Table of Contents
Advertisement
Link Functions
Enjoy additional HDMI Inter-Operability with Panasonic products which have "HDAVI Control" function.
This TV supports "HDAVI Control 3" function.
Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with
HDMI and SCART cables allow you to interface them automatically.
These features are limited to models incorporating "HDAVI Control" and "VIERA Link".
•
Some functions are not available depending on the equipment's version of HDAVI Control. Please con¿ rm the
connected equipment's version of HDAVI Control.
•
VIERA Link "HDAVI Control", based on the control functions provided by HDMI which is an industry standard
known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added.
As such, its operation with other manufacturers' equipment that supports HDMI CEC cannot be guaranteed.
Please refer to individual manuals for other manufacturers' equipment supporting VIERA Link function.
About applicable Panasonic equipment, consult your local Panasonic dealer
or refer to the URL: www.panasonic.co.uk
Preparations
•
Connect the equipment supporting VIERA Link.
•
VIERA Link connection
•
Set up the connected equipment. Read the manual of the equipment.
•
For optimal recording, the settings of the recorder might be required. For details, read the manual of the
recorder.
•
Download Analogue programme setting
•
Set VIERA Link On in Setup Menu
•
Set up the TV
After connection, turn the equipment on and then switch the TV on.
Select the input mode to HDMI1 or HDMI2 (p. 22), and make sure that an image is displayed
correctly.
This setup should be done each time when the following conditions occur:
• for the first time
• when adding or reconnecting equipment
• when changing setup
Features available
Easy
playback
Power on
link
Power off
link
42
VIERA Link "
p. 40
"VIERA Link" (p. 25)
Automatic Input switching - When the connected equipment is operated, input mode
is switched automatically. When it is stopped operating, input mode is returned.
When the connected equipment starts playback or direct navigator / function menu
for the equipment are activated, the TV is automatically turned on. (Only when TV is
in Standby mode.)
When TV is set to Standby mode, the connected equipment is also automatically
set to Standby.
•
This function will work even if the TV enters standby mode automatically by Off Timer
function or auto power standby function.
Control
"Q-Link Download" (p. 25) or "Auto Setup" in Analogue mode (p. 33)
or "Auto Setup" - when first using the TV (p. 10)
(
Q-Link
VIERA Link
"
TM
)
Hide quick links:
Advertisement
Table of Contents
