Basic Menu Operations
Menu name
Item to be set
1
Press the MENU SELECT button
repeatedly to select the menu.
Each time you press the MENU
SELECT button, the menu changes in
the following order:
UTILITY, RX1, TX1, RX2, TX2,
UTILITY
2
Press the + or – button repeatedly until
the function to be set appears.
Each time you press the + or – button,
the item to be set changes.
For details, see "Menu hierarchy" on
page 17.
3
Hold down the SET button until the
item to be set flashes.
4
Press the + or – button to change the
setting.
5
Press the SET button to enter the
setting.
Note
When the tuner is turned off, the menus
corresponding to that tuner are not
displayed.
18
UTILITY Menu
Function name
UTILITY Menu
For details on menu operation, see "Basic Menu
Operations" on page 18.
The UTILITY menu includes items related
to the basic receiver settings, including
meter displays.
These functions and parameters are
explained here. Underlined items are the
factory setting.
Menu name
Function name
Item to be set
Note
The functions indicated by "ADAPTER"
(from the AES/EBU LVL@MIC function
to the ANALOG OUTPUT1 function) in
the upper-right corner are related to the
AES/EBU output when the receiver is used
in conjunction with the optional DWA-
01D/F01D wireless adapter. The function
does not operate even when used with a
compatible Sony slot-in type camcorder.
Selecting the AES/EBU
Output Reference Level
(AES/EBU LVL@MIC)
Selects reference level for the AES/EBU
output of the optional DWA-01D/F01D
wireless adapter.
The setting of this function is invalid when
the audio input level of the sending
transmitter is set to LINE (–20 dBFS
headroom signal).