Table of Contents
Advertisement
4 Replacement Procedures
4. Apply new grease on the CPU using a special syringe as shown in the following
figure. Apply quarter of scale (0.25ml) of grease evenly on the CPU chip. When
silicon grease is already applied to the CPU, wipe them off with a close in advance.
CAUTION: When installing the CPU, apply new grease on the top of the CPU chip.
When installing the fin, make sure the bottom of the fin covers the top of the
CPU.
5. Install the cooling fin.
6. Place the CPU holder and secure it with the following screws in the order of the
number marked on the holder.
• M2×4Z
4-60
Figure 4-41 Applying new grease
BIND screw
×3
TECRA M2V Maintenance Manual (960-476)
4.19 Cooling fin/CPU
Advertisement
Chapters
Table of Contents
Troubleshooting
