Table of Contents
Advertisement
12 www.electrolux.com
9. OVEN - CLOCK FUNCTIONS
9.1 Electronic programmer
1
5
Clock function
You can use Duration and End at
the same time to set the time
when the appliance must be acti-
vated and then deactivated. First
set Duration, then End.
9.2 Setting the clock functions
1.
For Duration
oven function and temperature. This
is not necessary for the Minute Mind-
er
2.
Press the Selection button again and
again until the indicator for the neces-
sary clock function flashes.
2
hr min
4
Time of day
To set, change or check the time of day.
Minute Minder
To set a countdown time. This function has no effect on
the operation of the oven.
Duration
To set how long the appliance must operate.
End
To set when the appliance must be deactivated.
and End
.
hr min
hr min
Function indicators
1
1
Time display
2
Button +
3
Selection button
4
Button -
5
3
Application
3.
Press + or - to set the necessary
clock function.
The display shows the indicator for
the clock function you set. When the
set time ends, the indicator flashes
and an acoustic signal sounds for two
minutes.
, set an
4.
Press a button to stop the signal.
5.
Turn the knob for the oven functions
and the knob for the temperature to
the off position.
9.3 Cancelling the clock
functions
1.
Press the Selection button again and
again until the necessary function in-
dicator flashes.
2.
Press and hold the button -.
The clock function goes out after
some seconds.
With the Duration
functions, the appliance deacti-
vates automatically.
and End
Advertisement
Table of Contents
