Power-Up Modes - Toshiba Tecra M11 User Manual
Satellite pro s500m series
Hide thumbs
Also See for Tecra M11:
- Maintenance manual (477 pages) ,
- User manual (253 pages) ,
- Specifications (4 pages)
Table of Contents
Advertisement
Supervisor Password
If you set a Supervisor Password, some functions might be restricted when
a user logs on with the User Password. To set a Supervisor Password,
execute the file TOSPU.EXE. The file is located at:
C:\Program Files\Toshiba\PasswordUtility\TOSPU.exe
This utility lets you do the following:
■
Register, delete or change the Supervisor Password.
■
Specify restrictions for general users.
Starting the computer by password
If you have already registered a password, there are several ways to start
the computer:
■
Swipe your fingerprint on the sensor if you have already registered the
fingerprint with the Fingerprint utility and enabled Fingerprint System
Boot Authentication. If you would not like to swipe your finger or cannot
authenticate the fingerprint for some reasons, push the BACK SPACE
key to skip the fingerprint authentication screen. You can try to swipe
the fingerprint up to five times. If you failed fingerprint authentication
five times, you must enter the password manually to start the computer.
■
Enter the password manually.
The password is necessary only if the computer was turned off in Shut
Down Mode or Hibernation Mode.
It is not needed in Sleep Mode and Restart.
To enter a password manually, follow the steps as detailed below:
1. Turn on the power as described in Chapter 1,
following message will appear in the screen:
S
2. Enter the Password.
3. Press ENTER.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.
Power-up modes
The computer has three different power-up modes as follows:
■
Shut Down Mode : The computer will shut down without saving data - in
view of this you must always save your work before you turn the
computer off.
■
Hibernation Mode : Data in memory will be saved to the hard disk drive.
■
Sleep Mode : Data will be maintained in the computer's memory.
User's Manual
Password=
Power and Power-Up Modes
Getting
Started. The
6-11
Hide quick links:
Advertisement
Table of Contents
