hit counter script
Toshiba Satellite L510 Series User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite L510 Series
  6. User manual

Toshiba Satellite L510 Series User Manual

User manual
Hide thumbs Also See for Satellite L510 Series:
Table of Contents

Advertisement

Quick Links

See also: Maintenance Manual
TOSHIBA
Satellite L510/
Satellite Pro L510 Series
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite L510 Series

Summary of Contents for Toshiba Satellite L510 Series

  • Page 1 TOSHIBA Satellite L510/ Satellite Pro L510 Series User’s Manual...
  • Page 2 © 2009 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior writ- ten permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

  • Page 3: Safety Instructions

    Safety instructions Use the following safety guidelines to help to protect yourself and your computer. When using your computer Do not operate your portable computer for an extended period of time with the base resting directly on your body. With extended operation, heat can potentially build up in the base.

  • Page 4: Fcc Information

    Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s external monitor port, USB port, and...
  • Page 5 Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causng Equipment Regulations.
  • Page 6 Spain ATAAB AN005,007,012, and ES01 Switzerland ATAAB AN002 All other countries/regions ATAAB AN003,004 Specific switch settings or software setup is required for each network, please refer to the relevant sections of the user guide for more details. The hookflash (timed break register recall) function is subject to separate national type approvals.
  • Page 7 User’s Manual...

  • Page 8: Type Of Service

    FCC. In the event repairs are ever needed on your modem, they should be performed by TOSHIBA Corporation or an authorized representative of TOSHIBA Corporation.

  • Page 9: Fax Branding

    Disconnection If you should ever decide to permanently disconnect your modem from its present line, please call the telephone company and let them know of this change. Fax branding The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of...
  • Page 10 The user manual of analog equipment must contain the equipment’s Ringer Equivalence Number (REN) and an explanation notice similar to the following: The Ringer Equivalence Number (REN) of the modem, which can vary. For the REN of your modem, refer to your modem’s label The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.
  • Page 11 Notes for use of this device in New Zealand ■ The grant of a Telepermit for a device in no way indicates Telecom acceptance of responsibility for the correct operation of that device under all operating conditions. In particular the higher speeds at which this modem is capable of operating depend on a specific network implementation which is only one of many ways of delivering high quality voice telephony to customers.

  • Page 12: General Conditions

    (b) caller identification information (which occurs between the first and second ring cadences) is not destroyed. ■ The preferred method of dialing is to use DTMF tones (ATDT...) as this is faster and more reliable than pulse (decadic) dialing. If for some reason you must use decadic dialing, your communications program must be set up to record numbers using the following translation table as this modem does not implement the New Zealand “Reverse Dialing”...
  • Page 13 For more detailed information about the collection and recycling programmes available in your country, please visit our website (http://eu.computers.toshiba-europe.com) or contact your local city office or the shop where you purchased the product. Disposal of Batteries and/or Accumulators The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste.
  • Page 14 ENERGY STAR logo on the computer and the following information applies. TOSHIBA is a partner in the Environmental Protection Agency’s (EPA) ® ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR ®...

  • Page 15: Optical Disc Drive Safety Instructions

    Optical disc drive standards TOSHIBA Satellite L510/Satellite Pro L510 series computer is shipped with one of the following drives preinstalled: DVD Super Multi (±R DL) drive or DVD Super Multi (±R DL) /w Label Flash drive. The drive has one of the following labels:...
  • Page 16 DVD Super Multi (±R DL) drive Panasonic Communications UJ890AD/UJ890ED Location of the required label COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. MANUFACTURED Panasonic Communications Co., Ltd. 1-62, 4-Chome Minoshima Hakata-ku Fukuoka, Japan Hitachi-LG Data Storage GT20N/GT20F Location of the required label COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.
  • Page 17 Toshiba Samsung Storage Technology TS-L633C/TS-L633Y Location of the required label PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR CHAPTER 1, SUBCHAPTER J, APPLICABLE AT THE DATE OF MANUFACTURE. MANUFACTURED Toshiba Samsung Storage Technology Korea Corporation...
  • Page 18 International precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.”...
  • Page 19 OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

  • Page 20: Table Of Contents

    Special features ......... . 1-9 TOSHIBA Value Added Package ......1-11 Utilities and applications .
  • Page 21 TOSHIBA Disc Creator ........4-11...
  • Page 22 Using the microphone ........4-20 Using the TOSHIBA Face Recognition ..... . . 4-20 Note on Use .
  • Page 23 Temporarily changing modes ......5-7 Generating ASCII characters ....... . 5-7 Power and Power-up Modes Chapter 6 Power conditions .
  • Page 24 Inserting a Memory Media ....... . 8-7 Removing a Memory Media ....... 8-7 Memory expansion .
  • Page 25 TOSHIBA support ........

  • Page 26: Preface

    Preface Congratulations on your purchase of the TOSHIBA Satellite L510/Satellite Pro L510 series computer. This powerful, lightweight notebook computer is designed to provide years of reliable, high-performance computing. This manual tells you how to set up and begin using your Satellite L510/Satellite Pro L510 series computer.
  • Page 27 Preface Chapter 7, HW Setup and Passwords, explains how to configure the computer using the HW Setup program. It also tells how to set a password. Chapter 8, Optional Devices, describes the optional hardware available. Chapter 9, Troubleshooting, provides helpful information on how to perform some diagnostic tests, and suggests courses of action if the computer doesn’t seem to be working properly.
  • Page 28 Preface Display Names of windows or icons or text generated by the computer that appear on its display screen are presented in the typeface you see to the left. Messages Messages are used in this manual to bring important information to your attention.

  • Page 29: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
  • Page 30 General Precautions ■ Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters. ■ Extreme heat, cold, or humidity. ■ Liquids and corrosive chemicals. Stress injury Carefully read the Instruction Manual for Safety and Comfort. It contains information on the prevention of stress injuries to your hands and wrists that can be caused by extensive keyboard use.

  • Page 31: Instruction Manual For Safety And Comfort

    General Precautions Mobile phones Please be aware that the use of mobile phones can interfere with the audio system. The operation of the computer will not be impaired in any way, but it is recommended that a minimum distance of 30cm is maintained between the computer and a mobile phone that is in use.

  • Page 32: Equipment Checklist

    Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packaging materials for future use.

  • Page 33: Software

    TOSHIBA Value Added Package ■ TOSHIBA eco Utility SD Memory Card Format Utility and other SD functions are packaged into TOSHIBA SD Memory Utilities. When uninstalling the SD utilities, click Start Control Panel Uninstall a program, and select TOSHIBA SD →...

  • Page 34: Features

    Built-in Your computer is equipped with one processor and processor type varies depending on model. To check which type of processor is included in your model, open the TOSHIBA PC Diagnostic Tool Utility by clicking Start All Programs → →...

  • Page 35: Disks

    Introduction Disks Hard disk drive The computer is equipped with a Hard Disk Drive (HDD)*4 (HDD) for nonvolatile storage of data and software. (Depending on the model you purchased) It comes in the following sizes. ■ 160 GB ■ 250 GB ■...
  • Page 36 Introduction DVD Super Multi (±R Some models are equipped with a full-size DVD DL) drive Super Multi (±R DL) drive module that allows you to record data to rewritable CD/DVDs as well as run CD/DVDs without using an adapter. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed.

  • Page 37: Keyboard

    Introduction Keyboard ® Built-in 86 keys or 87 keys, compatible with IBM enhanced keyboard, embedded numeric overlay, dedicated cursor control, keys. See Chapter 5, Keyboard, for details. Pointing device Built-in A touchpad and control buttons in the palm rest enable control of the on-screen pointer. Power The computer is powered by one rechargeable Battery...

  • Page 38: Slots

    Introduction Slots Bridge media card slot This slot allows you to easily transfer data from devices, such as digital cameras and Personal Digital Assistants, that use flash memory Secure Digital(SD)/Secure Digital High Capacity(SDHC)/ Memory Stick(MS)/Memory Stick Pro(MS Pro)/MultiMediaCard(MMC). See Chapter 8, Optional Devices, for details.

  • Page 39: Security

    Operating system Windows 7 is available. Refer to the preinstalled Software section at the front of this chapter. TOSHIBA Utilities A number of utilities and drivers are preinstalled to make your computer more convenient to use. Refer to the Utilities and applications section in this chapter.

  • Page 40: Special Features

    Introduction Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. To access the Power Options, click Start → Control Panel → System and Security → Power Options.
  • Page 41 Data is maintained in the computer’s main memory. When you turn on the power again, you can continue working right where you left off. TOSHIBA PC Health The TOSHIBA PC Health Monitor software Monitor program monitors computer system functions such as power consumption, the cooling system and HDD/SSD status.

  • Page 42: Toshiba Value Added Package

    Introduction TOSHIBA Value Added Package This section describes the TOSHIBA Component features preinstalled on the computer. TOSHIBA Power TOSHIBA Power Saver provides you with the Saver features of more various power supply managements. TOSHIBA Button This utility controls the following computer button Support functions.

  • Page 43: Utilities And Applications

    You can edit digital video and make a DVD-Video MovieFactory for and support Labelflash function. TOSHIBA TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication devices and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks.
  • Page 44 This has the same function as the Lock button at the bottom of the right pane in the start menu. ■ TOSHIBA Assist: This can be used to open TOSHIBA Assist if it is already installed in your computer. TOSHIBA HDD/SSD...

  • Page 45: Options

    Battery Pack An additional battery pack 6 cell type and 12 cell type can be purchased from your TOSHIBA dealer. The battery pack is identical to the one that came with your computer. Use it as a spare or replacement.

  • Page 46: Chapter 2 The Grand Tour

    Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed Figure 2-1 shows the computer’s front with its display panel in the closed position.
  • Page 47 The Grand Tour Bridge media card slot This slot allows you to easily transfer data from devices, such as digital camera and PDA, that use flash memory (Secure Digital(SD)/Secure Digital High Capacity(SDHC)/Memory Stick(MS)/Memory Stick Pro(MS Pro)/MultiMediaCard(MMC)). Use this dial to adjust the volume of the system Volume control speaker and headphones.

  • Page 48: Left Side

    The Grand Tour Left side Figure 2-2 shows the computer’s left side. 1.LAN JACK 2.HDMI PORT XPRESS ARD SLOT EADPHONE JACK ICROPHONE JACK 6.eSATA/USB COMBO PORT XTERNAL MONITOR PORT AN VENT ECURITY LOCK SLOT EPENDING ON THE MODEL YOU PURCHASED Figure 2-2 The left side of the computer LAN jack This jack allows you connect to a LAN.
  • Page 49 The Grand Tour Headphone jack A standard 3.5 mm mini headphone jack enables connection of a stereo headphone (16 ohm minimum) or other device for audio output. When you connect headphones, the internal speaker is automatically disabled. Microphone jack A standard 3.5 mm mini microphone jack enables connection of a microphone or other device for audio input.

  • Page 50: Right Side

    The Grand Tour Right side Figure 2-3 shows the computer’s right side. ODEM JACK 2.DC IN 19V 3.USB PORTS PTICAL DISC DRIVE EPENDING ON THE MODEL YOU PURCHASED Figure 2-3 The right side of the computer Modem jack In areas where an internal modem is installed as standard equipment, there is a modem jack that allows you to use a modular cable to connect the modem directly to a telephone line.

  • Page 51: Back Side

    The Grand Tour Back side Figure 2-4 shows the computer’s back side. Figure 2-4 The computer’s back side Underside Figure 2-5 shows the underside of the computer. Make sure the display is closed before turning over your computer. ATTEER PACK LOCK EMORY MODULE COVER ATTERY PACK ATTERY RELEASE LATCH...
  • Page 52 Chapter 6, Power and Power-up Modes, describes how to access the battery pack. Additional battery packs can be purchased from your TOSHIBA dealer to extend the computer’s battery operating time. Battery release latch Slide this latch to release the battery pack.

  • Page 53: Front With The Display Open

    The Grand Tour Front with the display open Figure 2-6 shows the front of the computer with the display open. To open the display, lift the display up and position the display at a comfortable viewing angle. UILT IN MICROPHONE OUCHPAD OWER BUTTON ISPLAY SCREEN...

  • Page 54: Function Button

    The Grand Tour Stereo speaker The speaker emits sound generated by your software as well as audio alarms, such as low battery condition, generated by the system. Function button Four buttons allow you to manage audio/video, run applications and access utilities. Details are in the Function button section.

  • Page 55: System Indicators

    The Grand Tour Press this button to begin playing an audio CD, a Play/Pause button DVD movie or digital audio files. This button also acts as a Pause button. Previous button Press this button to advance to the previous track, chapter or data. Next button Press this button to advance to the next track, chapter or data.

  • Page 56: Keyboard Indicators

    The Grand Tour Bridge media card The Bridge media card indicator glows green when the computer is accessing the bridge media card. HDD/ODD/eSATA The HDD/ODD/eSATA indicator glows green when the computer is accessing a hard disk drive, optical disc drive or eSATA-equipped device.

  • Page 57: Optical Disc Drive

    Writable discs This section describes the types of writable CD/DVD discs. Check the specifications for your drive to for the type of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Refer to Chapter 4, Operating Basics ■...

  • Page 58: Dvd Super Multi (±R Dl) Drive

    The Grand Tour DVD Super Multi (±R DL) drive The full-size DVD Super Multi drive (±R DL) module allows you to record data to rewritable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adapter. The read speed is slower at the center of a disc and faster at the outer edge.

  • Page 59: Ac Adapter

    Always use the TOSHIBA AC adapter that was included with your computer, or use AC adapters specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adapter could cause fire or damage to the computer possibly resulting in serious injury.

  • Page 60: Chapter 3 Getting Started

    Chapter 3 Getting Started This chapter provides basic information to start using your computer. It covers the following topics: Be sure to read the enclosed Instruction Manual for Safety and Comfort for information on the safe and proper use of this computer. It is intended to help you be more comfortable and productive while using a notebook computer.

  • Page 61: Connecting The Ac Adapter

    ■ Always use the TOSHIBA AC adapter that was included with your computer or use AC adapters specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adapter could cause fire or damage to the computer possibly resulting in serious injury.

  • Page 62: Opening The Display

    Getting Started 1. Connect the power cord to the AC adapter. Figure 3-1 Connecting the power cord to the AC adapter 2. Connect the AC adapter’s DC output plug to the DC IN 19V jack on the right side of the computer. 1.DC IN JACK Figure 3-2 Connecting the adapter to the computer...

  • Page 63: Turning On The Power

    Getting Started Figure 3-3 Opening the display panel ■ When opening the panel, please be careful not to force it beyond the point where it moves easily. ■ Be careful not to open the display panel too far as this could put stress on the display panel’s hinges and cause damage.

  • Page 64: Starting Up For The First Time

    Getting Started Press and hold the computer’s power button for two or three seconds. OWER BUTTON Figure 3-4 Turning on the power Starting up for the first time When you first turn on the power, the computer’s initial screen is the Windows 7 Startup Screen Logo.

  • Page 65: Hibernation Mode

    Getting Started Hibernation mode The hibernation feature saves the contents of memory to the hard disk when the computer is turned off. The next time the computer is turned on, the previous state is restored. The hibernation feature does not save the status of peripheral devices.

  • Page 66: Sleep Mode

    Getting Started You can also enable hibernation mode by pressing FN + F4 - please refer to Chapter 5, Keyboard, for further details. Data save in hibernation mode When you turn off the power in hibernation mode, the computer takes a moment to save current memory data to the hard disk.

  • Page 67: Restarting The Computer

    Getting Started Executing sleep mode You can also enable sleep mode by pressing FN + F3. See Chapter 5, Keyboard for details. You can enter sleep mode in one of three ways: Click Windows Start button, point to , and then click Sleep. Close the display panel.

  • Page 68: System Recovery Options

    Getting Started System recovery options A hidden partition is allocated on the hard disk drive for the system recovery options. This partition stores files which can be used to repair the system in the event of a problem. System recovery options The system recovery options feature is installed on the hard disk when shipped from the factory.

  • Page 69: Restoring The Preinstalled Software From Your Creating Recovery Media

    Load the Recovery Media in the optional optical disc drive and turn off the computer's power. Hold down the F12 key and turn on the power. When TOSHIBA Lead- ing Innovation>>> appears, release the F12 key. Use the up or down cursor key to select CD/DVD in the display menu.

  • Page 70: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter gives information on basic operations including using the touchpad, optical disc drives, Audio/Video controls, the web camera, the microphone, the internal modem, wireless communication and LAN. It also provides tips on caring for your computer, diskettes and CD/DVD. Using the touchpad To use the touchpad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.

  • Page 71: Touch Pad Gesture

    Operating Basics OUCHPAD OUCHPAD CONTROL BUTTONS Figure 4-1 Touchpad and touchpad control buttons Touch Pad Gesture There are four convenient gestures that make users operate the system easier and faster. ChiralMotion You can scroll vertically and horizontally. To enable these features, select the Enable vertical scrolling and Enable horizontal scrolling check boxes.

  • Page 72: Using Optical Disc Drives

    CD/DVD without an adapter. When the computer is accessing a CD/DVD, an indicator on the drive glows. Use the TOSHIBA DVD PLAYER application to view DVD-Video discs. Please also refer to the Writing CD/DVDs on DVD Super Multi (±R DL) drive section for precautions on writing to CD/DVDs.
  • Page 73 Operating Basics b. Pressing the eject button will not open the drawer when the drive’s power is off. If the power is off, you can open the drawer by insert- ing a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
  • Page 74 Operating Basics Lay the CD/DVD with the label side up in the drawer. Figure 4-5 Inserting a CD/DVD When the drawer is fully opened, the edge of the computer will extend slightly over the CD/DVD tray. Therefore, you will need to turn the CD/DVD at an angle when you place it in the tray.

  • Page 75: Removing Discs

    Operating Basics Figure 4-6 Closing the drawer Removing discs To remove the CD/DVD, follow the steps below and refer to below figure. Do not press the eject button while the computer is accessing the drive. Wait for the optical disc drive indicator to go out before you open the drawer.

  • Page 76: Function Button

    CD-R/-RW or DVD-R/- RW/+R/+RW/-RAM/+R DL/-R DL discs. The following applications for writing are supplied: TOSHIBA Disc Creator and Corel DVD MovieFactory for TOSHIBA, which is a product of Corel Corporations. Important message (DVD Super Multi (±R DL) drive)
  • Page 77 Operating Basics CD-R: TAIYO YUDEN CO., LTD. MITSUBISHI KAGAKU MEDIA CO., LTD. HITACHI MAXELL, LTD CD-RW: (Multi-Speed and High-Speed) MITSUBISHI KAGAKU MEDIA CO., LTD. CD-RW: (Ultra-Speed) MITSUBISHI KAGAKU MEDIA CO., LTD. DVD-R: DVD Specifications for DVD-R Disc for General Version 2.0 TAIYO YUDEN CO., LTD.
  • Page 78 Operating Basics DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2.4x, 4x and 8x speed media DVD-RAM: DVD Specifications for DVD-RAM Disc for Version 2.0, 2.1 or 2.2 Panasonic CO., LTD. (for 3x and 5x speed media) HITACHI MAXELL, LTD. (for 3x and 5x speed media) This DVD Super Multi (±R DL) drive cannot use discs that allow writing faster than 16x speed (DVD-R and DVD+R media), 8x speed DVD-R DL, DVD+RW and DVD+R DL media, 6x speed (DVD-RW media) and 5x...

  • Page 79: When Writing Or Rewriting

    Write from the computer’s HDD to the CD/DVD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator is not recommended. When writing or rewriting Please observe/consider the following when you write or rewrite to a CD- R/-RW, DVD-R/-R DL/-RW/-RAM or DVD+R/+R DL/+RW disc.

  • Page 80: Disclaimer (Dvd Super Multi (±R Dl) Drive)

    DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL or DVD+RW media. ■ Do not use the 'Disc Backup' function of TOSHIBA Disc Creator in order to copy DVD Video or DVD-ROM material that has copyright protection. ■ DVD-RAM discs cannot be backed up using the 'Disc Backup' functionof TOSHIBA Disc Creator.

  • Page 81: Data Verification

    Windows 2000, you will need Service Pack 2. In addition to this, some DVD-ROM and DVD-ROM/CD-RW drives cannot read this added data regardless of the operating system. ■ TOSHIBA Disc Creator does not support recording to DVD-RAM discs - to achieve this you should use Windows Explorer or another similar utility. ■...

  • Page 82: Important Information For Use

    Operating Basics Insert a Labelflash disc in DVD drive. Set PRINTING SIDE for underside. Click Start All Programs DVD MovieFactory for TOSHIBA → → → DVD MovieFactory Launcher to launch DVD MovieFactory. Click Create Disc Label. Corel Label@Once is started.
  • Page 83 DVD-R/+R/-RW/-RAM discs. ■ When playing your recorded disc on your computer, please use TOSHIBA DVD PLAYER software application. ■ If you use an over-used rewritable disc, the full formatting might be locked. Please use a brand new disc.

  • Page 84: Toshiba Dvd Player

    Operating Basics TOSHIBA DVD PLAYER Please be aware of the following limitations when you use the TOSHIBA DVD PLAYER. Notes on Use ■ Frame dropping, audio skipping or out of synch audio and video may occur during playback of some DVD Video titles.

  • Page 85: Media Care

    Operating Basics Media care This section provides tips on protecting data stored on your CD/DVD. Handle your media with care. The following simple precautions will increase the lifetime of your media and protect the data stored on them: CD/DVD Store your CD/DVD in the container they came in to protect them and keep them clean.

  • Page 86: Realtek Hd Audio Manager

    Operating Basics Realtek HD Audio Manager You can confirm and change the audio configuration using the Realtek HD Audio Manager. To launch the Realtek HD Audio Manager, click Start → Control Panel → Hardware and Sound → Realtek HD Audio Manager. When you first launch the Realtek HD Audio Manager, you will see following device tabs.

  • Page 87: Using The Web Camera

    Operating Basics Using the web camera Built-in web camera is provided with some models. This section describes the bundled webcam utility, which can capture still and video images. The web camera will auto-run when Windows starts. Please unstick the protective plastic-film before using the web camera. UILT IN MICROPHONE EB CAMERA LENS...

  • Page 88: Using Toshiba Web Camera Application

    Operating Basics Using TOSHIBA Web Camera Application TOSHIBA Web Camera Application is pre-configured to start when you turn on Windows 7; if you need to restart it go to Start → All Programs → TOSHIBA → Utilities → Web Camera Application.

  • Page 89: Using The Microphone

    Master Volume panel. Using the TOSHIBA Face Recognition TOSHIBA Face Recognition uses a face verification library to verify the face data of users when they log in to Windows. The user can thus avoid having to enter a password or the like, which makes the login process easier.

  • Page 90: Disclaimer

    TOSHIBA does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the face recognition software or utility.

  • Page 91: How To Delete The Face Recognition Data

    To delete the Face Recognition Data, follow the steps as described below: 1. To launch this utility, click Start → All Programs → TOSHIBA → Utilities → Face Recognition. The Management screen is displayed. 2. Select a user which is deleted in the Management screen.

  • Page 92: Modem

    Operating Basics 1:N Mode Login screen Turn on the computer. The Select Tiles screen will be displayed. Select Start face recognition. “Please face the camera” will be displayed. Verification will be performed. If the authentication is successful, the image data taken in step 4 will be faded in and placed over one another.

  • Page 93: Region Selection

    To select a region, follow the steps below. In Windows 7, click Start, point to All Programs, point to TOSHIBA, point to Networking and click Modem Region Select. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.

  • Page 94: Connecting

    Operating Basics Setting You can enable or disable the following settings: AutoRun Mode The Region Select utility starts automatically when you start up the operating system. Open the Dialing Properties dialog box after selecting region. The dialing properties dialog box will be displayed automatically after you select the region.

  • Page 95: Disconnecting

    Operating Basics Do not pull on the cable or move the computer while the cable is connected. Disconnecting To disconnect the internal modem cable, follow the steps below. Pinch the lever on the connector in the telephone jack and pull out the connector.

  • Page 96: Bluetooth Tm Wireless Technology

    TOSHIBA strongly recommends the customer to enable the encryption function. ■ TOSHIBA is not liable for the eavesdropping of data due to the use of Wireless LAN and the damage thereof. Bluetooth wireless technology...

  • Page 97: Lan

    Operating Basics Indicator status Indication Wireless communication hot key is set to off. Indicator off Wireless communication hot key is on. Indicator glows Wireless LAN or Bluetooth is turned on by an application. If you used the Task Bar to disable Wireless LAN, restart the computer or follow the procedures below to enable the system to recognize Wireless LAN.

  • Page 98: Disconnecting Lan Cable

    Operating Basics Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place. 1.LAN JACK Figure 4-14 Connecting the LAN cable Plug the other end of the cable into a LAN hub connector. Check with your LAN administrator before connecting to a hub.

  • Page 99: Moving The Computer

    Operating Basics Moving the computer The computer is designed for rugged durability. However, a few simple precautions taken when moving the computer will help ensure trouble-free operation. ■ Make sure all disk activities are terminated before moving the computer. Check if the HDD/ODD/eSATA indicator and external device indicator are off.

  • Page 100: Chapter 5 The Keyboard

    Chapter 5 The Keyboard The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. Keyboards for numerous languages are available. There are five types of keys: typewriter keys, function keys, soft keys, Windows special keys and keypad overlay.

  • Page 101: Function Keys: F1

    Soft keys: FN key combinations The FN (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.

  • Page 102: Hot Keys

    The Keyboard Press FN + F12 (Scroll Lock) to lock the cursor on a specific line. The power on default is off. Press FN + ENTER to simulate ENTER on the enhanced keyboard’s numeric keypad. Press FN + CTRL to simulate the enhanced keyboard’s right CTRL key.
  • Page 103 The Keyboard Pressing FN + F4 switches the system to Hibernate hibernation mode. Pressing FN + F5 changes the active display Output device. Pressing FN + F6 decreases the computer’s Brightness down display panel brightness in individual steps. Pressing FN + F7 increases the computer’s Brightness up display panel brightness in individual steps.

  • Page 104: Fn Sticky Key

    (enlarge) supported application windows. FN sticky key You can use the TOSHIBA Accessibility Utility to make the FN key sticky, that is, you can press it once, release it, and they press an “F number” key. To start the TOSHIBA Accessibility Utility, click Start → All Programs →...

  • Page 105: Turning On The Overlays

    The Keyboard Turning on the overlays The numeric keypad overlay can be used for numeric data input or cursor and page control. Arrow mode To turn on the Arrow mode, press FN + F10. The Arrow mode indicator lights. Now try cursor and page control using the keys shown in figure 5-1. Press FN + F10 again to turn off the overlay.

  • Page 106: Temporarily Using Overlay (Overlay Off)

    The Keyboard Temporarily using overlay (overlay off) While using the normal keyboard, you can temporarily use the keypad overlay without turning it on: Press and hold down FN. Check the keyboard indicators. Pressing FN turns on the most recently used overlay. If the Numeric mode indicator lights, you can use the overlay for numeric entry.

  • Page 107: Chapter 6 Power And Power-Up Modes

    Chapter 6 Power and Power-up Modes The computer’s power resources include the AC adapter and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power-up modes. Power conditions The computer’s operating capability and battery charge status are affected by the power conditions: whether an AC adapter is connected, whether a...

  • Page 108: Power Indicators

    DC IN off Battery charge is Computer goes into exhausted hibernation or shuts down (depending on the TOSHIBA power Management Utility Setting) No battery • No operation installed •LED: Battery off DC IN off Power indicators The Battery, DC IN and Power indicators on the system indicator panel alert you to the computer’s operating capability and battery charge status.

  • Page 109: Dc In Indicator

    Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. The battery recharges the RTC batteries. The battery maintains the state of the computer when you enable Resume.

  • Page 110: Real Time Clock Battery

    <F2> to setup The computer’s RTC battery is a lithium battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations Care and use of the battery pack The battery pack is a vital component of portable computing.

  • Page 111: Safety Precautions

    Power and Power-up Modes Safety precautions Mishandling of batteries can cause death, serious injury or property damage. Carefully observe the following advisories: Danger: Indicates an imminently hazardous situation, Which could result in death or serious injury, if you do not follow instructions. Warning: Indicates a potentially hazardous situation, Which could result in death or serious injury, if you do not follow instructions.
  • Page 112 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the bat- tery pack might rupture. Make sure the battery is securely installed in the computer before attempting to charge the battery pack.

  • Page 113: Charging The Batteries

    The Battery indicator glows orange when the battery is being charged. Use only the computer connected to an AC power source or the optional TOSHIBA Batteries charger to charge the battery pack. Never attempt to charge the battery pack with any other charger.

  • Page 114: Monitoring Battery Capacity

    Power and Power-up Modes The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the computer. If you make heavy use of external devices, for example, the battery might scarcely charge at all during operation. Refer also to the section Maximizing battery operating time.

  • Page 115: Maximizing Battery Operating Time

    Power and Power-up Modes Maximizing battery operating time A battery’s usefulness depends on how long it can supply power on a single charge. How long the charge lasts in a battery depends on: ■ How you configure the computer (for example, whether you enable battery-power saving options).

  • Page 116: Extending Battery Life

    Power and Power-up Modes Extending battery life To maximize the life of your battery packs: ■ At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges. Before doing so, follow the steps below.

  • Page 117: Removing The Battery Pack

    Power and Power-up Modes Removing the battery pack To remove a discharged battery, follow the steps as detailed below: ■ When handling battery pack, be careful not to short circuit the terminals. Also do not drop, hit or otherwise apply impact; do not scratch or break the casing and do not twist or bend the battery pack.

  • Page 118: Installing The Battery Pack

    7. Pull the battery pack forward to remove it. For environmental reasons, do not throw away a spent battery pack. Please return spent battery pack to your TOSHIBA dealer. Installing the battery pack To install a battery pack, follow the steps below.

  • Page 119: Starting The Computer By Password

    Power and Power-up Modes Starting the computer by password If you have already registered a password, please enter the password manually to start the computer: To start up the computer with the user password, follow these steps: Turn on the power as described in Chapter 3, Getting Started.

  • Page 120: Chapter 7 Hw Setup And Passwords

    TOSHIBA HW Setup allows you to configure settings for General, Password, Display, Boot Priority, Keyboard, USB and LAN. If the supervisor password is set, access to the TOSHIBA HW Setup program can be prevented when the user password is used to log on to the computer.

  • Page 121: User Password

    HW Setup and Passwords General This window displays the BIOS version and contains two buttons: Default and About. Default Returns all HW Setup values to the factory settings. About Displays the HW Setup version. Setup This field displays the installed BIOS version and date. Password User Password This option allows you to set or reset the user password for power on.

  • Page 122: Power On Display

    HW Setup and Passwords Click the OK button. If the character string you enter matches the reg- istered password, the password option is reset and the display changes to: Not registered If they do not match, the following message appears. You must repeat step 1.

  • Page 123: Boot Priority

    HW Setup and Passwords Boot Priority Boot Priority Options This option sets the priority for booting the computer. The Boot Priority Options setting will be like the following. You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting: Selects the USB diskette drive.
  • Page 124 HW Setup and Passwords ■ If a supervisor password is set, the menu above does not appear when you use the user password to start the computer. ■ The selection method above does not change the boot priority settings in HW Setup. ■...

  • Page 125: Wireless Communication Switch

    HW Setup and Passwords Do not install or remove an optional memory module while Wake-up on LAN is enabled. Wake-up on LAN does not work without the AC adapter. Leave it connected, if you are using this feature. Built-in LAN Enabled Enables built-in LAN functions.

  • Page 126: Chapter 8 Optional Devices

    Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility. The following optional devices are available from your TOSHIBA dealer: Cards/Memory ■ ExpressCard ■ Memory cards: Secure Digital(SD), Secure Digital High Capacity(SDHC), Memory Stick(MS), Memory Stick Pro(MS Pro), and MultiMediaCard(MMC).

  • Page 127: Expresscard

    Optional Devices ExpressCard Installing an ExpressCard The ExpressCard slot is located on the left side of the computer. You can install one ExpressCard in the slot. Windows’ hot-install feature allows you to install ExpressCard while the computer’s power is on. Do not install an ExpressCard while the computer is in sleep or hibernation mode.

  • Page 128: Removing An Expresscard

    Optional Devices Insert the ExpressCard. Press gently to ensure a firm connection. Check the configuration in the HW Setup window to make sure it is appropriate for your card. XPRESS XPRESS ’ HE CARD S SHAPE DEPENDS ON THE CARD YOU PURCHASED Figure 8-3 Inserting the ExpressCard Removing an ExpressCard To remove the ExpressCard, follow the steps below.

  • Page 129: Bridge Media Slot

    Optional Devices Bridge Media Slot The computer is equipped with a Bridge media slot that can accommodatesome kinds of memory media with various memory capacities so that you can easily transfer data from devices, such as digital cameras and Personal Digital Assistants. Keep foreign objects out of the Bridge media slot.

  • Page 130: Memory Media

    SD/SDHC memory cards are sold already formatted in conformity to specific standards. If you format the SD/SDHC memory card again, be sure to format it with the TOSHIBA SD Memory Card Format utility, not with the format command provided within Windows.

  • Page 131: Media Care

    Optional Devices Media Care Observe the following precautions when handling the card. Card Care ■ Do not twist or bend cards. ■ Do not expose cards to liquids or store in humid areas or lay media close to containers of liquid. ■...

  • Page 132: Inserting A Memory Media

    Optional Devices Inserting a Memory Media The following instructions apply to all types of supported media devices. To insert a memory media, follow the steps as detailed below: Insert the memory card. Press gently to ensure a firm connection. RIDGE MEDIA SLOT HE MEMORY CARD ’...

  • Page 133: Memory Expansion

    Optional Devices Grasp the card and remove it. HE MEMORY CARD ’ HE CARD S SHAPE DEPENDS ON THE CARD YOU PURCHASED Figure 8-7 Removing the inserted memory card ■ Make sure the Bridge media slot indicator is out before you remove the memory media or turn off the computer’s power.
  • Page 134 Optional Devices Remove one screw securing the memory module cover. Lift off the cover. ■ Use a point size 0 Phillips screwdriver. ■ Insert the two memory modules of the same specifications and capacity into Slot A and Slot B respectively. The computer will operate in dual channel mode.

  • Page 135: Removing Memory Module

    Optional Devices Figure 8-10 Pushing the memory module down Seat the cover and secure it with one screw. When you turn the computer on, it should automatically recognize the total memory capacity. Use the HW Setup program to verify that the added memory is recognized.

  • Page 136: Additional Battery Pack (6 Cell And 12 Cell)

    Optional Devices Figure 8-11 Removing the memory module Seat the cover and secure it with one screw. Additional battery pack (6 cell and 12 cell) You can increase the portability of the computer with additional battery packs. If you’re away from an AC power source, you can replace a low battery with a fully charged one.

  • Page 137: Hdmi

    Optional Devices The hibernation and sleep feature can be used with an external monitor. Simply enable hibernation and sleep and the computer will maintain the data as it is displayed on the external monitor. Connect the monitor to the external monitor port. Turn the monitor’s power on.

  • Page 138: Setting For Display Video On Hdmi

    Optional Devices ■ When you connect a television or external monitor to the HDMI port and the display output device is set to HDMI. When you unplug the HDMI cable and re-plug it in please wait at least 5 seconds before you replug the HDMI cable again.

  • Page 139: Troubleshooting

    Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.

  • Page 140: Analyzing The Problem

    Troubleshooting ■ Make sure all options are set properly in the setup program. ■ Check all cables. Are they correctly and firmly attached? Loose cables can cause signal errors. ■ Inspect all connecting cables for loose wires and all connectors for loose pins.

  • Page 141: Hardware And System Checklist

    When the computer starts up, the self-test will be run automatically, and the following will be displayed: TOSHIBA Leading Innovation>>> This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system.

  • Page 142: Power

    Troubleshooting Power When the computer is not plugged into an AC adapter, the battery pack is the primary power source. However, your computer has a number of other power resources, including intelligent power supply and Real Time Clock battery. These resources are interrelated and any one could affect apparent power problems.

  • Page 143: Password

    Troubleshooting Problem Procedure Battery doesn’t charge If the battery is completely discharged, it will not when the AC adapter begin charging immediately. Wait a few minutes. is attached (Battery If the battery still does not charge, make sure the indicator does not outlet is supplying power.

  • Page 144: Keyboard

    Troubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard and Chapter 7, HW Setup Passwords. Problem Procedure Some letter keys Check that the numeric keypad overlay is not produce numbers selected.

  • Page 145: Dvd Super Multi(±R Dl) Drive

    Troubleshooting Problem Procedure Slow performance Your files may be fragmented. Run SCANDISK and defragmenter to check the condition of your files and disk. Refer to your OS documentation or online HELP for information on running SCANDISK and the defragmenter. As a last resort, reformat the hard disk. Then, reload the operating system and other files.

  • Page 146: Diskette Drive

    If you have trouble writing, make sure you are Cannot write correctly observing the following precautions: ■ Use only media recommended by TOSHIBA ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.

  • Page 147: Usb Mouse

    Troubleshooting Problem Procedure Double-tapping does Try changing the double-click speed setting in the not work mouse control utility. Click Start → Control Panel → Hardware and Sound → Devices and Printers → Mouse to access it. The mouse pointer Try changing the speed setting in the mouse moves too fast or too control utility.

  • Page 148: Expresscard

    Troubleshooting Problem Procedure The mouse pointer Try changing the double-click speed setting in the moves too fast or too mouse control utility. Click Start → Control Panel slow → Hardware and Sound → Devices and Printers → Mouse to access it. The mouse pointer The mouse might be dirty.

  • Page 149: External Monitor

    Troubleshooting External monitor Refer also to Chapter 8, Optional Devices, and to your monitor’s documentation. Problem Procedure Monitor does not turn on Make sure that the external monitor’s power switch is on. Confirm that the external monitor’s power cable is plugged into a working power outlet.

  • Page 150: Esata/Usb Combo Port

    Troubleshooting Problem Procedure If you are using an operating system that does not support USB, you can still use a USB mouse and/or USB keyboard. If these devices do not work, make sure the USB KB/Mouse Legacy Emulation item in HW Setup is set to [Enabled]. If problems persist, contact your dealer.

  • Page 151: Sleep/Hibernation

    Troubleshooting Problem Procedure After making a call you Make sure the tone or pulse selection in your can’t hear a ring communications application is set correctly. You can also use the ATD command. Refer to the chapter on AT commands in online help files for Appendix C, Command.

  • Page 152: Lan

    Troubleshooting Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN HUB. Wake-up on LAN Make sure the AC adapter is connected. The does not work Wake-up on LAN function consumes power even when the system is off. If problems persist, consult your LAN administrator.

  • Page 153: Recovery Media

    TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system so it is important that you investigate other sources of assistance first.

  • Page 154: Where To Write

    Troubleshooting Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed on the below. Outside of Europe Europe Australia Germany & Austria TOSHIBA Europe (I.E.) GmbH TOSHIBA Australia Pty Ltd.

  • Page 155: Chapter 10 Legal Footnotes

    Chapter 10 Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. In the text in this manual, *XX is used to show which Legal Footnotes description is related to TOSHIBA computers. Description(s) related to this computer are marked with a blue *XX in this manual.

  • Page 156: 64-Bit

    Published battery life numbers are achieved on select models and configurations tested by TOSHIBA at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.

  • Page 157: Hdd Drive Capacity And External Hdd Capacity*4

    This is normal for all batteries. To purchase a new battery pack, see the accessories information that shipped with your computer or visit the TOSHIBA web site at http://www.pcsupport.toshiba.com. HDD Drive Capacity and External HDD Capacity One Gigabyte (GB) means 10 = 1,000,000,000 bytes using powers of 10.

  • Page 158: Non-Applicable Icons

    Legal Footnotes Non-applicable icons Certain notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
  • Page 159 Table of Contents Specifications................A-1 Appendix A Display Controller................. B-1 Appendix B V.90/V.92..................C-1 Appendix C Wireless LAN................. D-1 Appendix D AC Power Cord and Connectors..........E-1 Appendix E TOSHIBA PC Health Monitor ............F-1 Appendix F User’s Manual Appendixes-1...

  • Page 160: Specifications

    Appendix A Specifications This appendix summarizes the computer’s technical specifications. Environmental requirements Operating Non-operating Ambient temperature 5°C to 35°C -20°C to 60°C Relative humidity 20% to 80% 10% to 90% Altitude (from sea level) 0 to 3,000 meters 0 to 10,000 meters Power requirements AC adapter 100-240 volts AC...
  • Page 161 Specifications Built-in modem The ability of this feature is depending on the model you purchased. Network control unit (NCU) Type of NCU Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer’s speaker Communication specifications...

  • Page 162: Display Controller

    Appendix B Display Controller Display controller The display controller interprets software commands into hardware com- mands that turn particular pixels on or off. A high-resolution external monitor connected to the computer can display up to 2048 horizontal and 1536 vertical pixels at up to 16M colors. The display controller also controls the video mode, which uses industry standard rules to govern the screen resolution and the maximum number of colors that can be displayed on screen.
  • Page 163 Appendix C V.90/V.92 The TOSHIBA internal modem uses V.90 technology. The modem is capable of downstream speeds of 56Kbps (kilobits per second) when connected to an Internet service provider that supports V.90/V.92. As with any modem, the actual throughput (speed of data transfer) depends on analog telephone line conditions, which can vary considerably.
  • Page 164 V.90/V.92 Result codes for a V.90 connectionTable Result code Description CONNECT 32000 EC* Connection at 32000 bits/s CONNECT 36000 EC* Connection at 36000 bits/s CONNECT 40000 EC* Connection at 40000 bits/s CONNECT 44000 EC* Connection at 44000 bits/s CONNECT 48000 EC* Connection at 48000 bits/s CONNECT 52000 EC* Connection at 52000 bits/s...
  • Page 165 V.90/V.92 V42bis V.42 error control and V.42bis data compression V.42 error control only NoEC No error control protocol AT Command -V90=* V.90 Dial Line Rate -V90 sets the maximum V.90 downstream that the modem attempts to connect -V90=0 V.90 disabled -V90=1 V.90 enabled: automatic speed selection - maximum modem speed(default)

  • Page 166: Card Specifications

    Appendix D Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card specifications ■ PCI Express Mini Card Form Factor ■ IEEE 802.11 Standard for Wireless LANs Compatibility ■...

  • Page 167: Radio Characteristics

    Subject to the radio regulations that apply in your country/region, your Wireless LAN card may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for infor- mation about the radio regulations that apply in your country/region.
  • Page 168 Wireless LAN Wireless IEEE 802.11 Channels Sets (Revision B and G)Table Frequency Range Channel ID 2400-2483.5 MHz 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 When installing Wireless LAN cards, the channel configuration is managed as follows: ■...
  • Page 169 Wireless LAN Wireless IEEE 802.11 Channels Sets (Revision A) Table Frequency Range Channel ID 5150-5850 MHz Note 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 US only 5765 US only 5785 US only...

  • Page 170: Ac Power Cord And Connectors

    Appendix E AC Power Cord and Connectors The AC input plug of power cord must be compatible with various interna- tional AC power outlets. Power cords need to meet the local standards and the specifications listed as below: Length: Minimum 1.7 meters Wire size: Minimum 0.75 mm Current rating:...

  • Page 171: United Kingdom

    AC Power Cord and Connectors In Europe, two conductors power cords must be VDE type, H05VVH2-F or H03VVH2-F; while three conductors be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be 2-15P (250V) or 1-15P (125V); while three pin be 6-15P (250V) or 5-15P (125V) as designated in the U.S.

  • Page 172: Toshiba Pc Health Monitor

    TOSHIBA or TOSHIBA's authorized service providers. Additionally, TOSHIBA may also use this information for quality assurance analysis. Subject to the use restrictions above, the HDD data logged may be transferred to entities located outside of your country or region of residence (i.e.: European Union).

  • Page 173: Starting The Toshiba Pc Health Monitor

    TOSHIBA PC Health Monitor Once enabled, you may disable the TOSHIBA PC Health Monitor at any time by uninstalling the software via Uninstall a program in the Control Panel. Doing so will automatically delete all collected information from the HDD.
  • Page 174 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ANSI: American National Standards Institute APM: advanced power manager ASCII: American Standard Code for Information Interchange BIOS: basic input output system CD-ROM: Compact Disc Read Only Memory CD-RW: Compact Disc ReWritable...
  • Page 175 Glossary I/O: input/output IrDA: Infrared Data Association IRQ: interrupt request KB: kilobyte LCD: liquid crystal display LED: light emitting diode LSI: large scale integration MB: megabyte OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect RAM: random access memory RGB: red, green, and blue ROM: read only memory RTC: real time clock...
  • Page 176 Glossary ANSI: American National Standards Institute. An organization established to adopt and define standards for a variety of technical disciplines. For example, ANSI defined the ASCII standard and other information processing requirements. antistatic: A material used to prevent the buildup of static electricity. application: A group of programs that together are used for a specific task such as accounting, financial planning, spreadsheets, word processing and games.
  • Page 177 Glossary cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time.
  • Page 178 Glossary Composite Video (YUV): A standard video signal used to transmit images, e.g. from a VCR to a TV. computer program: A set of instructions written for a computer that enable it to achieve a desired result. computer system: A combination of hardware, software, firmware, and peripheral components assembled to process data into useful information.
  • Page 179 Glossary Digital Audio: An audio compression standard that enables high-quality transmission and real-time playback of sound files. disk drive: The device that randomly accesses information on a disk and copies it to the computer’s memory. It also writes data from memory to the disk.
  • Page 180 (FDD): An electromechanical device that reads and writes to floppy diskettes. Fn-esse: A TOSHIBA utility that allows you to assign functions to hot keys. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
  • Page 181 FN, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that allows you to set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
  • Page 182 Glossary K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte. KB: See kilobyte. keyboard: An input device containing switches that are activated by manually pressing marked keys.
  • Page 183 Glossary motherboard: A name sometimes used to refer to the main printed circuit board in processing equipment. It usually contains integrated circuits that perform the processor’s basic functions and provides connectors for adding other boards that perform special functions. Sometimes called a main board. non-system disk: A formatted floppy diskette you can use to store programs and data but you cannot use to start the computer.
  • Page 184 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Saver Utility: A TOSHIBA utility that allows you to set the parameters for various power-saving functions. printed circuit board (PCB): A hardware component of a processor to which integrated circuits and other components are attached.
  • Page 185 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. touchpad: A pointing device integrated into the TOSHIBA computer palm rest. TTL: Transistor-transistor logic. A logic circuit design that uses switching transistors for gates and storage.
  • Page 186 Glossary Universal Serial Bus: This serial interface allows you to communicate with several devices connected in a chain to a single port on the computer. VGA: Video Graphics Array is an industry standard video adapter that allows you to run any popular software. volatile memory: Random access memory (RAM) that stores information as long as power is supplied to the computer.
  • Page 187 Index AC adapter, 1-6, 2-5, 2-14, A-1 DC IN, 2-5 additional, 1-14, 8-11 connecting, 3-3 connecting, 3-2 indicator, 2-11, 6-3 problems, 9-4 location, 2-5 safety instructions, -ii, -xxix Display, 2-8, 10-3 ASCII characters, 5-7 automatic power off, 1-9 brightness down, 5-4 brightness up, 5-4 Battery controller, B-1...
  • Page 188 Index power plan, 5-3 sleep, 5-3 Fan vent sound mute, 5-3 location, 2-3 TOSHIBA zooming utility FN + 1 (TOSHIBA zooming utility enlarge, 5-5 reduce), 5-5 TOSHIBA zooming utility FN + 2 (TOSHIBA zooming utility reduce, 5-5 enlarge), 5-5 touchpad, 5-4...
  • Page 189 Index numeric mode, 5-6 temporarily changing modes, Numeric keypad, See Keypad overlay temporarily using normal keyboard (overlay on), 5-6 temporarily using overlay Optical disc drive, 2-5, 2-12 (overlay off), 5-7 indicator, 2-11 turning on the overlays, 5-6 safety instructions, -xiv using, 4-3 LAN, 1-7, 4-28 cable types, 4-28...
  • Page 190 TOSHIBA Assist, 1-12 LAN, 9-14 TOSHIBA Bluetooth Stack, 1-13 LCD panel, 9-6 TOSHIBA ConfigFree, 1-12 modem, 9-12 TOSHIBA Disc Creator, 1-12, 4-11 overheating power down, 9-4 TOSHIBA DVD-RAM utility, 1-12 password, 9-5 TOSHIBA Face Recognition, 1-13 pointing device, 9-8 using, 4-20...

This manual is also suitable for:

Satellite pro l510 series

Table of Contents