Prior To Using For The First Time; Adjusting The Water Softener - AEG ÖKO FAVORIT 40660 i User Instructions
Aeg dishwasher
Hide thumbs
Also See for ÖKO FAVORIT 40660 i:
- User information (44 pages) ,
- User instructions (44 pages) ,
- User instructions (40 pages)
Table of Contents
Advertisement
Operating Instructions
Prior to using for the first time
Prior to using for the first time, remove all the clips with which the dish
racks are secured for transport.
Then perform the following steps:
1. Adjust the water softener
0
2. Filling with Special Salt for the Water Softener
3. Filling with Rinse Aid
Adjusting the Water Softener
To prevent the build up of scale on dishes and in the dishwasher, the
dishes must be washed with soft, i.e. low lime content water. For this
reason the dishwasher is fitted with a water softener in which tap
water from a hardness of 4 °d (German degree) is softened with the aid
of special salt.
Your local water authority can advise you on the hardness of the water
3
in the area where you live.
The water softener can be set manually using the water hardness
switch; it can also be set electronically using the buttons on the control
panel.
1
in °d
)
41 - 50
30 - 40
19 - 29
4 - 18
less than 4
1)(°d) German degree, measure of the hardness of water
2)(PPM), Parts Per Million, international units of water hardness
*factory setting
10
Water Hardness
2
in PPM
)
Range
730 - 900
IV
530 - 720
IV
330 - 520
III/IV
70 - 320
I/II/III
less than
I
70
Hardness Setting
Manual
Electronic
5
1
4
3*
2
0*
1
no salt
necessary
Number of
Flashes
5
4
3
2
1
Advertisement
Table of Contents
