Summary of Contents for Panasonic Viera TXL32C20EA
Page 1
Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance.
Page 2
This TV may not work correctly with CI module that is not approved by the service provider. Additional fees may be charged depending on the service provider. The compatibility with future DVB services is not guaranteed. Check the latest information on the available services at the following website. (English only) http://panasonic.jp/support/global/cs/...
To prevent damage which might result in electric make the TV unstable, risking injury. Be sure to ask shock or fire, do not expose this TV set to rain or your local Panasonic dealer to perform the set up or excessive moisture. installation.
Caution When cleaning the TV remove the mains plug Cleaning an energized TV may cause electric shock. Remove the mains plug from the wall socket when TV is not in use for a prolonged period of time The TV will still consume some power even in the off mode, as long as the mains plug is still connected. Remove the mains plug from the wall socket before connecting or disconnecting leads.
WARNING! Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer. Always be sure to ask a qualified technician to carry out set up. Incorrect fitting may cause equipment to fall, resulting in injury and product damage.
Otherwise the TV may fall over and become damaged, and personal injury may result. Do not use the pedestal if it becomes warped or physically damaged. If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic dealer immediately.
Identifying Controls Remote Control Media Player Input mode selection (p. 46) Switches to SD Card viewing mode TV - switches DVB-C / DVB-T / Analogue (VIERA IMAGE VIEWER) mode (p. 14) AV - switches to AV input mode from Input Standby On / Off switch Selection list (p.
Page 9
Function select Volume / Contrast / Brightness / Colour / Sharpness / Tint (NTSC signal) / Bass (“Music” or “Speech” mode in Sound Menu) / Treble (“Music” or “Speech” mode in Sound Menu) / Balance / Auto Setup (p. 32 and p. 33) Increases or decreases the channel position by one.
Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. Example 1 Example 2 Connecting aerial Connecting DVD Recorder / VCR TV only TV, DVD Recorder or VCR Rear of the TV...
Page 11
Example 3 Connecting DVD Recorder / VCR and Set top box TV, DVD Recorder / VCR and Set top box Rear of the TV Terrestrial aerial AC 220-240 V 50 Hz Mains lead Cable DIGITAL AUDIO COMPONENT RF cable AUDIO Fully wired SCART cable RF OUT...
Auto Setup Search and store TV channels automatically. These steps are not necessary if the setup has been completed by your local dealer. Please complete connections (p. 10 and p. 11) and settings (if necessary) of the connected equipment before starting Auto Setup.
Page 13
Auto Setup varies depending on the country you select. DVB-C Network Settings enter the frequency and network ID Enter the Home Frequency and Depending on the country you select, “Auto” is Network ID specified by your cable displayed and you do not have to enter them. provider.
Watching TV Turn power on (Press for about 1 second) Mains power On / Off switch should be On. (p. 9) Select the mode INPUT access TV Selection MENU ASPECT DIRECT TV REC DVB-C EXIT DVB-T select Analogue The selectable modes vary depending on the stored channels (p. 12). If “TV Selection”...
Page 15
Other useful functions Hold HOLD Freeze / unfreeze picture Display Information banner Display Information banner Also appears when changing a channel Category Channel position and name To change the category blue Channel type (if it is Radio or Data channel) Current time Example (DVB): 1 ZDF...
Page 16
Watching TV Display subtitles Display / hide subtitles (if available) STTL To change the language for DVB (if available) “Preferred Subtitles” (p. 30) Note If you press the STTL button in Analogue mode, it switches to teletext service and calls up a favourite page (p.
Page 17
Display the selectable settings for the current programme To change OPTION Check or change the current programme status instantly change select Multi Video (DVB mode) Teletext Character Set Allows you to select the image (if available) Sets the teletext language Setup Menu (p.
Using TV Guide TV Guide - Electronic Programme Guide (EPG) provides an on screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcasters). This function varies depending on the country you select (p. 12). The postcode entry or update may be required to use the GUIDE Plus+ system depending on the country you select.
Page 19
Other useful functions View details of the programme (DVB mode) Select the programme View details TV Guide: Landscape Wed 28.10.2009 10:46 Wed 28.10.2009 DIY SOS Press again to return BBC ONE select 20:00 - 20:30, 30 min. to TV Guide. Details Return to list EXIT...
Viewing Teletext Teletext services are the text information provided by the broadcasters. The features may vary depending on the broadcasters. What is FLOF (FASTEXT) mode? In FLOF mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriately coloured button.
Page 21
INDEX Return to the main index page INDEX Call up a favourite page View a favourite page stored Call up the page stored on the blue button (List mode). STTL Factory setting is “P103”. View in multi window Watch TV and Teletext in two windows at once MENU (press twice) Select Picture and text On or Off...
Watching External inputs Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input. To connect the equipment p. 10, 11 and p. 58 The Remote Control is capable of operating some functions of selected external equipment. Turn the TV on When connecting with SCART as example 2 or 3 (p.
Page 23
Start recording How to change the code for the type of the equipment Each type of the Panasonic equipment has its own remote control code. Please change the code according to the equipment you want to operate. If you operate the connected equipment in VIERA Link (p. 56), select the code “73”.
How to Use VIERA TOOLS You can access some special features easily by using the VIERA TOOLS function. Display icons of the feature INPUT ASPECT MENU DIRECT TV REC EXIT Select a feature select access OPTION RETURN TEXT STTL INDEX HOLD VIERA Link Control Follow the operations of each feature VIERA Link Control...
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. Display the menu INPUT Displays the functions that can be set MENU (varies according to the input signal) ASPECT MENU DIRECT TV REC EXIT Select the menu access...
How to Use Menu Functions Menu list Menu Item Adjustments / Configurations (alternatives) Basic picture mode (Dynamic / Normal / Cinema / True Cinema / Game) In each Viewing Mode and input, Contrast, Brightness, Colour, Sharpness, Tint, Colour Balance, Vivid Colour, P-NR and 3D-COMB can be adjusted and stored to suit your particular viewing requirement.
Page 27
Menu Item Adjustments / Configurations (alternatives) Selects the basic sound mode (Music / Speech / User) The selected mode affects all input signals. Music: Improves sound quality for watching music video, etc. Speech: Improves sound quality for watching news, drama, etc. Mode In Music and Speech mode, you can adjust “Bass”...
Page 28
How to Use Menu Functions Menu Item Adjustments / Configurations (alternatives) Sets a timer to remind watching or record forthcoming programmes (p. 38) Timer Programming DVB mode only Sets the time the TV automatically goes to Standby mode Off Timer (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) VIERA Link Sets to use VIERA Link functions (Off / On) (p.
Page 29
Menu Item Adjustments / Configurations (alternatives) Favourites Edit Creates list of favourite DVB-C channels (p. 35) Channel List Skips the unwanted DVB-C channels or edits DVB-C channels (p. 35) Auto Setup Automatically sets the DVB-C channels supplied (p. 32) Manual Tuning Sets the DVB-C channels manually (p.
Page 30
How to Use Menu Functions Menu Item Adjustments / Configurations (alternatives) OSD Language Changes language for on screen displays Selects the first and second preferred language for DVB multi audio (depending on Preferred Audio 1 / 2 the broadcaster) Selects the first and second preferred language for DVB subtitles (depending on the Preferred Subtitles broadcaster) 1 / 2...
Page 31
Menu Item Adjustments / Configurations (alternatives) Shipping Condition Resets all settings, for example, when moving house (p. 43) System Update Downloads new software to TV (p. 44) Software Licence Displays the software licence information System Information Displays the system information of this TV Selects optional colour system based on video signals in AV mode AV Colour System (Auto / PAL / SECAM / M.NTSC / NTSC)
Retuning from Setup Menu DVB-C channels Automatically retune all the DVB-C channels supplied. This function is available if DVB-C channel tuning is already performed. Only DVB-C channels are retuned. All the previous tuning settings are erased. If a Child Lock PIN number (p. 40) has been set, it must be entered. Select DVB-C p.
Page 33
DVB-T or Analogue channels Automatically retune all DVB-T or Analogue channels received in the area. DVB-T Auto Setup is available if DVB-T channel tuning is already performed. Only DVB-T channels are retuned in DVB-T mode. Only Analogue channels are retuned in Analogue mode. All the previous tuning settings are erased.
Tuning and Editing Channels (DVB) You can retune channels or make your favourite channel lists, skip unwanted channels, etc. Select DVB-C or DVB-T p. 14 INPUT ASPECT MENU DIRECT TV REC Display the menu MENU EXIT Select “Setup” access Main Menu Picture OPTION RETURN...
List favourite DVB channels Favourites Edit Create your favourite channel lists from various broadcasters (up to 4: Favourites1 to 4). The DVB Favourites lists are available from “Category” in the Information banner (p. 15) and the TV Guide (p. 18). Select a channel to list To sort channel names in alphabetical order DVB-C Favourites Editor...
Tuning and Editing Channels (Analogue) You can retune channels or skip unwanted channels, edit channels etc. Select Analogue p. 14 INPUT Display the menu MENU MENU EXIT Select “Setup” access RETURN Main Menu Picture Sound Setup select Select “Analogue Tuning Menu” access Setup Menu pqrs...
Skip unwanted Analogue channels, Edit Analogue channels Channel List You can hide unwanted Analogue channels. The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels. Select a channel and reveal / hide reveal / hide Analogue Channel List BBC1 To reveal all channels...
Timer Programming Timer Programming from Menu The Timer Programming menu allows you to choose programmes that you wish to record or remind watching. At the correct time, the TV will switch on and tune to the correct channel even if the TV is in Standby mode.
Page 39
Set timer programming details Timer Programming Start making the settings Select the function (Reminder or Ext Rec.) Ext Rec. : to record the programme to the recorder When the start time comes, the channel will be switched automatically and the video and audio signals will be output. select 2 mins.
Child Lock You can lock specific channels / AV input terminals and control who watches them. When the locked channel / input is selected, a message appears; by entering the PIN number, you can watch it. INPUT Display the menu MENU ASPECT MENU...
Input Labels For easier identification and selection of the input mode, you can label each input mode or skip terminal that is not connected to any equipment. To select the input mode p. 22 Display the menu INPUT MENU ASPECT MENU DIRECT TV REC Select “Setup”...
Although CI module may enable you to view some services, this TV does not guarantee all services (e.g. pay-TV). Please use only the approved CI module by the broadcaster. Consult your local Panasonic dealer or broadcasters for more information and conditions of the services. CI slot Caution Turn Off Mains power On / Off switch whenever inserting or removing the CI module.
Shipping Condition Resets the TV to its original condition, i.e. no channels tuned in. All settings are reset (channels, picture, sound settings, etc.). Display the menu INPUT MENU ASPECT MENU DIRECT TV REC EXIT Select “Setup” access Main Menu Picture Sound OPTION RETURN...
Updating the TV Software From time to time, a new version of software may become available for download to enhance the performance or operations of the TV. If there is an update available, a notification banner is displayed when the channel has the update information.
Page 45
Update TV’s software system System Update To update automatically Select “Auto Update Search in Standby” Every time you set, the TV automatically performs a System Update Auto Update Search in Standby search in standby and downloads an update, if any System Update Search Now software updates are available.
Using Media Player Viewing from SD Card (VIERA IMAGE VIEWER) Photo mode : Still pictures recorded by digital cameras will be displayed. Video mode : Moving pictures recorded by digital video cameras will be played back. During the operation, audio signal is output from AV1 and DIGITAL AUDIO OUT terminals. But no video signals are output.
Page 47
Photo Setup Setup the settings for Photo mode. Display Select “Photo Setup” Select the items and set access the menu Photo Setup Menu Main Menu Back Ground Music Type1 Picture Frame MENU Colour Effect Sound select select Transition Effect Fade Photo Setup Screen Mode Normal...
Page 48
Using Media Player Viewing from SD Card (VIERA IMAGE VIEWER) Video mode Video mode supports AVCHD and MPEG2 file formats. Insert the SD Card and start Media Player Select “Video” Media Player select SD CARD access MENU ASPECT You can also access Video mode directly by Contents Select EXIT using VIERA TOOLS...
Page 49
Sound Settings You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT terminal. To confirm or change the current sound status (during playback) Display the Option menu Change the sound (if the video has multiple audio signals) OPTION Option Menu change...
Use fully wired HDMI compliant cable. Connect the equipment supporting VIERA Link to the TV’s HDMI1 or HDMI2 terminal via an HDMI cable. About HDMI cable for connecting Panasonic HD Video Camera or LUMIX Camera, read the manual of the equipment.
Page 51
VIERA Link (HDMI and Audio out connections) Connected equipment Player theatre with Blu-ray Disc theatre with Amplifier with VIERA Link function VIERA Link function VIERA Link function Features Preset download – – – Easy playback – Power on link – Power off link Reduce unnecessary power consumption –...
Link Functions Q-Link VIERA Link Q-Link Preparations Connect the DVD Recorder / VCR with the following logos: “Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK” Q-Link connection p. 50 Use fully wired SCART cable. Set up the DVD Recorder / VCR. Read the manual of the recorder. Download preset - channel, language, country / region settings “Preset download”...
Page 53
Control™” VIERA Link “ Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function. This TV supports “HDAVI Control 5” function. Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and SCART cables allow you to interface them automatically (p. 50 and p. 51).
Page 54
Link Functions Q-Link VIERA Link Features available Reduce unnecessary power consumption in standby Standby Power Save Set Standby Power Save “On” in the Setup Menu to use this function “Standby Power Save” (p. 28) The power consumption in Standby mode of the connected equipment is controlled higher or lower in synchronization with the TV On / Off state to reduce the consumption.
Features available (Using VIERA Link Menu) Pause Live TV programme Pause Live TV You can pause the live TV programme and resume later. Live TV programme will be recorded on HDD of the connected DIGA Recorder. This function is available with DIGA Recorder which has HDD. If you connect a variety of recorders including other manufacturers’...
Link Functions Q-Link VIERA Link Features available (Using VIERA Link Menu) Control the menu of the connected equipment by VIERA remote control VIERA Link Control You can control some functions of the connected equipment with this TV remote control (point the remote control at the TV’s signal receiver).
Page 57
Features available (Using VIERA Link Menu) Speaker control Speaker Selection You can control the theatre speaker with this TV remote control (point the remote control at the TV’s signal receiver). If you cannot operate, check the settings and the equipment “Summary of Q-Link and VIERA Link features”...
External Equipment These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment, the table below, and the specifications (p. 67). To listen with speakers Optical digital audio cable ( M3 stereo Ampli¿...
Page 59
HDMI equipment Camcorder / “HDMI connection” (p.63) HDMI equipment DVD Recorder Fully wired HDMI compliant cable Fully wired HDMI compliant cable RF cable (ARC) DIGITAL AUDIO COMPONENT AUDIO To record / playback DVD Recorder / Fully wired SCART cable Fully wired HDMI compliant cable Fully wired...
Technical Information Auto Aspect The optimum size and aspect can be chosen automatically, and you can enjoy finer images. (p. 16) Aspect Control Signal “WIDE” will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART / HDMI terminal is found.
Page 61
Electrical interference, static electricity, or erroneous operation may damage the data or card. Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the TV. (Panasonic is not liable for any deterioration or damage of recorded data.) Data format for Card browsing...
Page 62
Technical Information Characters table for numeric buttons You can enter characters by using numeric buttons for free input items. User input Name Press the numeric button repeatedly until you reach the desired character. A B C D E F G H J K L M N O P Q R S T U V W X Y Z...
Page 63
HDMI connection HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non-compression standard. HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment. HDMI-compatible equipment with an HDMI or DVI output terminal, such as a DVD player, a set top box or a game equipment, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
Page 64
Technical Information Input signal that can be displayed COMPONENT (Y, P ), HDMI Mark: Applicable input signal Signal name COMPONENT HDMI 525 (480) / 60i 525 (480) / 60p 625 (576) / 50i 625 (576) / 50p 750 (720) / 60p 750 (720) / 50p 1,125 (1,080) / 60i 1,125 (1,080) / 50i...
FAQs Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Block noise, frozen or disappearing image occurs in DVB mode / White spots...
Page 66
The panel might move slightly when it is pushed with a finger, and Clattered sound might be heard clattered sound might be heard. This is not a malfunction. Follow the message’s instructions. An error message appears If the problem persists, contact your local Panasonic dealer or the authorized Service Centre.
(H.264) Countries that DVB-C is available: Germany, Switzerland, Denmark, Sweden, Norway, Finland, Netherlands Check the latest information on the available services at the following website. (English only) http://panasonic.jp/support/global/cs/ Aerial input VHF / UHF Temperature : 0 °C - 35 °C...
Licensing LLC in the United States and other countries. HDAVI Control™ is a trademark of Panasonic Corporation. “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.