Table of Contents
Advertisement
Hotplate switches
Switch- -on and switch- -off
Cooking zones or hotplates of built--in hobs are swit-
ched and regulated by means of four switches at the
right on the control panel. With switched on cooking
zones the scale section above the switches is lighted
up and at the same time serving as a signal lamp. Swit-
ches for normal cooking zones or hotplates
Switches for normal cooking zones or hotplates
For switching--on turn the selector knob on the pa-
nel to the right or to the left to the desired output
to the positions 1 -- 9. Position 9 ist the highest and
position 1 the lowest output.
For switching--off turn the selector knob to the
OFF--position.
Switches for dual- -circuit zones
With the dual--circuit zone and the griddle zone the
greater heating elements can, depending on pots or
pans size be added to the smaller heating elements.
Setting of the small cooking zone
Turn the switch knob to the right to the the setting
desired between 1 and 9.
Adding dual- -circuit of cooking or griddle zone
Turn the switch knob to the right. Continue turning
beyond position 9 to symbol
ceable stop (Attention! Do not exceed when tur-
ning).
Afterwards turn the setting knob back to the set-
ting desired. Danach die gewünschte Garstufe
einstellen.
For termination of the cooking procedure switch
back to the OFF--position.
When switching on again the cooking zone and
griddle zone the greater heating element has to
be added again.
Check after use whether the appliance is swit-
ched off. All switches to be in the OFF--positon.
Hints for using the cooking zones pls. find in teh sepa-
rate instruction manual of your hob.
to a clearly noti-
10
Hide quick links:
Advertisement
Table of Contents
