CONTENTS BEFORE USE Warning BEFORE USE Do not operate any function that takes your attention away from safe driving. BASICS Caution Volume setting: GETTING STARTED • Adjust the volume so that you can hear sounds outside the car to prevent accidents. •...
Detach * Not used. Pull out the insulation sheet How to reset Detach when using for the first time. KDC-361U button KDC-261UB How to replace the battery KDC-261UR Your preset adjustments will also be erased. Do this (on the faceplate) Do this (on the remote control) Press L SRC.
Press the volume knob to enter [FUNCTION]. 6×9 inches or 6 inches) or OEM speakers for optimum performance. Turn the volume knob to select [CLOCK], then press the DISPLAY knob. KDC-361U EASY MENU KDC-130Y (For Turn the volume knob to select [CLOCK ADJUST], then press ON: Both display and button illumination change to white color when entering...
NO: Cancels (upgrading is not activated). Other settings For details on how to update the firmware, see: www.kenwood.com/ Press the volume knob to enter [FUNCTION]. cs/ce/ Turn the volume knob to make a selection (see the following table), then press the knob.
(music), (music), (music), (music), (music) The unit will search for the Program Type iPod/iPhone KDC-361U KDC-261UB categorized under KDC-261UR selected. • If the volume is adjusted during reception of traffic information, alarm or news bulletin, the adjusted volume is memorized automatically.
Page 9
• Audio CD: TRACK REPEAT, REPEAT OFF • To cancel, press and hold • MP3/WMA/WAV file or iPod: FILE REPEAT, FOLDER REPEAT, REPEAT OFF • KENWOOD Music Editor Light (KME Light)/ KENWOOD Music Control (KMC) If you have many files..file : FILE REPEAT, REPEAT OFF...
CD / USB / iPod Preparation: Direct Music Search (using RC-406) Set the skip search ratio Select KDC-130Y (for While listening to iPod or KME Light/ KMC file... Start listening Press DIRECT. Press the volume knob to enter Press the number buttons to enter a track/ Turn the volume knob to select , then Connect a portable audio player...
AUDIO SETTINGS While listening to any source... Press the volume knob to enter Turn the volume knob to select , then press the knob. Turn the volume knob to make a selection (see the following table), then press the knob. Repeat step until the desired item is selected or activated.
DISPLAY SETTINGS MORE INFORMATION General About KENWOOD Music Editor Light Press the volume knob to enter Turn the volume knob to select , then and KENWOOD Music Control press the knob. Turn the volume knob to make a selection (see the following table), then press the knob.
TROUBLESHOOTING Symptom Remedy Symptom Remedy Muting upon the reception of a phone call Connect the MUTE wire to your telephone using a commercial telephone accessory. When a call comes in, “CALL” appears. (The audio system pauses.) • To continue listening to the audio system during a call, press SRC. “CALL”...
Page 14
Warning Installing the unit (in-dash mounting) Caution How to remove the unit Basic procedure Detach the faceplate. Remove the key from the ignition switch, then Fit the catch pin on the extraction keys into the holes on both sides of disconnect the terminal of the car battery.