■
Connection to any communication line other than an analog phone line
could cause a PC system failure.
■
■
■
■
■
Never operate your PC on AC power during a thunderstorm. If you see
lightning or hear thunder, immediately turn off the PC. An electric surge
caused by the storm, may result in a system failure, loss of data or
hardware damage.
S-Video out port
LAN jack
■
Do not connect any cable other than a LAN cable to the LAN jack. It
could cause damage or malfunction.
■
Do not connect the LAN cable to a power supply. It could cause
damage or malfunction.
Link indicator
(green)
LAN active indicator
(orange)
Universal Serial Bus
(USB 2.0) ports
External monitor
port
User's Manual
Connect the built-in modem only to ordinary analog phone lines.
Never connect the built-in modem to a digital line (ISDN).
Never connect the built-in modem to the digital connector on a
public telephone or to a digital private branch exchange (PBX).
Never connect the built-in modem to a key telephone system for
residences or offices.
Plug an S-Video cable into this jack for S-Video.
The S-Video cable carries video signal.
Data output depends on the type of device
connected to the S-Video cable.
This jack lets you connect to a LAN. The adaptor
has built-in support for Ethernet LAN (10
megabits per second, 10BASE-T), Fast Ethernet
LAN (100 megabits per second, 100BASE-TX)
and Gigabit Ethernet LAN (1000 megabits per
second, 1000BASE-T) is supported with some
models. It is preinstalled as a standard device in
some markets. The LAN has two indicators.
Refer to Chapter 4,
This indicator glows green when the computer is
connected to a LAN and the LAN is functioning
properly.
This indicator glows orange when data is being
exchanged between the computer and the LAN.
Two Universal Serial Bus ports are on the back
side. Refer to
This external monitor port lets you connect an
external video display. Analog VGA port supports
VESA DDC2B compatible functions.
Operating
Basics, for details.
Left side
section, for details.
The Grand Tour
2-6