Table of Contents
Advertisement
Selected characters
Audio Input
AV1
AV2
AV3
AV4
Scart Output
RGB1
RGB2 (1st step)
RGB2 (2nd step)
OTHER FEATURES
Automatic Store
Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below.
Menu
Display
Picture
Picture Mode
1 setting is registered.
For every input function and every
Contrast
Picture Mode, 1 setting is
Brightness
registered.
Color
Sharpness
Tint
Color Temperature
Contrast Mode
YNR
CNR
Film Mode
PAL Comb Filter
LTI
CTI
Black Enhancement
Auto Color
Color Temp. Adjust
R Amplitude For every Color Temperature, 1
setting is registered.
G Amplitude
B Amplitude
R Cut Off
G Cut Off
B Cut Off
For every input function and every
Color Management
Picture Mode, 1 setting is
registered.
Magenta 1 setting is registered.
Red
Stereo
L/Mono
DVI-PC
DVI-STB
RGB
Component
Auto
HDTV
SDTV/DVD
Registration condition
Setup hint
This should correspond to the audio signal from the equipment that is
connected to AV1 audio input terminal. If it is monaural audio, set this to
L/Mono.
(Same to AV1)
Not Available (grayed out)
This should correspond to the signal mode of the signal from the
equipment that is connected to RGB1 DVI terminal.
This should correspond to the signal mode of the signal from the
equipment that is connected to RGB2 D-sub terminal.
This step should be set only when [Component] is selected on the 1st
step.
This should correspond to the signal mode of the signal from the
equipment that is connected to RGB2 D-sub terminal.
• Normally, set this to Auto. The signal mode of the input signal will be
automatically recognized.
• If the input signal contains much noise or has a low level at Auto and the
operation is found erratic, set this to match the input signal.
Menu
Display
Picture
Yellow 1 setting is registered.
Green
Cyan
Blue
Color Decoding
-
Red For every Color Temperature, 1
setting is registered.
Green
Color For every input function and every
Picture Mode, 1 setting is
Tint
registered.
Function
Video Power Save
1 setting is registered.
Setup
System
1 setting is registered.
1 setting is registered.
Color System
AV1
AV2
AV3
AV4
Video Input
-
AV1 1 setting is registered.
AV2
AV4
Audio Input
-
AV1 1 setting is registered.
AV2
AV3
AV4
RGB1
RGB2
• The previously recorded items will be lost.
Registration condition
Advertisement
Table of Contents
