SCREENSAVER (For preventing image retention)
Setup of SCREENSAVER Time
After selecting TIME OF DAY, INTERVAL or STANDBY AFTER SCR SAVER, the relevant Time Setup will become
available for selection and the Operating Time may be set. (Time cannot be set when "MODE" is "ON" or "OFF".)
Press to select START TIME / FINISH TIME (When TIME OF
DAY is selected).
Press to select SHOW DURATION / SAVER DURATION
(When INTERVAL is selected).
Press to select SCREENSAVER DURATION (When
STANDBY AFTER SCR SAVER is selected).
Press to setup.
Notes:
• Pressing " " or " " button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
• Pressing " " or " " button continuously changes the Time by 15 minutes.
• "SCREENSAVER DURATION" of the "STANDBY AFTER SCR SAVER" can
be set from 0:00 to 23:59. When this is set to "0:00", "STANDBY AFTER
SCR SAVER" will not be activated.
Note: Timer function will not work unless "PRESENT TIME OF DAY" is set.
WOBBLING
Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour
of image.
1
2
3
Notes:
• If "MULTI DISPLAY SETUP" is set to "ON", this function does not operate.
• When this function is operating, part of the screen may appear to be missing.
30
button: Forward
button: Back
Press to display the SET UP menu.
Press to select "WOBBLING".
Press to select "ON" or "OFF".
ON: Shifts the position of the display image on a ¿ xed time
.
interval
Press to exit from adjust mode.
SCREENSAVER
PRESENT TIME OF DAY MON 15 : 00
START
MODE
TIME OF DAY
START TIME
6 : 15
FINISH TIME
12 : 30
SCREENSAVER
PRESENT TIME OF DAY MON 15 : 00
START
INTERVAL
MODE
12 : 00
SHOW DURATION
3 : 00
SAVER DURATION
SCREENSAVER
PRESENT TIME OF DAY MON 15 : 00
START
STANDBY AFTER SCR SAVER
MODE
6 : 15
SCREENSAVER DURATION
SET UP
1/2
SIGNAL
SCREENSAVER
INPUT LABEL
ECO MODE SETTINGS
WOBBLING
OFF
YUV/RGB-IN SELECT
RGB
NO ACTIVITY POWER OFF
DISABLE
ENGLISH ( US )
OSD LANGUAGE