Display Transceiver - HP 6125G Command Reference Manual
6125 blade switch series fundamentals command reference
Hide thumbs
Also See for 6125G:
- Command reference manual (426 pages) ,
- Configuration manual (379 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display system-failure to display the exception handling method. In an IRF fabric, this command
displays the exception handling method for all IRF member switches.
Related commands: system-failure.
Examples
# Display the exception handling method.
<Sysname> display system-failure
System failure handling method: reboot
display transceiver
Syntax
display transceiver interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
2: System level
Parameters
interface [ interface-type interface-number ]: Displays the key parameters of the transceiver module in the
specified interface. The interface-type interface-number argument specifies an interface by its type and
number. If no interface is specified, the command displays the key parameters of all transceiver modules.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display transceiver to display key parameters of transceiver modules.
Examples
# Display the key parameters of the transceiver module in interface GigabitEthernet 1/0/3.
<Sysname> display transceiver interface gigabitethernet 1/0/3
GigabitEthernet1/0/3 transceiver information:
Transceiver Type
Connector Type
Wavelength(nm)
: 1000_BASE_SX_SFP
: LC
: 850
146
Advertisement
Table of Contents
