HP BL860c Deployment Manual page 65
For integrity servers with linux
Hide thumbs
Also See for BL860c:
- Datasheet (511 pages) ,
- User's & service manual (184 pages) ,
- Installation manual (73 pages)
Table of Contents
Advertisement
Table 6-8 Error Codes (continued)
Code
Error
278-282,
Controller is locked by another
2564
machine or user
268
Error saving Controller
1065-1066
Too many coinciding expansion,
migration, or extension
operations
1110
Controller does not support
license keys
1093
Controller requires physical
drives to set license keys
1114
Controller requires non-failed
physical drives to set license
keys
1111
Invalid license key
1112
Controller has maximum number of
license keys
1110
License key is not a controller
feature license key
2850
Controller does not support Raid
Array ID
2851
Invalid Raid Array ID
1091
Controller does not support SSP
2855
Controller does not support
Logical Drive SSP states. Use
'SSPState' Controller command to
set the Controller SSP state
2856
Controller does not support
Controller SSP state. Use
'LogicalDriveSSPState' Logical
Drive command to set SSP states
for each Logical Drive
2853
Cannot change SSP settings
2854
Invalid SSP Adapter ID
2852
Invalid SSP State
2858
Controller does not support
snapshot resource volume feature
2859
Invalid Resource Volume Owner
Reason
One or more controllers is locked by another machine or user.
There was a problem saving one or more controller
configurations.
This error is the "invalid increase/decrease" in logical drive
offset error. This can happen when too many unsaved
expansions, extensions, or migrations are tried at the same
time.
The controller does not support license key entry or deletion.
The controller requires physical drives for license keys.
The controller requires non-failed physical drives for license
keys.
The entered license key is not a valid license key.
The controller already has the maximum number of license
keys installed.
The entered license key is not a controller feature license key.
The controller does not support Raid Array ID.
The entered Raid Array ID is invalid. The Raid Array ID can
only consist of the following characters: a-z A-Z 0-9 ! @ # * (
) , - _ + : . / [space]. It cannot end with a space character or
exceed the maximum number of characters allowed by the
controller.
The controller does not support SSP.
The Controller does not support Logical Drive SSP states.
Use SSPState controller command to set the Controller SSP
state.
Controller does not support Controller SSP state. Use
LogicalDriveSSPState logical drive command to set SSP
states for each Logical Drive.
The SSP settings cannot be changed for the controller or
logical drive.
The adapter ID is not a valid adapter ID that was detected
by the controller.
The requested SSP State is not a valid SSP state.
The controller does not support the snapshot resource volume
feature.
The specified Resource Volume Owner is not valid. The
Resource Volume Owner should be a valid existing logical
drive ID.
cpqacuxe
65
Advertisement
Table of Contents
