution Gain Auto/Manual (-3 to 28 dB, 16 steps) NTSC: 530 TV lines (WIDE end) Wide dynamic ON/OFF...

  • Page 51: Right Side

    Specifications Dimensions Front Right side 4-M2 Within a depth of 3 mm ( in.) or less form the side Left side 7-M2 Within a depth of 3 mm ( in.) or 2-M2 Within a depth of 3 mm ( in.) or less form the side less form the top surface Bottom Back...

  • Page 52: Pin Assignment

    Specifications CN951 Pin assignment KYOCERA ELCO Co. 00 6200 509 130 000+ Pin No. Name Level CMOS 5V (low: max 0.8V, high: min 2.0V) Read Data CMOS 5V (low: max 0.1V, high: min 4.4V) Send Data GND (for RxD&TxD) DC IN 9.0V±3V GND (for DC IN) VBS OUT...

This manual is also suitable for:

Fcb-ex490dp

Table of Contents