Configuring None Authentication For Modem Dial-In; Configuring Password Authentication For Modem Dial-In - HP 6125G Configuration Manual
Fundamentals configuration guide
Hide thumbs
Also See for 6125G:
- Command reference manual (426 pages) ,
- Configuration manual (379 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
command. The connection is terminated if "OK" is displayed. You can also terminal the connection by
clicking
IMPORTANT:
Do not directly close the HyperTerminal. Doing so can cause some modems to stay in use, and your
subsequent dial-in attempts will always fail.
Configuring none authentication for modem dial-in
Step
1.
Enter system view.
2.
Enter one or more AUX user
interface views.
3.
Enable the none
authentication mode.
4.
Configure common settings
for the AUX user interfaces.
The next time you attempt to dial in to the device, you do not need to provide any username or password,
as shown in
Figure 24 Dialing in to the device without any authentication
Configuring password authentication for modem dial-in
in the HyperTerminal window.
Figure
24.
Command
system-view
user-interface aux first-number
[ last-number ]
authentication-mode none
See
"Configuring common settings
for modem dial-in
(optional)."
47
Remarks
N/A
N/A
By default, modem users can dial
in to the device without
authentication.
Optional.
Hide quick links:
Advertisement
Table of Contents
