hit counter script
AEG ÖKO FAVORIT 5470 VI Operating Instructions Manual
AEG ÖKO FAVORIT 5470 VI Operating Instructions Manual

AEG ÖKO FAVORIT 5470 VI Operating Instructions Manual

Aeg dishwasher

Advertisement

ÖKO_FAVORIT 5470 VI
Dishwasher
Operating instructions

Advertisement

Table of Contents
loading

Summary of Contents for AEG ÖKO FAVORIT 5470 VI

  • Page 1 ÖKO_FAVORIT 5470 VI Dishwasher Operating instructions...
  • Page 2: Table Of Contents

    Contents Safety instructions Disposing of packaging and old machine Disposing of the packaging Disposing of your old machine Important hints Operating your dishwasher economically and with regard for the environment Unsuitable crockery Description of the appliance The inside of the appliance Control panel Washing programmes Before using your dishwasher for the first time...
  • Page 3: Safety Instructions

    Safety instructions Please read this instruction book carefully before use and retain for future reference. These warnings are provided in the interests of your safety. Ensure you understand them before installing or using this appliance. Using your dishwasher for its intended purpose Only use your dishwasher for machine washing of household crockery.
  • Page 4 Improper repairs may seriously endanger the user. If your dishwasher needs to be repaired, contact your local AEG Service Force Centre. Do not rest or sit on the open door. Long bladed knives stored in a upright position are a potential hazard.
  • Page 5: Disposing Of Packaging And Old Machine

    Disposing of packaging and old machine Disposing of the packaging Warning! Packaging parts (e.g. foils, styrene foam) may be dangerous for children, who could even be suffocated! You should therefore keep all packaging well away from children. All packaging materials used are environmentally compatible and reusable. The cardboard parts are produced from recycled paper, and the wood is untreated.
  • Page 6: Important Hints

    Important hints Operating your dishwasher economically and with regard for the environment Collect your dirty crockery, stack them in the dishwasher, only wash them when both baskets are full, making sure that the latter are never overloaded. Select the programme corresponding to the type of crockery and degree of soiling (see "Washing programmes"...
  • Page 7: Description Of The Appliance

    Description of the appliance The inside of the appliance IN74 1. Upper basket 10. Large filter 2. Upper basket stop 11. Upper spray arm 3. Lower spray arm 4. Salt container 5. Detergent dispenser 6. Rinse aid dispenser 7. Cutlery basket 8.
  • Page 8: Control Panel

    Control panel The controls are located on the top of the door. When selecting a programme, the door needs to be partially opened. Audible signals have been introduced to help indicate which operations the dishwasher is performing. Short signal - "Instruction accepted" When any of the buttons are pressed: a short audible signal informs you that the machine has accepted the instruction given.
  • Page 9 1. On/Off pushbutton Depress this button to switch the dishwasher on. The On/Off indicator light illuminates indicating that the washing programme can be selected and started. Depress again this button to switch the appliance off. 2. Salt refill indicator light This light illuminates when the salt container needs refilling.
  • Page 10: Washing Programmes

    Washing programmes Quantity of food scraps Type Required Programmes Type of soil of load pushbuttons RINSE Partial load to be completed later. This programme does not require RINSE AND HOLD HOLD detergent. INTENSIVE Heavily soiled. Pots and INTENSIVE 70 various different kinds of crockery...
  • Page 11 Recommended quantity Approximate values of detergent Energy Water Programme on the Cycle description inside consumption consumption duration dispenser in litres in minutes dispenser 1 cold rinse (to avoid food scraps from sticking to the dishes). Prewash up to 50°C Main wash up to 70°C 20 g 10 g 2 cold rinses...
  • Page 12: Before Using Your Dishwasher For The First Time

    Before using your dishwasher for the first time When your new dishwasher is installed, you must first make it ready for use. Before using your dishwasher for the first time, proceed as follows: - set the water softener; - fill the special salt container with special salt; - fill the rinse-aid dispenser with rinse-aid.
  • Page 13 If your water is "level 1" it is already soft and therefore there is no need to use salt. Salt must be used from "level 1" upward. The dishwasher is factory set "level 2" as this suits most users. If this level is not suitable for your area the softener should be adjusted. You may change the factory level setting by means of the wash programme selector buttons.
  • Page 14: Filling With Dishwasher Salt

    Filling with dishwasher salt Only use salt designed specifically for use in dishwashers. Other types of salt i.e. table/cooking salt contain high percentages of other substances which may damage and reduce the efficiency of the softener. To fill with salt, unscrew the cap of the salt container. Pour about half a litre of water into the container, or until it is full (this is only necessary before filling with salt for the first time).
  • Page 15: Rinse Aid Dosage

    Caution: Only fill with salt just before starting a complete washing programme (not the RINSE AND HOLD programme). This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time, which could cause corrosion. Rinse-aid Rinse aid is automatically added during the last rinse, ensuring through rinsing, spot and streak free drying.
  • Page 16: Setting The Rinse Aid Dosage

    Setting the rinse aid dosage The correct dosage of the rinse-aid should be regulated on the basis of the shine and drying results. For this purpose, set the quantity of liquid by means of the six-position selector (C) located on the inside of the filler opening (minimum quantity is position 1, maximum quantity is position 6).
  • Page 17 The amount of detergent to be used varies depending on how soiled the dishes are and the type of dishes being washed. We recommend the amounts shown in the programme chart. After filling the dispenser with detergent, close the lid. All the programmes with prewash require a small additional amount of detergent to be poured over the lid of the dispenser, as shown on the diagram.
  • Page 18: Bio Programmes And Compact Powders

    BIO programmes and compact powders On the basis of their chemical composition, dishwasher detergents can be classified into two groups: - conventional, alkaline detergents with caustic components: - low-alkaline compact powders with natural enzymes. The enzymes in low-alkaline compact powders have a dirt-dissolving effect and are also biodegradable.
  • Page 19: Loading Your Machine

    Loading your machine Before placing dishes in the machine, remove any scraps of food from the plates (small bones, toothpicks, fish bones, scraps of food etc.) to avoid clogging the filters and consequently reducing wash performance. Open the door and slide out the baskets to load the dishes. Before loading, soak very heavily soiled pots and pans.
  • Page 20 UI12 The two rear rows of prongs on the lower basket can be easily lowered to allow you to load pots, pans and bowls. To lower the prongs: Slightly pull them upward and let them drop down; to bring them back to the standing position, just pull them up again.
  • Page 21: Cutlery Basket

    Cutlery basket Place knives, forks and spoons in the cutlery basket with their handles pointing downwards. Arrange cutlery loosely and distribute it in all compartments so that each individual article has good contact with washing water. To unload your dishwasher more easily, you can take the cutlery basket out of the lower basket and unfold it.
  • Page 22: The Upper Basket

    The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates up to 24 cm in diameter), salad bowls, cups and glasses; these should be arranged as shown in the pictures. Glasses with long stems can be placed upside-down in the raised cup-racks The cup-rack on the left folds upwards to increase your loading flexibility.
  • Page 23: Adjusting The Height Of The Upper Basket

    Adjusting the height of the upper basket If washing very large plates (over 27 cm and up to 31 cm in diameter) you can load them in the lower basket after moving the upper basket to the higher position as follows: Move the front runner stops (A) of the upper basket outward and slide the basket out.
  • Page 24: Operating Instructions

    Operating instructions Set and start the programme Switch the power to the machine on. Open the water supply. The selection of the programme occurs with the door partially opened. Depress the On/Off pushbutton, the On/Off indicator light comes on. Depress the programme button which corresponds to the washing programme you wish to select;...
  • Page 25: Changing The Programme

    Changing the programme If a programme that is already running has to be changed proceed as follows: Open the door. Press the button of the selected programme for 1 second until the corresponding indicator light goes out. The dishwasher is now reset and you can select a new programme. Interrupting a programme - A programme underway is interrupted when you open the door.
  • Page 26: Care Instructions

    Care instructions Internal and external cleaning Clean the external surfaces of the machine and control panel with a soft cloth and lukewarm water. Important note! Never use commercially available furniture cleaners or abrasive detergents. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash programme without dishes using detergent.
  • Page 27: Cleaning The Large Filter

    Cleaning the large filter (once a month) Clean the large filter (A) on both sides under running water, using a brush. To take it out, remove the spray arm by pressing the two tongues (E), turn the ring (F) anticlockwise and then slide the whole part out. Refit the filter following the above instructions in reverse order.
  • Page 28: Servicing

    Servicing Certain problems are due to a lack of simple maintenance or oversights. Before calling our Service Centre, please check whether you can rectify the fault yourself by following the instructions given below. IMPORTANT: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made even if the appliance is in guarantee.
  • Page 29 "Quick" programme light flashing very fast The dishwasher will not drain The drain hose may be squashed or bent. Reposition the hose. The sink may be blocked. Clear any blockages. The drain hose extension is not correct. Follow the instructions for connecting to the waste. There is no vent in the end of the drain hose.
  • Page 30 The dishes are not clean (poor wash). The baskets are too full. The dishes have not been arranged properly. The spray arms do not rotate. The spray arms are clogged. The filters are clogged. The filters are not positioned correctly. Not enough detergent has been used or it is unsuitable.
  • Page 31: Service And Spare Parts

    Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning 0870 5 929929 Your telephone call will automatically be routed to the Service Centre covering your post code area.
  • Page 32: Customer Care

    Customer Care For general enquiries concerning your AEG appliance or for further information on AEG products please contact our Customer Care Department by letter or telephone as follows: Customer Care Department PO Box 47 Newbury Berkshire RG14 5XL Tel: 01635 572700...
  • Page 33: Technical Data

    Technical data DIMENSIONS Width 44.6 cm Height 81.8 - 87.8 cm Max depth 55.5 cm Max depth with open door 111.4 cm ELECTRICAL CONNECTION Voltage 220/240 - 50Hz MOTOR RATING DURING WASH 200 W POWER OF HEATING ELEMENT 2570 W OVERALL POWER 2770 W WATER SUPPLY PRESSURE...
  • Page 34: Installing

    Installing Positioning Set the machine up as close as possible to a water tap and a connection for waste water. In order to ensure the door closes and seals properly, it is necessary for the machine to stand firmly and horizontally on the floor. Adjust the screw feet upwards and downwards until the machine stands level.
  • Page 35: Connecting The Water Supply

    Connecting the water supply Your dishwasher has been built in accordance with the valid regulations governing water-consuming appliances and is equipped with safety devices which prevent used water from flowing back into the drinking water mains. Your dishwasher shall be connected to a cold water supply. The supply hose is fitted with a screwed hose connection (to DIN 259) and can be connected to an outlet valve (water tap) with male thread (3/4").
  • Page 36: Water Outlet Connection

    Water outlet connection The end of the drain hose can be connected as follows: - to the sink outlet siphon, securing it if necessary with a clip; - to a wall outlet provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the floor.
  • Page 37: Electrical Connection

    Electrical connection WARNING - THIS APPLIANCE MUST BE EARTHED Please ensure that the voltage and current indicated in the rating plate agrees with the voltage of your electricity supply: 220/240 volts - (i.e. 220/240 V AC). If your appliance has been equipped with a mains lead with moulded on type plug.
  • Page 38 When wiring the plug, ensure that all strands of wire are securely retained in each terminal. Do not forget to tighten the mains lead clamp on the plug. Warning! A cut off plug inserted into 13 amp socket is a serious shock hazard.
  • Page 40 AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.de © Copyright by AEG 152989 59/0 0/1098...

Table of Contents