Table of Contents
Advertisement
Connections
How to remove terminal cover
A terminal cover is attached to the input and output terminals to protect them from dust and water.
To remove the terminal cover to connect a cable or other item, remove all 12 screws from the terminal cover.
Opening the terminal cover with some screws left on will damage the terminal cover.
AC cord connection
Notes:
• After connection, check the cable is pulled out along the groove without overlapping, then tighten the all 12 screws
to attach the terminal cover correctly. Otherwise water enters inside and causes re, electric shock and product
damage.
• Make sure to read the "Terminal cover" (page iii) section for the correct handling of the terminal cover to use the
product properly.
AC cord xing
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on both the left
and right sides.
Remove the terminal
cover
(See above)
Unplug the AC cord
Unplug the AC cord pressing the two knobs.
Note:
When disconnecting the AC cord, be absolutely
sure to disconnect the AC cord plug at the
socket outlet rst.
Remove the screws (12) to
take out the terminal cover.
9
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
