Page 1 PUB. DIE-0444-000 HD Camcorder Instruction Manual NTSC...
Page 2: Important Usage Instructions
FCC/IC NOTICE HD Camcorder, VIXIA mini systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two con- ditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 3 (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. Canon U.S.A., Inc. One Canon Park, Melville, NY 11747, USA Tel No. 1-800-OK-CANON (1-800-652-2666) Battery Charger CB-2LV This power unit is intended to be correctly orientated in a vertical or floor mount position.
Page 4 REGIONS OF USE The VIXIA mini is in compliance (as of June 2013) with the radio signal regulations of the regions listed below. For details on other regions where it can be used, make inquiries with the contacts listed at the end of this instruction manual (A 253).
Page 5 • This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video.
Page 6: About This Manual
About this Manual Thank you for purchasing the Canon VIXIA mini. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting (A 199). Conventions Used in this Manual Important precautions related to the camcorder’s opera-...
Page 7 • The photos included in this manual are simulated pictures taken with a still camera. • Illustrations of the camcorder’s screen or a computer’s screen included in this manual may show only relevant parts of the screen. • Navigation buttons: The navigation bar at the bottom of the page offers up to four buttons to let you get quickly to the information you want to find.
Page 8: Table Of Contents
Table of Contents Important Usage Instructions........2 About this Manual ............6 The Camcorder’s Functions in Real-Life Situations ..............13 Unique functions for special cases ......13 Getting the look you want......... 14 Challenging subjects and shooting conditions ..15 Audio, playback, editing and others......
Page 9 Inserting and Removing a Memory Card....36 First Time Settings ............ 38 Basic Setup ............. 38 Changing the Time Zone .......... 41 Initializing a Memory Card......... 42 Basic Operation of the Camcorder ......44 Using the Touch Screen ........... 44 Using the Menus ............
Page 10 Advanced Functions ........... 85 Video Quality and Shooting Modes ......87 Selecting the Video Quality ........87 Selecting the Photo Size .......... 89 Selecting the Shooting Mode ........90 Special Recording Modes......... 94 Interval Recording ............ 94 Slow and Fast Motion..........98 Video Snapshot............
Page 11 Saving Recordings and Uploading Movies to the Web Using an iOS Device ........151 Wireless Connections Using an Access Point ..154 Sharing Recordings with CANON iMAGE GATEWAY ............. 154 Wireless Playback on a Computer......161 Wi-Fi Connection Using an Access Point....163...
Page 12 Additional Information ........176 Appendix: Menu Options Lists........ 178 [1 Other Settings] Menus ........180 Appendix: Onscreen Icons and Displays ....192 Trouble? ..............199 Troubleshooting ............. 199 List of Messages ............ 210 Do’s and Don’ts ............226 Handling Precautions ..........226 Maintenance/Others..........
Page 13: The Camcorder's Functions In Real-Life Situations
The Camcorder’s Functions in Real-Life Situations Unique functions for special cases Record a mirror image of your dance training so you can practice along with the playback scene. Automatic Image Rotation and Image Flipping (A 108) Shoot a cool time-lapse video or use slow motion to check your golf swing.
Page 14: Getting The Look You Want
Create a dynamic montage sequence with short cuts. Video Snapshot (A 100) Getting the look you want Get gorgeous video and photos without bothering with settings. N mode (A 54) Make the image brighter or darker than the exposure set by the camcorder.
Page 15: Challenging Subjects And Shooting Conditions
Challenging subjects and shooting conditions Shoot great video of special scene situations with minimal settings. Shooting Modes (A 90) Obtain natural-looking colors even under special lighting conditions. White Balance (A 112) Optimize the exposure for the desired subject just by touch- ing the screen.
Page 16 Save parts of your video as photos or short video snapshot scenes. Capturing Photos/Video Snapshot Scenes (A 120) Convert your scenes into a smaller file size to upload to the Web. Converting and Resizing Movies (A 128) Play a slideshow of your photos. Slideshow (A 84) Enjoy your recordings on a TV.
Page 17: Wireless Functions
Wireless functions Use your smartphone or tablet as a remote control while recording. Wi-Fi Remote Control (CameraAccess) (A 145) Use a Web browser on your smartphone or tablet to access and play back the recordings in the camcorder. Remote Browse/Playback via Browser (A 148) Use an iOS app to wirelessly transfer recordings to your iPhone/iPad and upload them to the Web.
Page 18 Share your recordings with Web albums using CANON iMAGE GATEWAY. CANON iMAGE GATEWAY (A 154) Connect the camcorder to your home network and wire- lessly stream your recordings. Media Server (A 161) Wi-Fi Connection to an Access Point (A 163) Review and change Wi-Fi settings (for advanced users).
Page 19: Getting To Know The Camcorder
Getting to Know the Camcorder Supplied Accessories and CD-ROM The following accessories are supplied with the camcorder: CB-2LV Battery Charger* NB-4L Battery Pack IFC-400PCU USB Cable WS-DC11 Wrist Strap Getting Started Leaflet Canon VIXIA mini CD-ROM * CB-2LVE including power cord, in Asia.
Page 20 An Internet connection is required for full installation of the software. * CANON iMAGE GATEWAY is an online service that allows you to share movies and photos, make photo albums, and more. This ser- vice may not be available in all countries/regions.
Page 21: Names Of Parts
Names of Parts Left side view Photo button (A 61) Memory card slot cover (A 36) ACCESS indicator (A 54, 61) LCD panel (A 25) Adjustable stand (A 25) Memory card slot (A 36) Strap mount (A 25) USB terminal (A 124, 126)
Page 22 Right side view 10 11 12 (playback mode) button (A 65, 70) 10 Terminal cover 11 Power indicator 12 Power switch (ON/OFF) (A 54, 61) 13 Strap mount (A 25) 14 HDMI terminal (A 124, 125) 15 DC IN terminal To use the optional CA-110 Compact Power Adapter.
Page 23 Front view Top view 16 Lens cover 17 Stereo microphone (A 110) 18 Speaker (A 67) 19 LCD touch screen (A 26, 44)
Page 24 Bottom view Back view 24 25 20 Serial number 21 Tripod socket (A 228) 22 Battery compartment cover (A 30) 23 Wi-Fi antenna (A 138) 24 Battery release latch (A 30) 25 Battery compartment (A 30)
Page 25 Adjusting the camcorder’s position The camcorder has an adjustable stand (5) and an articu- lated LCD panel (4) that allow you to easily adjust its position to match your recording conditions. Here are typical shooting positions (all degree measure- ments are approximate): 80°...
Page 26 19 LCD touch screen • The screen is produced using extremely high-precision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasionally misfire or appear as black, red, blue or green dots. This has no effect on the recorded image and does not constitute a malfunction.
Page 27: Preparations
Preparations Charging and Inserting the Battery Pack The first step for using your camcorder is to prepare the power supply. This section explains how to charge a bat- tery pack and how to install it in the camcorder. Using a Memory Card Next, you need to prepare a memory card where your movies and photos will be recorded.
Page 28: Basic Operation Of The Camcorder
Basic Operation of the Camcorder In this section you can learn more about basic operations, such as using the touch screen, changing operating modes and using the menus.
Page 29: Charging And Inserting The Battery Pack
Charging and Inserting the Battery Pack Charging and Inserting the Battery Pack Charge the supplied battery pack in advance, using the supplied battery charger. ■ Charging the Battery Pack Attach the battery pack to the battery charger, aligning the triangle marks. Extract the fold-in plug and plug the battery charger into a power outlet.
Page 30: Inserting The Battery Pack
Push the battery compartment cover in the direction of the arrow to open it. Insert the battery pack with the Canon label facing the bottom of the camcorder. • Push the battery pack all the way in, until the battery...
Page 31 Charging and Inserting the Battery Pack Close the battery compartment cover. • Push the cover until you hear a click. Do not force the cover closed if the battery pack is not correctly inserted. To remove the battery pack Open the battery compartment cover and slide the battery release latch in the direction of the arrow so the battery pack springs out.
Page 32 Charging and Inserting the Battery Pack • Do not connect to the camcorder’s DC IN terminal any electrical equipment that is not expressly rec- ommended for use with this camcorder. • To prevent equipment breakdowns and excessive heating, do not connect the supplied battery charger to voltage converters for overseas travels or special power sources such as those on aircraft and ships, DC-AC inverters, etc.
Page 33 Charging and Inserting the Battery Pack • USA and Canada only: The Lithium ion/polymer battery that powers the product is recyclable. Please call 1-800-8-BATTERY for infor- mation on how to recycle this battery.
Page 34: Using A Memory Card
As of June 2013, the movie recording function has been tested using microSD/microSDHC/microSDXC cards made by Pana- sonic, Toshiba and SanDisk. For the latest information on mem- ory cards that can be used, visit your local Canon Web site. Memory card type: microSD card...
Page 35 Using a Memory Card • After repeatedly recording, deleting and editing scenes (fragmented memory), it will take longer to write data on the memory card and recording may stop. Save your recordings and initialize the memory card using the [Complete Initialization] option. •...
Page 36: Inserting And Removing A Memory Card
Using a Memory Card Inserting and Removing a Memory Card Make sure to initialize all memory cards with the camcorder, using the [Complete Initialization] option, before using them for the first time. When you turn on the camcorder for the first time, you will need to complete the basic setup first (A 38), and then initialize the memory card (A 42).
Page 37 Using a Memory Card Close the memory card slot cover. • Do not force the cover closed if the memory card is not correctly inserted. To remove the memory card Push the memory card once to release it. When the memory card springs out, pull it all the way out.
Page 38: First Time Settings
First Time Settings First Time Settings Basic Setup The first time you turn on the camcorder, you will be guided by the camcorder’s basic setup screens to select the camcorder’s language and set the date and time. For details on how to use the touch screen, refer to Using the Touch Screen (A 44).
Page 39 First Time Settings Touch [æ] after selecting a language Touch [Y.M.D], [M.D,Y] or [D.M.Y] to select the date for- mat you prefer and then touch [æ]. • After you select the date format, the [Date/Time] screen will appear with the first field selected. Touch a field you want to change (year, month, day, hours or minutes).
Page 40 First Time Settings Set the correct date and time by changing all the fields in the same way. • Touch [24H] to use 24-hour clock or leave it unselected to use 12-hour clock (AM/PM). Touch [OK] to complete the basic setup and close the setup screen.
Page 41: Changing The Time Zone
First Time Settings Changing the Time Zone Change the time zone to match your location. The default set- ting is New York. In addition, the camcorder is able to retain the date and time of another location. This is convenient when you travel so that you can set the camcorder to match the time of your home location or that of your destination.
Page 42: Initializing A Memory Card
First Time Settings Initializing a Memory Card Initialize memory cards when you use them with this camcorder for the first time. You can also initialize a memory card to perma- nently delete all the recordings it contains. Shooting mode Playback I J L K ’...
Page 43 First Time Settings > > > > Other Settings] [Initialize > > > [Initialize] [Complete Initialization] [Yes] [OK] > Touch this option if you want to physically erase all the data rather than just clear the file allocation table of the memory card. If you selected the [Complete Initialization] option, you can touch [Cancel] to cancel the initialization while it is in progress.
Page 44: Basic Operation Of The Camcorder
Basic Operation of the Camcorder Basic Operation of the Camcorder Using the Touch Screen The buttons and menu items that appear on the touch screen change dynamically depending on the operating mode and the task you are performing. With the intuitive touch screen interface you have all the controls at your fingertips.
Page 45: Using The Menus
Basic Operation of the Camcorder • In the following cases, you may not be able to perform touch operations correctly. - Using your fingernails or hard-tipped objects, such as ballpoint pens. - Operating the touch screen with wet or gloved hands. - Applying excessive force with your finger.
Page 46 Basic Operation of the Camcorder ■ 0 (Home) Menu Recording mode Playback mode Touch [0] on the bottom left corner (recording mode) or top left corner (playback mode) of the screen to open the 0 (Home) menu. Drag your finger left/right to bring the desired menu to the center.
Page 47 Basic Operation of the Camcorder Menu item Description [1 Other Settings] (A 50, 180) Opens the [1 Other Settings] menus, which give you access to various camcorder settings. [Audio Scene]* (recording mode only) (A 110) Optimize audio settings for your surroundings to get the best possible sound.
Page 48 Basic Operation of the Camcorder Menu item Description [< Self Timer] (recording mode only) (A 102) Convenient function to give you time to get in the picture after setting up the camcorder. [4 Remote Control+Streaming] (recording mode only) (A 145) Use your smartphone or tablet as a remote control to record with the camcorder.
Page 49 Basic Operation of the Camcorder Menu item Description [— Wi-Fi] (playback mode only) (A 138) Allows you to access the various Wi-Fi functions, such as uploading recordings to the Web or playing back record- ings using a smartphone. ■ Using the Menus Changing the camcorder’s various settings using the menus is very easy.
Page 50 Basic Operation of the Camcorder The [1 Other Settings] Menu The [1 Other Settings] menus offer many options to control various aspects of the camcorder’s operation. For details, refer to the complete list of settings in the appendix [1 Other Set- tings] Menus (A 180).
Page 51: Operating Modes
Basic Operation of the Camcorder Touch the tab of the desired menu. Drag your finger up/down to bring the setting you want to change into the orange selection bar. • You can also use the [Í] and [Î] icons for scrolling. •...
Page 52 Basic Operation of the Camcorder ■ Recording When you set the power switch to ON, the camcorder will turn on in recording mode. In recording mode, the camcorder’s oper- ating mode is determined by the selected shooting mode (A 90). The shooting mode icons are the same icons used in the shooting mode selection screen.
Page 53: Basic Recording And Playback
Basic Recording and Playback Basic Recording This section covers how to easily record video and photos in N mode. To record using other shooting modes, use more advanced functions and enjoy full access to all menu settings, refer to Advanced Functions (A 85).
Page 54: Basic Recording
Basic Recording Basic Recording Recording Video With N mode, you can take great-looking videos by letting the camcorder automatically adjust settings. N mode is therefore used as an example in the following procedure. You can select a different shooting mode according to the shooting conditions (A 90).
Page 55 Basic Recording Set the power switch to ON to turn on the camcorder. • The lens cover will open. • Place and adjust the camcorder as necessary. If shooting with the camcorder hand-held, be careful not to obstruct the lens. Set the camcorder to mode.
Page 56 Basic Recording Touch [Ü] to begin recording. • Movies have an aspect ratio of 16:9. When the recording starts, the onscreen display will change to letterbox mode. • The ACCESS indicator will flash from time to time while the scene is being recorded. Touch [Ñ] to stop recording.
Page 57: Changing The Field Of View
Basic Recording ■ Changing the Field of View The camcorder features a ultra wide angle lens so you can cap- ture a vast field of view (about 160° for video, about 170° for photos), for example to include a large group in a fisheye-like image.
Page 58: About The Smart Auto Function
Basic Recording About AUTO mode • Only the following functions are available in N mode. - Video snapshot (A 100). - Face detection and tracking (A 117) to get the best exposure when a person’s face is detected. - Decoration (A 103) to add a fun personal touch using stamps and drawings.
Page 59 Basic Recording Smart AUTO icons Background Subject Bright* Blue skies* Vivid colors* People (stationary) People (moving) Subjects other than peo- ple, such as landscapes * The icon in parentheses appears under backlight conditions. Background Subject Dark + Sunset Dark Spotlight People (stationary) —...
Page 60 - Do not press the ^ button. • Be sure to save your recordings regularly (A 131), especially after making important recordings. Canon shall not be liable for any loss or corruption of data. • If a subject is too close to the camcorder, it may not be able to focus correctly.
Page 61: Taking Photos
Basic Recording • When recording in bright places, it may be difficult to use the LCD screen. In such cases, you can adjust the LCD backlight with the 1 > > [LCD Back- light] setting or adjust the brightness of the LCD screen with the 1 >...
Page 62 Basic Recording Set the power switch to ON to turn on the camcorder. • The lens cover will open. • Place and adjust the camcorder as necessary. If shooting with the camcorder hand-held, be careful not to obstruct the lens. Shooting mode button Set the camcorder to N mode.
Page 63 Basic Recording 4, 5 4, 5 Press the photo button halfway to lock the exposure. • The camcorder will beep and automatically adjust the exposure. • and the aperture value and shutter speed will appear on the screen. Press the photo button fully to take a photo. •...
Page 64 Basic Recording The information in the sidebars, (important precau- tions) and (additional notes) sections in the previous pages (A 58-61) apply also to photo shooting. • Photos can only be recorded in record standby mode.
Page 65: Basic Playback
Basic Playback Basic Playback Playing Back Video Shooting mode Playback I J L K ’ Press the ^ button to turn on the camcorder in play- back mode. • The [y] index screen will appear. • To play back only video snapshot scenes, touch 0 >...
Page 66 Basic Playback Visual bar shows the relative loca- tion of the cur- rent index screen. Folder name. The last four digits represent the recording date (1103 = 3 November). Look for the scene you want to play back. • Drag your finger right/left (2a) or touch [Ï] or [Ð] (2b) to display the previous/next index screen.
Page 67 Basic Playback To adjust the volume During playback, touch the screen to display the play- back controls. Touch [ ], drag your finger along the [Speaker Volume] bar, or repeatedly touch the speaker icon on either end of it, to adjust the volume and touch [K]. Playback controls Playback Playback pause...
Page 68 Basic Playback Volume control. Decoration (A 103). Capture a video snapshot scene (A 120). Fast playback* backward/forward. 10 Recording date. 11 Jump to the beginning of the next scene. 12 Resume the playback. 13 Capture the displayed frame as a photo (A 122). 14 Slow playback** backward/forward.
Page 69: Repeat Playback
Basic Playback Touch [K] twice to return to the index screen. ■ Repeat Playback During playback of the desired scene: > > Touch the screen to display the playback controls [Ý] > [Ð] • The same scene will be played back in a loop. Repeat the pro- cedure to return to normal playback.
Page 70 Basic Playback The ^ button When the camcorder is turned on, press the ^ button to switch back and forth between playback and recording mode. • When the camcorder is off, you can press the ^ button to turn it on directly in playback mode. •...
Page 71 Basic Playback • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not remove the memory card. - Do not disconnect the power source or turn off the camcorder.
Page 72: Viewing Photos
Basic Playback • Sound will not be output from the built-in speaker while the optional HTC-100 High Speed HDMI cable is con- nected to the camcorder. Viewing Photos Shooting mode Playback I J L K ’ y Press the ^ button to turn on the camcorder in play- back mode.
Page 73 Basic Playback > [} Photo Playback] Visual bar shows the relative loca- tion of the cur- rent index screen. Folder name. The last four digits represent the recording date (1103 = 3 November). Look for the photo you want to view. •...
Page 74: Photo Jump Function
Basic Playback ■ Photo Jump Function When you have recorded a large number of photos, you can jump easily through the photos using a scroll bar. In single photo view, display the [Photo Jump] scroll bar. > Touch the screen to display the playback controls Touch [Ï] or [Ð], or drag your finger along the scroll bar to find the desired photo.
Page 75 Basic Playback • Touch [ ] to magnify the image further. Touch [ ] to reduce the magnification. • Drag your finger along the magnified area to check other parts of the photo. The white square within the frame rep- resents the approximate location of the portion of the photo that is shown magnified.
Page 76: Deleting Scenes
Basic Playback Deleting Scenes You can delete those scenes that you are not interested in keep- ing. Deleting scenes allows you also to free up space on the memory card. Shooting mode Playback I J L K ’ ■ Deleting a Single Scene Play back the scene you want to delete (A 65).
Page 77: Deleting Scenes From The Index Screen
Basic Playback ■ Deleting Scenes from the Index Screen Open the [y] or [¦] index screen (A 65). • To delete all the scenes saved in the same folder (recorded on the same date), drag your finger left/right until a scene you want to delete appears.
Page 78 Basic Playback Options [<folder name>]: Delete all the scenes recorded on a particular date that are stored in the same folder. The last four digits of the folder name that appears in the button indicate the date the folder was cre- ated (ex.
Page 79: Trimming Scenes
Basic Playback • To delete all movies and make all recordable space available again you may prefer to initialize the memory card (A 42). Trimming Scenes You can trim scenes by removing everything up to a certain point or everything after a certain point. By doing so, you leave only memorable moments to keep for posterity.
Page 80 Basic Playback • Playback controls will appear on the screen (A 67). Use any special playback modes (fast playback, frame reverse/ advance) as necessary to locate the desired point. Trim the scene. > > [Trim] [Trim Before Marker] or [Trim After Marker] [Save as New] or [Overwrite] •...
Page 81: Deleting Photos
Basic Playback Deleting Photos You can delete those photos that you are not interested in keep- ing. Shooting mode Playback I J L K ’ y ■ Deleting a Single Photo In single photo view, select the photo you want to delete.
Page 82: Deleting Photos From The Index Screen
Basic Playback ■ Deleting Photos from the Index Screen Open the [}] index screen (A 72). • To delete all the photos saved in the same folder (recorded on the same date), drag your finger left/right until a photo you want to delete appears. Delete the photos.
Page 83 Basic Playback Options [<folder name>]: Delete all the photos taken on a particular date. The last four digits of the folder name that appears in the button indicate the date the folder was created (ex. 1103 = 3 November). [Select]: Select individual photos to delete.
Page 84: Slideshow
Basic Playback Slideshow You can play a slideshow of all the photos. Shooting mode Playback I J L K ’ y Open the [}] index screen (A 72). Touch the photo that will open the slideshow to display it in single photo view. Start the slideshow.
Page 85: Advanced Functions
Advanced Functions Video Quality and Shooting Modes This section explains how to change the video quality of your recordings and how to use the camcorder’s various shooting modes to get perfect recordings when you are shooting fashion scenes, dance training sessions, night scenes or many other special scenes.
Page 86: When You Want More Control
When You Want More Control This section explains functions you can use when you want more control over how your recordings look. It is more oriented for advanced users and covers functions such as white balance, exposure compensation and frame rate.
Page 87: Video Quality And Shooting Modes
Video Quality and Shooting Modes Video Quality and Shooting Modes Selecting the Video Quality The camcorder offers three video quality options (bit rates*) for recording movies. Select 24 Mbps for higher video quality; select 4 Mbps for longer recording times or smaller file sizes. The table fol- lowing the procedure (A 88) gives approximate recording times.
Page 88 Video Quality and Shooting Modes Approximate recording times Video quality (Resolution) Memory card 24 Mbps 17 Mbps 4 Mbps (1920x1080) (1920x1080) (1280x720) 8 GB 40 min. 1 hr. 4 hr. 20 min. 16 GB 1 hr. 25 min. 2 hr. 5 min. 8 hr.
Page 89: Selecting The Photo Size
Video Quality and Shooting Modes Selecting the Photo Size Photos are recorded as JPG files. The camcorder offers three photo sizes but the photo quality cannot be changed. As a gen- eral rule, select a larger photo size for higher quality. Shooting mode Playback I J L K...
Page 90: Selecting The Shooting Mode
Video Quality and Shooting Modes Selecting the Shooting Mode In addition to N mode, the camcorder features a number of shooting modes that offer the most appropriate settings for a variety of special scenes. You can also use the ’ shooting mode when you want the camcorder to set the exposure auto- matically but control manually some advanced settings.
Page 91 Video Quality and Shooting Modes Drag your finger up/down to bring the desired shooting mode to the center and then touch [OK]. Options ( Default value; ƒ - special scene shooting mode) [N Auto] Let the camcorder take care of most of the set- tings while you concentrate on recording (A 54).
Page 92 Video Quality and Shooting Modes [L Beach] (ƒ) To record on a sunny beach without the subject being underexposed. [K Snow] (ƒ) To record in bright ski resorts without the sub- ject being underexposed. Macro] (ƒ) The camcorder can focus at a shorter distance, allowing you to get closer shots of flowers or insects.
Page 93 Video Quality and Shooting Modes • [I Sports]/[L Beach]/[K Snow]: The picture may not appear smooth during playback. • [L Beach]/[K Snow]: The subject may become over- exposed on cloudy days or in shaded places. Check the image on the screen. •...
Page 94: Special Recording Modes
Special Recording Modes Special Recording Modes Interval Recording You can easily set the camcorder to record half a second of video or a photo at fixed intervals from 5 seconds to 10 minutes. When recording video using interval recording, you can join all these short bits of video (interval scenes) into a single time-lapse scene that captures the passage of time.
Page 95 Special Recording Modes • and the selected interval length will appear on the screen. Also, the remaining video recording time will auto- matically be reduced by about half. Start recording with interval recording. • Movies: Touch [Ü] to record the first video. Photos: Press the photo button, first halfway, then fully.
Page 96 Special Recording Modes Touch [Yes] to delete the original interval scenes. • If you prefer to keep the original interval scenes even after they were successfully joined, touch [No] instead. • You can touch [Stop] to interrupt the operation while it is in progress.
Page 97 Special Recording Modes Touch [Join] and continue from step 5 in the previous procedure (A 95). • Face detection and tracking, decoration, exposure adjustment and Wi-Fi functions cannot be used during interval recording. In N mode, the Smart AUTO function that automatically adjusts the brightness or color will be disabled as well.
Page 98: Slow And Fast Motion
Special Recording Modes • When you select a recording interval of 30 seconds or longer, the camcorder will enter standby mode when it is not recording in order to save power. In standby mode the screen will turn off and the power indicator will light up in red.
Page 99 Special Recording Modes Touch [Ü]/[Ñ] to record scenes in slow/fast motion. To change the playback speed You can change the playback speed while activating slow/fast motion (from the [ Slow Motion]/[ Fast Motion] selection screen) or from the record standby screen after slow/fast motion is activated.
Page 100: Video Snapshot
Special Recording Modes Video Snapshot You can record a series of short scenes, each a few seconds long. When you play the video snapshot scenes one after the other, this will result in fast-paced, dynamic video. You can also record a video snapshot scene every time you record a photo. Shooting mode Playback I J L K...
Page 101 Special Recording Modes To record a photo along with a video snapshot scene: Press the photo button, first halfway, then fully. • The camcorder records a photo and about 4 seconds of video after that. Then, the camcorder returns to record standby mode.
Page 102: Convenient Functions
Convenient Functions Convenient Functions Self Timer Shooting mode Playback I J L K ’ > > > [< Self Timer] [C 2 sec] or [G 10 sec] > • will appear on the screen. • Repeat, selecting [j Off], to turn off the self timer. Movies: In record standby mode, touch [Ü].
Page 103: Decoration: Adding A Personal Touch
Convenient Functions • Once the countdown has begun, any of the following actions will cancel the self timer. - Touching [Ü] again, when recording movies. - Pressing the photo button, when recording photos. - Turning off the camcorder. - Pressing the ^ button. Decoration: Adding a Personal Touch Add a new level of enjoyment to your scenes by decorating them.
Page 104: Decorating Scenes While Recording
Convenient Functions ■ Decorating Scenes while Recording Shooting mode Playback I J L K ’ In record standby mode, touch [Ò] to open the deco- ration screen. Use a tool from the toolbar as explained in the follow- ing procedures. Touch [Ü]/[Ñ] to record movies with your decorations.
Page 105 Convenient Functions [Ó Pens and Stamps] Select the type of pen or stamp and its color. You can also save a single canvas or load a previ- ously saved canvas. [× Animated Stamps] Select animated stamps to add to your decoration. [ß] Minimize the toolbar to the top of the screen to view almost all of the canvas.
Page 106 Convenient Functions Select the desired pen or stamp from [Tools]. • The main decoration screen will appear again. Draw freely on the canvas with your fingertip. • To select a different pen or stamp: Repeat steps 1 and 2. • To change color: Touch [Ó] and then touch the white or >...
Page 107: Decorating Scenes During Playback
Convenient Functions Touch one of the buttons. Touch anywhere on the canvas to place the selected animated stamp. You can also drag some animated stamps to a different location. ■ Decorating Scenes during Playback Have fun decorating movies while playing them back with friends and family.
Page 108: Image Rotation And Image Flipping
Convenient Functions Decorate the scene using the tools from the toolbar as explained in the previous sections. • In playback mode, the [Ü]/[Ñ] button is replaced by [Ý]/ [Ð]. Touch [Ý] to pause the playback; touch [Ð] to resume. Image Rotation and Image Flipping The camcorder offers two functions to manipulate how the image is recorded or played back.
Page 109 Convenient Functions Example of image flipping Mirror Image] set to [Off] Mirror Image] set to [On] Examples of image rotation when [ Detect Orientation] is set to [On] Recording Playback Camcorder’s Onscreen Movies** Photos*** orientation* icon...
Page 110: Audio Scenes
Convenient Functions Recording Playback Camcorder’s Onscreen Movies** Photos*** orientation* icon * As seen from the back of the camcorder, with the lens pointing for- ward. ** Even when orientation detection is turned on, movies recorded with the camcorder turned sideways cannot be played back in vertical ori- entation using the camcorder.
Page 111 Convenient Functions > > > [Audio Scene] Desired audio scene [OK] Options ( Default value) Standard] To record most general situations. The camcorder records with standard settings. Music] To vibrantly record music performances and singing indoors. Speech] Best for recording human voices and dialog. Forest and Birds] To record birds and scenes in forests.
Page 112: When You Want More Control
When You Want More Control When You Want More Control White Balance The white balance function helps you to accurately reproduce colors under different lighting conditions so that white objects will always look truly white in your recordings. Shooting mode Playback I J L K ’...
Page 113 When You Want More Control To set the custom white balance Point the camcorder at a white object, so it fills the frame at the center of the screen. Touch [Set WB]. When the adjustment is completed, Å stops flashing and disappears.
Page 114: Exposure
When You Want More Control • When you select the custom white balance: - Reset the white balance when you change locations or the lighting or other conditions change. - Depending on the light source, Å may keep flash- ing. The result will still be better than with [Ã...
Page 115: Exposure Compensation
When You Want More Control Shooting mode Playback I J L K ’ • Select a shooting mode other than [N Auto]. Select the desired shooting mode (A 90), but do not touch [OK]. Touch [y] to open the exposure adjustment screen. ■...
Page 116 When You Want More Control • The compensation range may vary depending on the initial brightness of the image, and some values may be grayed out. Touch [X] to apply the selected shooting mode and exposure compensation value. • During exposure lock, y and the exposure compensation value will appear on the screen.
Page 117: Face Detection
When You Want More Control • If the shooting mode is changed during exposure com- pensation, the camcorder will return to automatic expo- sure. • By default, the camcorder corrects for backlight condi- tions. You can turn off the automatic correction with the >...
Page 118 When You Want More Control Point the camcorder at a person. • If there is more than one person in the picture, the cam- corder will automatically select one person it determines is the main subject. The main subject is indicated by a white frame and the camcorder will optimize the settings for that person.
Page 119 When You Want More Control • In certain cases, faces may not be detected correctly. Typical examples include: - Faces extremely small, large, dark or bright in relation to the overall picture. - Faces turned to the side, at a diagonal or partially hid- den.
Page 120: Capturing Video Snapshot Scenes And Photos From A Movie
When You Want More Control Capturing Video Snapshot Scenes and Pho- tos from a Movie You can capture video snapshot scenes or photos from a previ- ously recorded scene. For example, you may want to print pho- tos from video recorded at a party or create a small video clip using video snapshot scenes from the highlights of an event.
Page 121 When You Want More Control Touch [Ñ] to stop the playback. • The new video snapshot scene will be saved in a folder corresponding to the date when it was captured. • You can change the length of the video snapshot scenes you capture to 2 or 8 seconds with the 1 >...
Page 122: Capturing Photos
When You Want More Control ■ Capturing Photos Shooting mode Playback I J L K ’ Play back the scene from which you want to capture the photo (A 65). At the point you want to capture, pause the playback and capture the photo.
Page 123: External Connections
External Connections Terminals on the Camcorder This section gives more details about the camcorder’s output terminals and presents connection diagrams for connecting your camcorder to other devices. Playback on a TV Screen This section explains how to connect the camcorder to an HDTV using the optional HTC-100 High Speed HDMI Cable.
Page 124: Terminals On The Camcorder
Terminals on the Camcorder Terminals on the Camcorder Open the side terminal covers to access the terminals on the camcorder. HDMI Terminal The HDMI terminal offers a high-quality digital connection that combines audio and video in a single convenient cable. This terminal is an HDMI mini receptacle.
Page 125: Connection Diagrams
Terminals on the Camcorder Connection Diagrams In the following connection diagrams, the left side shows the ter- minals on the camcorder and the right side shows (for reference only) an example of terminals on a connected device. Connection HDMI Type: Digital Quality: High definition Output only Connect to a high-definition TV (HDTV) with an HDMI input termi- nal.
Page 126 Terminals on the Camcorder Connection Type: Digital data connection Connect to a computer to save your recordings. USB Cable (supplied) Mini-B Standard-A (computer) • The HDMI terminal on the camcorder is for output only. Do not connect it to an HDMI output terminal on an external device, as this may damage the camcorder.
Page 127: Playback On A Tv Screen
Terminals on the Camcorder Playback on a TV Screen Connect the camcorder to a TV to enjoy your recordings with family and friends. Shooting mode Playback I J L K ’ Turn off the camcorder and the TV. Connect the camcorder to the TV. •...
Page 128: Saving And Sharing Your Recordings
Saving and Sharing Your Recordings Saving and Sharing Your Recordings Converting and Resizing Movies You can convert scenes to a lower video quality (down-conver- sion) to obtain smaller file sizes. This is convenient, for example, when you want to upload videos to the Web, as smaller video files will upload faster.
Page 129 Saving and Sharing Your Recordings • A checkmark ! will appear on the scenes you touch. The total number of selected scenes will appear next to the " icon. • Touch a selected scene to remove the checkmark. To > remove all checkmarks at once, touch [Remove All] [Yes].
Page 130 Saving and Sharing Your Recordings Touch [START] to convert the scene. • Touch [STOP] to interrupt the operation while it is in progress. Touch [OK]. Options for converting and resizing movies Video quality Video quality and resolution of the converted scene and resolu- 24 Mbps 17 Mbps...
Page 131: Saving Recordings On A Computer
Saving and Sharing Your Recordings • The following scenes cannot be converted/resized using MP4 conversion. - Slow motion scenes recorded using 3 Mbps video quality ([x1/4] speed). - Interval scenes with the icon. • Scenes recorded using different frame rates cannot be joined into a single scene during MP4 conversion.
Page 132 The ‘ImageBrowser EX User Guide’ will also be installed with the software. • Before installing the software, make sure your computer is connected to the Internet. Insert the VIXIA mini CD-ROM into the computer’s disc drive. Windows: Use Windows Explorer to open the drive into which you inserted the CD-ROM.
Page 133 Saving and Sharing Your Recordings Follow the onscreen instructions to complete the installation. • During the installation process, you may be prompted to install Microsoft Silverlight. Follow the instructions to do • CameraWindow will also be installed. To check that the software was installed correctly You can check that the software was installed correctly by looking for the ImageBrowser EX icon in the following location.
Page 134: Connecting The Camcorder To A Computer
Saving and Sharing Your Recordings First-time connection to a computer running Windows The first time you connect the camcorder to the computer, you also need to select the CameraWindow auto-launch setting. Connecting the Camcorder to a Computer Shooting mode Playback I J L K ’...
Page 135 Saving and Sharing Your Recordings • When the camcorder is connected to a computer: - Do not remove the memory card. - Do not change or delete any of the memory card’s folders or files directly from the computer as this may result in permanent data loss.
Page 136 Saving and Sharing Your Recordings • Regardless of the charge conditions of the battery pack in the camcorder, Battery Capacity on the camcorder’s details area of CameraWindow’s main screen will always appear as ‘Full’. • Long scenes, whose video data exceeds 4 GB, will be recognized as multiple files on other devices.
Page 137: Uploading Recordings To The Web
With the supplied software ImageBrowser EX, you can also upload your movies to YouTube and photos to Facebook from your computer. Additionally, you can use CANON iMAGE GATE- WAY* to make photo albums and more. * This service may not be available in all countries/regions.
Page 138: Wi-Fi Functions
Android device*. Sharing Recordings with CANON iMAGE GATEWAY** Connect the camcorder to an access point on your home network to share recordings on CANON iMAGE GATEWAY. From there you can use a variety of Web services to enjoy your recordings.
Page 139: Wireless Connections Using An Access Point
* “iOS device” is used in this text to refer to Wi-Fi-enabled iPhones and iPads, while “Android device” refers to Wi-Fi- enabled Android smartphones and tablets. ** The availability of this Web service varies from area to area. For the latest information, visit your local Canon Web site.
Page 140: The Camcorder's Wi-Fi Functions
The Camcorder’s Wi-Fi Functions The Camcorder’s Wi-Fi Functions You can use the camcorder’s Wi-Fi functions to connect wire- lessly to Wi-Fi enabled devices* like smartphones or tablets and save, play back and upload your recordings. Refer to Glossary (A 175) for a definition of the frequently used terms in this text. * “iOS device”...
Page 141 The Camcorder’s Wi-Fi Functions Android Devices • Install the CameraAccess app and use your smartphone or tab- let as a remote control to record with the camcorder (A 145). You can even stream video from the camcorder and record it directly on your Android device.
Page 142 • Connecting the camcorder to an access point (home network) connected to the Internet, you can also share recordings on CANON iMAGE GATEWAY and enjoy a number of Web ser- vices, including uploading recordings to Facebook and YouTube (A 154).
Page 143 The Camcorder’s Wi-Fi Functions ■ Before Using Wi-Fi Functions Based on the function, the camcorder will wirelessly connect directly to a Wi-Fi-enabled device, such as a smartphone, or to a Wi-Fi network via an access point (wireless router)*. After select- ing the function you want to use, follow the onscreen directions to connect the camcorder.
Page 144 The Camcorder’s Wi-Fi Functions • We recommend inserting a fully charged battery pack or using the optional CA-110 Compact Power Adapter when using Wi-Fi functions. • When using the camcorder’s Wi-Fi functions, do not cover the front left corner of the camcorder with your hand or other object.
Page 145: Wireless Connections Without An Access Point
Wireless Connections Without an Access Point Wireless Connections Without an Access Point Using an iOS or Android Device as a Remote Control Using the CameraAccess app* for iOS devices and Android™ devices, you can control the camcorder from a distance while you view the camcorder’s image on the device’s screen.
Page 146 Wireless Connections Without an Access Point • Before you perform this procedure for the first time, download and install the CameraAccess app on your iOS/Android device. The app can be downloaded for free from the following Web sites. App Store: http://appstore.com/cameraaccess Google Play™: http://play.google.com/store/apps/...
Page 147 Wireless Connections Without an Access Point iOS/Android device: In the Wi-Fi settings screen, turn on Wi-Fi and select the network name that appears on the camcorder’s screen (step 2). If necessary, enter the password that appears on the camcorder’s screen. •...
Page 148: Remote Browse: Viewing Recordings Using A Web Browser On An Ios Or Android Device
Wireless Connections Without an Access Point • While commands are being sent from the iOS/Android device to the camcorder (start/stop video recording, photo recording, field of view change), you may notice brief stops in the live view image displayed on the iOS/ Android device.
Page 149 Wireless Connections Without an Access Point * Depending on the device, OS, browser and video quality, you may not be able to play back or save recordings. For details, visit your local Canon Web site. Shooting mode Playback I J L K ’...
Page 150 Wireless Connections Without an Access Point iOS/Android device: Start the Web browser. iOS/Android device: Enter the URL that appears on the camcorder’s screen into the Web browser’s address bar. • When the Wi-Fi connection is correctly established, the Remote Browse screen will appear. •...
Page 151: Saving Recordings And Uploading Movies To The Web Using An Ios Device
Wireless Connections Without an Access Point • Long scenes, whose video data exceeds 4 GB, will be recognized as multiple files on other devices. • For details about Wi-Fi connections on computers and other devices, refer to the instruction manual of the OS, computer or device used.
Page 152 Wireless Connections Without an Access Point Camcorder: From any index screen, set the camcorder to connect with the iOS device. > > > [— Wi-Fi] [6 Movie Uploader] [OK] • The camcorder’s SSID (network name) and password will appear. • The camcorder will be ready to connect with the iOS device.
Page 153 • The procedure above may differ depending on the ver- sion of iOS you are using. • For details about the Movie Uploader app, visit PIXELA’s Web site. http://www.pixela.co.jp/oem/canon/e/movieuploader/ • Long scenes, whose video data exceeds 4 GB, will be recognized as multiple files on other devices.
Page 154: Wireless Connections Using An Access Point
Access Point Sharing Recordings with CANON iMAGE GATEWAY After you register for CANON iMAGE GATEWAY*, you will be able to access various Web services**. You will be able to upload movies and photos to online albums, share links to the...
Page 155 Wireless Connections Using an Access Point CANON iMAGE GATEWAY CANON iMAGE GATEWAY is a Web site that provides vari- ous photo-related services for owners of qualified Canon products. After you complete the free registration online, you can use the Web services, create online photo albums, and more.
Page 156 ■ Setting the Desired Web Services in the Cam- corder Using the supplied software CameraWindow, log in to CANON iMAGE GATEWAY and set the Web services you want to use. Refer to ‘CameraWindow User Guide’ for details on using the software.
Page 157 • Follow the onscreen instructions to register the services you want to use. You will need the account information (user name, password, etc.) to register some services. • CANON iMAGE GATEWAY and all other selected Web services will be set in the camcorder and the CameraWin- menu screen will appear.
Page 158: Sharing Your Recordings Using Web Services
Wireless Connections Using an Access Point • You cannot set multiple accounts for Web services other than e-mail. ■ Sharing Your Recordings Using Web Services Conveniently share your recordings with family and friends using Web services. Shooting mode Playback I J L K ’...
Page 159 Wireless Connections Using an Access Point Select the desired Web service. • When you select (e-mail), the list of registered e-mail addresses will appear. Select the e-mail addresses to which you want to send an e-mail notification. Select whether you want to upload MP4 movies, pho- tos or video snapshot scenes.
Page 160 Wireless Connections Using an Access Point Checking your uploads using CANON iMAGE GATEWAY Library You can use the CANON iMAGE GATEWAY Library screen to see the movies and photos you uploaded. You can also check what files you have sent and the various settings for the Web services.
Page 161: Wireless Playback On A Computer
Wireless Connections Using an Access Point Wireless Playback on a Computer Using the Media Server function, you can wirelessly view your movies and photos on your computer or similar device. You will need an access point connected to your home network and software installed on your computer that can play back movies and photos from a media server.
Page 162 SSID, connection protocol, and the camcorder’s IP address and MAC address. Computer: Start your preferred media player software and select your camcorder’s model name (Canon VIXIA mini) from the list of media servers. • On standalone media players and other devices, connect the device to the home network and select your cam- corder’s model name from the list of media servers.
Page 163: Wi-Fi Connection Using An Access Point
Wireless Connections Using an Access Point > Camcorder: Touch [End] [OK] when finished. • Depending on the access point’s (wireless router’s) set- tings and capabilities, playback may take time to start or may not appear smooth. For details, refer to Trou- bleshooting (A 207).
Page 164 Wireless Connections Using an Access Point Shooting mode Playback I J L K ’ From any index screen, open the [— Network Setup] screen. > > > [— Wi-Fi] [w Check/Edit Settings] [Access > Point Connection Settings] [Not configured] Touch the desired setup method. •...
Page 165 Wireless Connections Using an Access Point [WPS: PIN Code]* Access the access point’s configuration screen using your Web browser. The camcorder will give you a PIN code, which you will enter into the browser. You will need a WPS-compatible router and a computer or other device connected to it.
Page 166 Wireless Connections Using an Access Point ■ Wi-Fi Protected Setup (WPS) If your access point is WPS-compatible (bears the logo shown below), connecting the camcorder to it can be very easy. If you cannot successfully connect the camcorder using WPS, try using the [Search for Access Points] method.
Page 167 Wireless Connections Using an Access Point Within 2 minutes, touch [OK] on the camcorder’s screen. • The camcorder will connect to the access point. • You can touch [Stop] and then [OK] to interrupt the Wi-Fi Protected Setup while it is in progress. •...
Page 168: Searching For Access Points
Wireless Connections Using an Access Point ■ Searching for Access Points After you touch [Search for Access Points], the camcorder will take a few seconds to detect access points available in the vicinity and will display the first one. Make a note in advance of the network name (SSID) and password (encryption key) of the access point you want to use.
Page 169 Wireless Connections Using an Access Point Touch [OK] to save the configuration. • If you were in the process of performing another proce- dure, the camcorder will automatically connect to the access point. Return to the procedure of the function you were previously using: Step 2 in Sharing Your Recordings Using Web Services...
Page 170: Using The Virtual Keyboard
Wireless Connections Using an Access Point Using the virtual keyboard When you need to enter text for various settings, touch the text field and a virtual keyboard will appear on the screen. The illustration below explains the various keys you can use. Switch between letters and numbers/special charac- ters.
Page 171: Manual Setup
Wireless Connections Using an Access Point ■ Manual Setup Perform this procedure to manually configure the wireless con- nection settings. This may be necessary, for example, if your access point’s network name (SSID) cannot be detected due to the stealth function being enabled. Manual setup is for advanced users of Wi-Fi networks.
Page 172 Wireless Connections Using an Access Point To enter the [IP Address] field, touch [0.0.0.0]. Touch the first field and touch [Í]/[Î] to change the value. Change the rest of the fields in the same way and touch [OK]. Enter the [Subnet Mask] field in the same way and touch [Next].
Page 173: Viewing And Changing Wi-Fi Settings
Wireless Connections Using an Access Point • The Wi-Fi functions available and the setup method will vary depending on the specifications and characteris- tics of the Wi-Fi network you want to use. Viewing and Changing Wi-Fi Settings When the camcorder is connected to an access point or to a Wi-Fi-enabled device, you can view the Wi-Fi connection set- tings and even change them, if necessary.
Page 174 Wireless Connections Using an Access Point > > [Edit] [OK] [OK] • The next time you make a wireless connection, you will need to change the Wi-Fi settings on the iOS/Android device. > Touch [K] [X] to close the menu. To view the access point’s connection settings Touch [Access Point Connection Settings].
Page 175 Wireless Connections Using an Access Point > Touch [K] [X] to close the menu. Glossary This is a glossary of some of the basic terms used fre- quently in this chapter. The documentation for your access point may also contain a glossary you can refer to. Access Point A wireless access point (WAP) is a device that allows wire- less devices, like your camcorder, to connect to a wired net-...
Page 176: Additional Information
Additional Information Appendix: Menu Options Lists This section contains tables of all the camcorder’s menu set- tings and setting options for your reference. Appendix: Onscreen Icons and Displays This section explains the icons and displays that appear on the camcorder’s various screens, with reference pages to the relevant functions.
Page 177: General Information
General Information This section contains information about optional accesso- ries that can be used with the camcorder and ends with the comprehensive list of technical specifications.
Page 178: Appendix: Menu Options Lists
Appendix: Menu Options Lists Appendix: Menu Options Lists The functions that are available depend on the camcorder’s oper- ating mode. On the camcorder’s screen, menu items not available appear grayed out. For details about how to select an item, refer Using the Menus (A 45).
Page 179 Appendix: Menu Options Lists 0 (Home) Menu (cont.) Menu item Setting options [Shooting Mode] (A 90) Auto], [ Food and Fashion], [I Sports], [J Night Scene], [L Beach], [K Snow], [ Macro], [’ Programmed AE] Flip/Rotate Image] (A 108) Mirror Image]: [On], [Off] Detect Orientation]: [On], [Off] [<...
Page 180: [1 Other Settings] Menus
Appendix: Menu Options Lists [Edit] Functions in Playback Modes Button Setting options [Convert to MP4] (A 128) [Delete] (A 76, 81) [y] or [¦] index screen: <folder name>, [Select], [All Scenes] [}] index screen: <folder name>, [Select], [All Photos] During playback pause: [This Scene] In single photo view: [¸...
Page 181 Appendix: Menu Options Lists p Camera Setup (recording mode only) (cont.) Menu item Setting options [Frame Rate] – [½ 30P], [» 24P] [Face Detection & Tracking] (A 117) }], [j Off] [i On [Auto Backlight Correction] – On], [j Off] [Flicker Reduction] –...
Page 182 Appendix: Menu Options Lists [Frame Rate]: Sets the frame rate (the number of frames recorded per second). Changing the frame rate will change how smooth movement looks in your movies. You can select 30P (30 frames per second, progressive) or a cinema-like 24P (24 frames per second, progressive).
Page 183 Appendix: Menu Options Lists Playback Setup (playback mode only) Menu item Setting options [Video Snapshot Length] (A 100, 120) [C 2 sec], [D 4 sec], [F 8 sec] [Slideshow Transition] (A 84) [j Off], [k Dissolve], [l Slide Image] [Auto Rotate] –...
Page 184: Display Setup
Appendix: Menu Options Lists t Display Setup Menu item Setting options [Onscreen Markers] – Off], [ 16:9 (White)], [ 16:9 (Gray)], [3 Level (White)], [4 Level (Gray)], [5 Grid (White)], [6 Grid (Gray)] [Display Date/Time] – [i On], [j Off] [Output Onscreen Displays] –...
Page 185 Appendix: Menu Options Lists [Onscreen Markers] (recording mode only): You can display 16:9 area markers, a grid, or a horizontal line at the center of the screen. Use the markers as a reference to make sure your sub- ject is framed correctly (vertically and/or horizontally). •...
Page 186 Appendix: Menu Options Lists • Changing the brightness of the LCD screen does not affect the brightness of your recordings or the brightness of the play- back image on a TV. • Using the [H Bright] setting will shorten the effective usage time of the battery pack.
Page 187: System Setup
Appendix: Menu Options Lists q System Setup Menu item Setting options [Language H] (A 38) ], [Dansk], [Deutsch], [ ], [English], [Español], [Français], [Italiano], [Magyar], [Melayu], [Nederlands], [Norsk], [Polski], [Português], [ ], [Suomi], [Svenska], [Türkçe], ], [ ], [ ], [ ], [ ], [ ], [...
Page 188 Appendix: Menu Options Lists q System Setup (cont.) Menu item Setting options [Notification Sounds] – [÷ High Volume], [ø Low Volume], [j Off] [File Numbering] – [m Reset], [n Continuous] [Auto Power Off] – On], [j Off] [SP-V1 Mode] – [i On], [j Off] [Initialize...
Page 189 Appendix: Menu Options Lists [Available Space in Memory] (recording mode only)/ [Used Space in Memory] (playback mode only): Displays a screen where you can verify how much of the memory card is currently available for recording or how much is in use (ª indi- cates photos).
Page 190 Appendix: Menu Options Lists • We recommend using the [n Continuous] setting. • Folders can contain up to 500 files (movies and photos com- bined). • File numbers consist of 7 digits, for example “101-0107”. The 3 digits before the hyphen indicate the folder where the file is saved and can range from 100 to 999.
Page 191 Appendix: Menu Options Lists • Approximately 30 seconds before the camcorder shuts off, [Auto Power Off] will appear. Operating any of the camcorder’s controls while the message is displayed will prevent the cam- corder from shutting off. [SP-V1 Mode]: Activates an alternative operation mode that allows the camcorder to be used when it is protected by the optional SP-V1 Splashproof Case.
Page 192: Appendix: Onscreen Icons And Displays
Appendix: Onscreen Icons and Displays Appendix: Onscreen Icons and Dis- plays Recording Scene counter (hours : minutes : seconds, only while recording) Shooting mode button (A 90) In N mode: Smart AUTO (A 58) Face detection frame (A 117) Exposure compensation (A 114) Face detection (A 117) Orientation detection (A 108)
Page 193 Appendix: Onscreen Icons and Displays Mirror image recording (A 108) White balance (A 112) Memory card operation (A 198) 10 User-selected main subject frame (A 117) 11 Self timer and countdown (A 102) 12 Frame rate (A 182) 13 Remaining battery charge (A 198) 14 Memory card 15 Remaining video recording time (A 198) 16 Video quality (A 87)
Page 194 Appendix: Onscreen Icons and Displays Recording Photos and Special Recording Modes 25 Special recording modes - Interval recording and selected interval (A 94) - Slow motion and selected speed (A 98) - Fast motion and selected speed (A 98) ¦ - Video snapshot and selected video snapshot length (A 100) 26 During interval recording: Number of recordings made so far (A 94)
Page 195 Appendix: Onscreen Icons and Displays Only while recording photos (A 61) 29 Exposure locked 30 Aperture value and shutter speed Only when 1 > > [SP-V1 Mode] is set to [i On] (A 191) 31 [ ] button: Cancel the splashproof case mode 32 [PHOTO] button: Record a photo when the camcorder is in the splashproof case...
Page 196 Appendix: Onscreen Icons and Displays Playing Movies (during playback) 33 Mirror image playback (A 69) 34 Repeat playback (A 69) 35 Slow/Fast motion and playback speed (A 98) - Interval scenes that have not yet been joined (A 94) 36 Playback control buttons (A 67) 37 Scene playback time 38 Scene number 39 File number (A 189)
Page 197 Appendix: Onscreen Icons and Displays Viewing Photos 46 8 51 52 44 [Edit] button: Open the [Edit] panel (A 180) 45 Shooting information 46 Shooting mode (A 90) 47 Current photo / Total number of photos 48 File size 49 Photo size (A 89) 50 [Ð] button: Slideshow (A 84) 51 [f] button: Return to the [}] index screen (A 72) 52 [h] button: Photo jump (A 74)
Page 198 Appendix: Onscreen Icons and Displays 9 Memory card operation Ü Record, Ñ Record standby, Ð Playback, Ý Playback pause, × Fast playback, Ø Fast reverse playback, Õ Slow playback, Ö Slow reverse playback, Ó Frame advance, Ô Frame reverse. 13 Remaining battery charge (in red) •...
Page 199: Trouble
Sometimes what you think is a malfunction of the camcorder may have the simplest of solutions - please read the “CHECK THIS FIRST” box before going on to the more detailed problems and solutions. Consult your dealer or a Canon Service Center if the problem persists. CHECK THIS FIRST Power supply •...
Page 200: Power Source
- Charge the battery pack in temperatures between approxi- mately 0 °C and 40 °C (32 °F and 104 °F). - If you are using a battery pack recommended by Canon for use with this camcorder, there may be a problem with the battery pack.
Page 201 Trouble? Recording Touching [Ü] will not start recording. - You cannot record while the camcorder is writing previous recordings onto the memory card (while the ACCESS indica- tor is on or flashing). Wait until the camcorder has finished. - The memory card is full. Delete some recordings (A 76, 81) or initialize the memory card (A 42) to free some space.
Page 202 If the cam- corder becomes unusually hot or it becomes hot after using it only for a short while, it may indicate a problem with the camcorder. Consult a Canon Service Center. Playback Cannot delete a scene.
Page 203 Trouble? Deleting scenes takes longer than usual. - When the memory card contains a large number of scenes, some operations may take longer than usual. Save your recordings (A 131) and initialize the memory card (A 42). Cannot capture a video snapshot scene from a movie. - You cannot capture video snapshot scenes from scenes recorded or edited using another device.
Page 204: Picture And Sound
Trouble? appears (in red) on the screen. - A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory card. Initialize the memory card if the display does not change back to normal. and [End] appear (in red) on the screen. - The memory card is full.
Page 205 Trouble? - Remove the battery pack and insert it correctly. Abnormal characters appear on the screen and the cam- corder does not operate properly. - Remove the battery pack and insert it after a few moments. Video noise appears on screen. - Keep a distance between the camcorder and devices that emit strong electromagnetic fields (plasma TVs, cellular phones, etc.).
Page 206: Connections With External Devices
Trouble? Memory Card and Accessories Cannot insert the memory card. - The memory card was not facing the correct direction. Turn the memory card over and insert it. Cannot record on the memory card. - The memory card is full. Delete some recordings (A 76, 81) to free some space or replace the memory card.
Page 207 Trouble? - The camcorder may be set to recording mode. Disconnect the optional HTC-100 High Speed HDMI cable, set the cam- corder to playback mode and then restore the connection. - Video and audio will not be output from the camcorder while Wi-Fi functions are in use.
Page 208 Trouble? - The effective communication range between the camcorder and access point may vary depending on the strength of the wireless signal. Try using the camcorder closer to the access point. - Cordless phones, microwave ovens, refrigerators and other appliances in the line of sight between the access point and the camcorder may interfere with the wireless signal.
Page 209 The Remote Browse screen does not appear correctly on the Web browser. - The device, operating system or Web browser used may not be supported. For the latest information about supported systems, visit your local Canon Web site.
Page 210: List Of Messages
List of Messages for Web Services (A 223) for messages related to Web services when using CANON iMAGE GATEWAY. Back up recordings regularly - This message may appear when you turn on the cam- corder. In the event of a malfunction, recordings may be lost so back up your recordings regularly.
Page 211 - There is a problem with the memory card. If this message appears often without apparent reason, contact a Canon Service Center. Cannot play back Check the memory card - There is a problem with the memory card.
Page 212 - You cannot capture video snapshot scenes from scenes recorded or edited using another device. - There is a problem with the memory card. If this message appears often without apparent reason, contact a Canon Service Center. Cannot record Check the memory card - There is a problem with the memory card.
Page 213 Trouble? Cannot save the canvas - Cannot save your [Pens and Stamps] drawings on the memory card. Save your recordings (A 131) and initialize the memory card (A 42). Cannot trim the scene - Scenes that were recorded or edited with other devices cannot be trimmed with this camcorder.
Page 214 Trouble? File name error - The folder and file numbers have reached their maximum value. Set 1 > q> [File Numbering] to [Reset] and delete all the movies (A 76) and photos (A 81) on the memory card or initialize it (A 42). Initialize only using the camcorder - There is a problem with the file system that prevents accessing the memory card.
Page 215 Trouble? Memory card writing error Attempt to recover the data? - This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing to the memory card. Select [Recover] to try to recover the recordings. If you inserted a memory card that contains scenes recorded using another device, we recommend that you select [No].
Page 216 Trouble? Recording was stopped due to insufficient write speed of the memory card - The data transfer rate was too high for the memory card in use and the recording was stopped. Replace the memory card with one rated SD Speed Class 10. - After repeatedly recording, deleting and editing scenes (fragmented memory), it will take longer to write data on the memory card and recording may stop.
Page 217 Trouble? Task in progress. Do not disconnect the power source. - The camcorder is updating the memory card. Wait until the operation ends and do not remove the battery pack. This photo cannot be displayed - You may not be able to display photos taken with other devices or image files created or edited on a computer.
Page 218 Trouble? List of Messages for Wi-Fi Functions Refer also to the instruction manual of your access point and other devices you will use. Another user is already controlling the camcorder. Try again later. - This message appears on the screen of the Wi-Fi device. Multiple Wi-Fi devices are trying to connect with the cam- corder.
Page 219 Unable to access configuration files - Turn off the camcorder. After a short while, turn it on again. If the problem persists contact a Canon Service Center. Unable to complete WPS. - Turn off the camcorder and access point (wireless router).
Page 220 Trouble? Unable to complete WPS. Try the operation again. - Some access points require pressing and holding the Wi-Fi Protected Setup (WPS) button. For details, refer to the instruction manual of your access point. - Make sure to touch [OK] on the camcorder’s screen within 2 minutes of activating the Wi-Fi Protected Setup signal on the access point, whether by pressing the button or by entering the PIN code.
Page 221 Trouble? Unable to obtain an IP address - If you are not using a DHCP server, connect using the [Man- ual Setup] option and enter the IP address using the [Man- ual] option (A 171). - Turn on the DHCP server. If it is already on, make sure it is functioning properly.
Page 222 Trouble? Wi-Fi connection terminated - Cordless phones, microwave ovens, refrigerators and other appliances may interfere with the wireless signal. Try using the camcorder in a location farther away from such appli- ances. - The camcorder may not be able to connect to the access point if too many devices are accessing it.
Page 223: List Of Messages For Web Services
- Turn off the camcorder and access point (wireless router). After a short while, turn them on again and perform the Wi- Fi network setup again. If the problem persists contact a Canon Service Center. List of Messages for Web Services Check network settings - The network settings in the camcorder are not correctly configured.
Page 224 Server busy Try again later - The CANON iMAGE GATEWAY server is busy due to a high number of users trying to connect to the server. End the Wi- Fi connection and try again later.
Page 225 Web service. Check the recording before sending. Try again - An error occurred when connecting to the CANON iMAGE GATEWAY server or the server is temporarily down. End the Wi-Fi connection and try again.
Page 226: Do's And Don'ts
(A 131), and save them on a regular basis. This will protect your important recordings in case of damage and create more free space on the memory card. Canon shall not be liable for any data loss. • Do not carry the camcorder by the LCD panel. Be careful when closing the LCD panel.
Page 227 Do’s and Don’ts blistering. The use of a tripod is recommended for people with circulation problems or very sensitive skin, or when using the camcorder in very hot places. • Do not leave the camcorder in places subject to high tempera- tures (like the inside of a car parked under direct sunlight), or high humidity.
Page 228 Do’s and Don’ts • Be careful of heat generated by lighting equipment. • Do not disassemble the camcorder. If the camcorder does not function properly, consult qualified service personnel. • Handle the camcorder with care. Do not subject the cam- corder to shocks or vibration as this may cause damage.
Page 229: Battery Pack
Do’s and Don’ts Battery Pack DANGER! Treat the battery pack with care. • Keep it away from fire (or it might explode). • Do not expose the battery pack to temperature higher than 60 °C (140 °F). Do not leave it near a heater or inside a car in hot weather.
Page 230 Data may be corrupted or lost due to memory card defects or exposure to static electricity. Canon shall not be liable for lost or corrupted data. • Do not touch or expose the terminals to dust or dirt.
Page 231 Do’s and Don’ts Built-in Rechargeable Lithium Battery The camcorder has a built-in rechargeable lithium battery to keep the date/time and other settings. The built-in lithium battery is recharged while you use the camcorder; however, it will dis- charge completely if you do not use the camcorder for about 3 months.
Page 232: Maintenance/Others
Maintenance/Others Maintenance/Others Cleaning Camcorder Body • Use a soft, dry cloth to clean the camcorder body. Never use chemically treated cloths or volatile solvents such as paint thinner. Lens • Remove any dust or dirt particles using a non-aerosol type blower brush.
Page 233: Condensation
Maintenance/Others Condensation Moving the camcorder rapidly between hot and cold tempera- tures may cause condensation (water droplets) to form on its internal surfaces. Stop using the camcorder if condensation is detected. Continued use may damage the camcorder. Condensation may form in the following cases: •...
Page 234: Using The Camcorder Abroad
You can use the supplied battery charger to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult a Canon Service Center for infor- mation on plug adapters for overseas use. Playback on a TV Screen You can only play back your recordings on TVs compatible with the NTSC system or 60-Hz digital TV broadcasts.
Page 235: General Information
General Information General Information Optional Accessories The following optional accessories are compatible with this cam- corder but their availability may differ from area to area. Select accessories are described in more detail in the following pages. NB-4L Battery Pack CB-2LV Battery CA-110 Compact Charger* Power Adapter...
Page 236 General Information SP-V1 Splashproof Case Call or visit your local retailer/dealer for genuine Canon video accessories. You can also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.S.A. Information Center. Use of genuine Canon accessories is recommended.
Page 237 General Information Battery Packs When you need extra battery packs, use only the NB-4L. CB-2LV or CB-2LVE Battery Charger Use the battery charger to charge the battery packs. Fully charging a battery pack will take approximately 1 hour 30 min- utes.
Page 238 General Information This mark identifies genuine Canon video acces- sories. When you use Canon video equipment, we recommend Canon-brand accessories or products bearing the same mark.
Page 239: Specifications
General Information Specifications VIXIA mini — Values given are approximate figures. System • Recording System Movies: Video: MPEG-4 AVC/H.264 Audio: MPEG-2 AAC-LC (2ch) Photos: DCF (Design rule for Camera File system), compatible with Exif* Ver. 2.3 Image compression: JPEG * This camcorder supports Exif 2.3 (also called “Exif Print”). Exif Print is a standard for enhancing the communication between camcorders and printers.
Page 240 General Information • Maximum Recording Time Commercially available 16 GB memory card 24 Mbps: 1 hr. 25 min. 17 Mbps: 2 hr. 5 min. 4 Mbps: 8 hr. 40 min. Commercially available 32 GB memory card 24 Mbps: 2 hr. 55 min. 17 Mbps: 4 hr.
Page 241 General Information • Lens f=2.7 mm, F/2.8 35mm-equivalent focal length (ultra wide) : Movies: 16.8 mm Photos: 15.4 mm 35mm-equivalent focal length (close-up) : Movies: 35.0 mm Photos: 32.1 mm • Lens Configuration 6 elements in 5 groups (1 double-sided aspheric element) •...
Page 242 General Information • Size of Photos 4000x3000 pixels, n 1920x1440 pixels, 640x480 pixels Photos captured from movies: 1920x1080 pixels Terminals • USB Terminal: mini-B, Hi-Speed USB • HDMI Terminal: HDMI Mini Connector; output only Wi-Fi • Standard Complies with the IEEE 802.11b/g/n protocol; Wi-Fi Protected Setup (connection methods: WPS button, PIN code) •...
Page 243 General Information • Dimensions [W x H x D] (excluding the wrist strap) 76 x 22 x 96 mm (3.0 x 0.9 x 3.8 in.) • Weight (camcorder body only) 160 g (5.6 oz.) NB-4L Battery Pack • Battery type Rechargeable lithium ion battery •...
Page 244 General Information • Operating temperature : 0 – 40 °C (32 – 104 °F) • Dimensions : 53.0 x 86.0 x 19.5 mm (2.1 x 3.4 x 0.77 in.) • Weight : 60 g (2.1 oz.) Weight and dimensions are approximate. Errors and omissions excepted.
Page 245: Index
Index CANON iMAGE ....154 GATEWAY Abroad, using the Capturing photos/video ....234 camcorder snapshot scenes from a ....54 AUTO mode ......120 movie ....183 Auto rotate ..128 Cinema-look filters Automatic backlight ......57 Close-up ....182 correction ....233 Condensation Connections to external ......
Page 246 ......81 Photos ..108 Image rotation/flipping Initializing a .....180 Edit panel ....42 memory card .....210 Error messages ..... 94 Interval recording Exposure .....114 compensation ..185 LCD screen dimmer ... 44 LCD touch screen ....117 Face detection , 151 .....137 Facebook ....98...
Page 247 Resetting all camcorder ...... 191 settings .....192 Onscreen icons ..108 Orientation detection Other Settings ..131 Saving recordings , 180 ....49 menus ..... 102 Self timer ....24 Serial number ....90 Shooting mode P (Programmed AE shooting ..90 ......90 Shooting mode button mode)
Page 248 Turning off notification Video , 120 ......189 .... 100 sounds snapshot ......67 Volume ....57 Ultra wide angle ....112 Uploading White balance , 151 , 154 ..137 ....138 movies Wi-Fi functions , 126 ..124 USB terminal , 154 ....
Page 249 CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY FOR THE UNITED STATES The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon USA”) with respect to Canon Consumer Digital Video Equipment (the “Equipment”) purchased in the United States. This limited warranty is only effective upon presentation of your Bill of Sale or other proof of purchase.
Page 250 These uses are covered only by such specific warranty as Canon may issue with such sales. This Limited Warranty does not apply to accessories or consumables for the Equipment, which are sold “AS IS”, without warranty of any kind by Canon USA.
Page 251 Canon Consumer Digital Video Equipment (the “Equipment”) purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Equipment to a Canon Service Facility when repairs are required.
Page 252 Any recovery under this limited warranty shall not exceed the purchase price of the equipment. Canon Canada does not assume or authorize any other per- son to assume for Canon Canada any other liability with respect to this equipment.
Page 253 CANADA CANON CANADA INC. 6390 Dixie Road, Mississauga, ON L5T 1P7 ❖ If you have any questions, call the Canon Canada Information Center toll free (in Canada only) at 1-800-OK-CANON (1-800-652-2666). ❖ Si vous avez des questions, veuillez téléphoner 1-800-OK-CANON (1-800-652-2666, sans frais au Canada seulement).

Canon VIXIA mini Instruction Manual

Preparations

Basic Recording and Playback

Advanced Functions

External Connections

Wi-Fi Functions

Additional Information

Appendix: Menu Options Lists

Appendix: Onscreen Icons and Displays

Quick Links

Related Manuals for Canon VIXIA mini

Summary of Contents for Canon VIXIA mini

Table of Contents