Auto Reassign Function - Hitachi HTS541010G9AT00 - Travelstar 100 GB Hard Drive Specifications
2.5 inch serial ata hard disk drive
Hide thumbs
Also See for HTS541010G9AT00 - Travelstar 100 GB Hard Drive:
- Datasheet (2 pages) ,
- Specifications (227 pages) ,
- Quick installation manual (2 pages)
Table of Contents
Advertisement
10.13.1 Auto Reassign Function
The sectors that show some errors may be reallocated automatically when specific conditions are met. The spare
tracks for reallocation are located at regular intervals from Cylinder 0. The conditions for auto-reallocation are
described below.
Non-recovered write errors
When a write operation can not be completed after the Error Recovery Procedure (ERP) is fully carried out, the
sector(s) are reallocated to the spare location. An error is reported to the host system only when the write cache is
disabled and the auto reallocation fails.
If the number of available spare sectors reaches 16 sectors, the write cache function will be disabled automatically.
Non-recovered read errors
When a read operation fails after a defined ERP is fully carried out, a hard error is reported to the host system. This
location is registered internally as a candidate for the reallocation. When a registered location is specified as a target
of a write operation, a sequence of media verifications is performed automatically. When the result of this
verification meets the criteria, this sector is reallocated.
Recovered read errors
When a read operation for a sector fails once and then is recovered at the specific ERP step, this sector of data is
reallocated automatically. A media verification sequence may be run prior to the relocation according to the
predefined conditions.
Travelstar 5K100 (Serial ATA) Hard Disk Drive Specification
68
Hide quick links:
Advertisement
Table of Contents
