Control Settings - GE GLD6860NSS Owner's Manual
Ge dishwasher owner's manual
Hide thumbs
Also See for GLD6860NSS:
- Owner's manual (17 pages) ,
- Owner's manual (19 pages) ,
- Owner's manual (16 pages)
Table of Contents
Advertisement
About the dishwasher control panel.
GHDA600 Series, GLD6000 Series)
You can locate your model number on the tub wall just inside the door. Throughout this manual, features and
appearance may vary from your model.
Control Settings
Status Indicator Lights
1
The Status display tells you what's happening while the dishwasher is in operation and may flash, indicating a
malfunction. The lights will come ON indicating the sequence of operation the dishwasher is in.
SENSING
(on some models) The dishwasher will adjust the selected cycle to achieve optimal performance.
WASHING
(on some models)
RINSING
(on some models)
DRYING
(on some models)
SANITIZED
Time Remaining Display
2
During operation, the display shows the minutes remaining until the cycle is complete. The display may adjust the
remaining time while the sensing light is on. The time displayed at the start of each cycle may change from the
factory setting as the unit customizes itself to home use. During a delay start, the display will show hours of time
remaining until the cycle starts.
Cycles
3
The light above the selected pad will be ON to indicate which cycle has been selected.
This dishwasher is equipped with a dirt and temperature sensor. Cycle length and time will vary depending on the
soil level and temperature.
ANTI-BACTERIAL Heavy 8.5 gal., 84 min.
or SANI WASH
POTS
& PANS
NORMAL WASH
4
3
Displayed while the sensor is measuring the amount of soil and temperature of water.
Displayed during prewash and main wash periods.
Displayed during rinse periods.
Displayed during HEATED DRY.
Displayed when cycle has met sanitization conditions. Light remains ON until door is opened.
CLEAN
Displayed when a wash cycle is complete. The light stays ON as a reminder that the dishes are
clean until the door is relatched or until another cycle is selected.
(on some models)
Medium 7.3 gal., 78 min.
Light 6.1 gal., 75 min.
This cycle raises the water temperature in the final rinse to sanitize your dishware. The cycle
length will vary depending on the temperature of your inlet water.
NOTE: The Anti-Bacterial cycle is monitored for sanitization requirements. If the cycle is
interrupted during or after the main wash portion or if the incoming water temperature is so low
that adequate water heating cannot be achieved, the sanitizing conditions may not be met. In
these cases, the sanitized light will not illuminate at the end of the cycle.
NOTE: NSF-certified residential dishwashers are not intended for licensed food establishments.
Heavy 10.9 gal., 102 min.
Medium 8.5 gal., 78 min.
Light 7.3 gal., 73 min.
This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils.
Everyday dishes are safe to be used in this cycle.
Heavy 8.5 gal., 65 min.
Medium 7.3 gal., 60 min.
Light 4.9 gal., 49 min.
This cycle is for medium/heavily soiled dishes and glassware.
(For models with sensor: EDW6000 Series,
1
4
5
2
Hide quick links:
Advertisement
Table of Contents
