Table of Contents
Advertisement
Section
SIRIUS Satellite Radio tuner
10
Listening to SIRIUS Satellite
Radio
1 1 1 1
5 5 5
You can use this unit to control a SIRIUS Satel-
lite Radio tuner, which is sold separately.
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation man-
ual. This manual provides information on
these points. For all other information on
using the SIRIUS tuner, please refer to the SIR-
IUS operation manual.
! With this unit, you can operate one addi-
tional function: SIRIUS channel direct se-
lection. Refer to Selecting a SIRIUS channel
directly on this page.
1 SIRIUS band indicator
Shows the SIRIUS band which has been
selected.
2 SIRIUS channel number indicator
Shows to which SIRIUS channel number
the tuner is tuned.
3 SIRIUS preset number indicator
Shows what SIRIUS preset has been
selected.
4 SIRIUS channel select setting indicator
Shows what channel select setting has
been selected. CH is displayed when
Channel number is selected, and CAT is
displayed when Category is selected.
44
En
5 SIRIUS channel name
1
2 2 2 2
3 3 3 3 4 4 4
Press SOURCE until you see SIRIUS displayed.
2
Press BAND until the desired SIRIUS band is
displayed, SR-1, SR-2 or SR-3.
3
MULTI-CONTROL left or right.
The channels move up or down step by step.
Channels that cannot currently be selected
are skipped, and the next channel is selected.
# If you push and hold MULTI-CONTROL left or
right, you can increase or decrease channel num-
ber continuously.
# You can also perform tuning from a desired
channel category. (Refer to Selecting a channel in
the channel category on page 46.)
It may take a few seconds before you can hear
anything while this unit acquires and processes
the satellite signal when you change the source
to SIRIUS tuner or select a channel.
Selecting a SIRIUS channel
directly
You can select a SIRIUS channel directly by
entering the desired channel number.
1
CHANNEL INPUT appears in the display.
2
input the desired channel number.
# To cancel the input numbers, press CLEAR on
the remote control.
3
press DIRECT on the remote control.
The SIRIUS channel of entered number is
selected.
Shows the channel name of broadcast
channel.
Press SOURCE to select SIRIUS.
Press BAND to select a SIRIUS band.
To perform tuning, push
Note
Press DIRECT on the remote control.
Use 0 to 9 on the remote control to
While the input number is displayed,
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
