Table of Contents
Advertisement
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and
electronic products and batteries should not be mixed with general household waste. For proper treatment,
recovery and recycling of old products and used batteries, please take them to applicable collection points,
in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent
any potential negative effects on human health and the environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your local
municipality, your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further
information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact your
local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples) :
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
Declaration of Conformity (DoC)
Authorized Representative :
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
Customer's Record
The model number and serial number of this product may be found on its rear panel. You should note this serial number in
the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid
in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
Web Site : http://panasonic.net
© Panasonic Corporation 2011
Serial Number
M0311-0
Printed in Czech Republic
Advertisement
Table of Contents
Related Manuals for Panasonic Viera TX-P42S30E
Summary of Contents for Panasonic Viera TX-P42S30E
- Page 1 Declaration of Conformity (DoC) Authorized Representative : Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany Customer’s Record The model number and serial number of this product may be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
-
Page 2: Operating Instructions
Model No. TX-P42S30E Operating Instructions Plasma Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. - Page 3 This TV may not work correctly with CI module that is not approved by the service provider. • Additional fees may be charged depending on the service provider. • The compatibility with future services is not guaranteed. • Check the latest information on the available services at the following website. (English only) http://panasonic.jp/support/global/cs/tv/...
-
Page 4: Table Of Contents
(p. 88) Basic Connection ··································································· 11 Auto Setup ··············································································· 13 Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we disclaim any liability or damage arising from operation and/ or performance from usage of such other maker’s peripheral Enjoy your TV! devices. -
Page 5: Safety Precautions
Using an unapproved pedestal or other fixtures may make the TV unstable, risking injury. Be sure to ask your local other open flames away Panasonic dealer to perform setup. • Use approved pedestals (p. 7) / wall-hanging brackets from this product at all (p. 6). -
Page 6: Maintenance
Caution When cleaning the TV, remove the mains Do not block the rear air vents • Blocked ventilation by newspapers, table cloths, curtains, plug • etc. may cause overheating, fire or electrical shock. Cleaning an energized TV may cause electrical shock. Do not expose your ears to excessive When the TV is not going to be used for a volume from the headphones... -
Page 7: Accessories / Options
Keep these parts out of reach of young children. Optional accessories Please contact your nearest Panasonic dealer to purchase the recommended optional accessories. For additional details, please refer to the manual of the optional accessories. Wireless LAN Adaptor •... - Page 8 Do not use the pedestal if it becomes warped or physically damaged. • If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic dealer immediately. During set-up, make sure that all screws are securely tightened.
- Page 9 Assembling the pedestal Securing the TV Use the assembly screws to fasten the Use the assembly screws to fasten securely. • pole to the base securely. Tighten the four assembly screws loosely at first, then tighten • Make sure that the screws are securely them firmly to fix securely.
-
Page 10: Identifying Controls
Identifying Controls Remote Control • Confirms selections and choices INPUT SD CARD • Press after selecting channel positions to quickly change channel MENU ASPECT DIRECT TV REC • Displays the Channel List EXIT [Option Menu] (p. 20) • Easy optional setting for viewing, sound, etc. Teletext (p. 25) •... -
Page 11: Auto Power Standby Function
Headphones jack (p. 81) AV2 terminals (p. 81) Mains power On / Off switch • Use to switch the mains power. If you turned the TV Off during Standby mode by the remote control last time, the TV will be in Standby mode when you turn the TV On with Mains power On / Off switch. -
Page 12: Basic Connection
Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first. Example 1 Example 2 Connecting aerial... - Page 13 Example 3 Connecting DVD Recorder / VCR and Set top box TV, DVD Recorder / VCR and Set top box Rear of the TV Terrestrial aerial Cable RF cable AC 220-240 V 50 / 60 Hz Fully wired Fully wired HDMI SCART cable Fully wired compliant cable SCART cable...
-
Page 14: Auto Setup
Auto Setup Search and store TV channels automatically. • These steps are not necessary if the setup has been completed by your local dealer. • Please complete connections (p. 11, 12) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment. -
Page 15: Setup The Network Connection
[DVB-C Network Settings] • Depending on the country you select, select your cable provider beforehand by following the on screen instructions. select DVB-C Network Settings Frequency Auto [Start Auto Setup] pqrs wxyz Network ID Auto access Start Auto Setup Normally set [Frequency] and [Network ID] to [Auto]. If [Auto] is not displayed or if necessary, enter [Frequency] and [Network ID] specified by your cable provider with numeric buttons. - Page 16 ■ [Wireless] Select the connection type select Connection Type Please select network connection type. access Search for access point WPS(Push button) [Search for access point] Access points found automatically are listed. 1. Select your desired access point select Available Access Points SSID Wireless type Encrypt...
- Page 17 [WPS(Push button)] 1. Press the WPS button on the access point until the light flashes 2. Connect the Wireless LAN Adaptor and the access point WPS(Push button) 1) Please press the ‘WPS’ button on the access point until its light flashes. •...
-
Page 18: Using "Viera Connect
Using “VIERA Connect” VIERA Connect is a gateway to the internet services unique to Panasonic and has expanded VIERA CAST features greatly. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as photos, videos, games, etc. -
Page 19: Watching Tv
Watching TV Turn power on • Press for about 1 second • Mains power On / Off switch should be On. (p. 10) ■ VIERA Connect introduction banner appears You can access to VIERA Connect and enjoy the various contents. (p. 17) •... -
Page 20: Other Useful Functions
Other useful functions Display Information banner Display Information banner • Also appears when changing a channel Example : DVB 20:35 HDTV Coronation Street All DVB-T Channels 20:00 - 20:55 Info Change category Bad signal Dolby D+ Channel position and name Programme Start / Finish time (DVB) Channel number, etc. -
Page 21: Off Timer
Hold Freeze / unfreeze picture HOLD Display the selectable settings for the current status Check or change the current status instantly • OPTION To change select / change select access store [Multi Video] (DVB mode) [Dual Audio] (DVB mode) [Teletext Language] (DVB mode) Allows you to select from a group of Allows you to select stereo / monaural Allows you to select between alternative... -
Page 22: Last View
Aspect Change the aspect ratio (image size) ASPECT Enjoy viewing the image at its optimum size and aspect. Programmes usually contain an “Aspect Control Signal” (Widescreen signal, etc.), and the TV will choose the aspect ratio automatically according to the “Aspect Control Signal” (p. 82). ■... -
Page 23: Using Tv Guide
Using TV Guide TV Guide - Electronic Programme Guide (EPG) provides an on screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcasters). • This function varies depending on the country you select (p. 13). •... - Page 24 ■ ■ To the previous day (DVB mode) To the next day (DVB mode) (red) (green) ■ ■ To view a channel list of the selected type To view a channel list of the selected category (DVB mode) (blue) (yellow) (Category list) select category (Type list) Categor y...
-
Page 25: Timer Programming (Dvb Mode)
Timer Programming (DVB mode) Timer Programming is a timer to remind watching or record the programme to the external recorder. Select the forthcoming programme Select the function ([Ext Rec.] or [Reminder]) select select (Timer Programming screen) Timer Programming Wed 27.10.2010 10:46 store Function No. -
Page 26: Viewing Teletext
Viewing Teletext Teletext services are the text information provided by the broadcasters. The features may vary depending on the broadcasters. What is FLOF (FASTEXT) mode? In FLOF mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriately coloured button. - Page 27 FULL / TOP / BOTTOM MENU (green) (TOP) (BOTTOM) Normal (FULL) (Expand the BOTTOM half ) (Expand the TOP half ) View in multi window Watch TV and Teletext in two windows at once MENU Select Picture and text On or Off (Press twice) •...
-
Page 28: Watching External Inputs
Watching External Inputs Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input. • To connect the equipment (p. 11, 12, 79 - 81) The remote control is capable of operating some functions of selected external equipment. “Operating the equipment with the TV remote control”... -
Page 29: Operating The Equipment With The Tv Remote Control
The equipment connected to the TV can be directly operated with the below buttons of this TV remote control. Selection Switch for operating the connected equipment Select “DVD/VCR” to operate Panasonic DVD Recorder, DVD Player, Player theatre, Blu-ray Disc theatre or VCR DVD/VCR “How to change the code for the type of the equipment”... -
Page 30: How To Use Viera Tools
How to Use VIERA TOOLS You can access some special features easily by using the VIERA TOOLS function. Display icons of the feature Select a feature select access ■ To return to TV EXIT VIERA Link Control ■ Follow the operations of each feature [Music] ∗... -
Page 31: How To Use Menu Functions
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. Display the menu • MENU Displays the functions that can be set (varies according to the input signal) Select the menu Example : [Picture Menu] select Main Menu... -
Page 32: Menu List
Menu list Menu Item Adjustments / Configurations (alternatives) Basic picture mode [Dynamic] / [Normal] / [Cinema] / [True Cinema] / [Game] / [Photo] In each Viewing Mode and input, [Contrast], [Brightness], [Colour], [Sharpness], [Tint], [Colour Balance], [Vivid Colour], [Eco Mode], [P-NR] and [3D-COMB] can be adjusted and stored to suit your particular viewing requirement. - Page 33 Menu Item Adjustments / Configurations (alternatives) Makes still or slow moving pictures look more vivid [Off] / [On] • Occasionally, whilst viewing still or slow moving pictures, colour patterning may be 3D-COMB seen. Set to [On] to display sharper and more accurate colours. •...
- Page 34 Menu Item Adjustments / Configurations (alternatives) Selects the mode for wobbling of the image to prevent panel “image retention” [Auto] / [On] Pixel Orbiter [Auto] : Automatically works only for the appropriate images and you rarely recognise the wobbling. Scrolls the vertical bar to prevent panel “image retention” •...
- Page 35 Menu Item Adjustments / Configurations (alternatives) Selects multiplex sound mode (if available) [Stereo] : Use this normally [Mono] : When stereo signal cannot be received [M1] / [M2] : Available while mono signal is transmitted • Analogue mode only Selects the initial setting for audio tracks [Auto] / [Multichannel] / [Stereo] / [MPEG] •...
- Page 36 Menu Item Adjustments / Configurations (alternatives) Automatically sets the TV to the most suitable energy-saving mode • If you press the OK button, the following items are set as below : Eco Navigation [Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save], [Power Save] [On] [Intelligent Auto Standby] [On (No reminder)]...
- Page 37 Menu Item Adjustments / Configurations (alternatives) Favourites Edit Creates list of favourite DVB-T channels (p. 40) Channel List Skips the unwanted DVB-T channels or edits DVB-T channels (p. 41) Auto Setup Automatically sets the DVB-T channels received in the area (p. 39) Manual Tuning Sets the DVB-T channels manually (p. 42) Update Channel List Updates DVB-T Channel List while keeping your settings (p. 42)
- Page 38 Menu Item Adjustments / Configurations (alternatives) Banner Display Sets how long the Information banner (p. 19) stays on screen Timeout [0 (No display)] / [1] / [2] / [3] / [4] / [5] / [6] / [7] / [8] / [9] / [10] (seconds) VIERA Connect Sets the VIERA Connect introduction banner display [Off] / [On] (p.
-
Page 39: Retuning From Setup Menu
Retuning from Setup Menu Automatically retune the channels received in the area. • This function is available if channel tuning is already performed. • Only the selected mode is retuned. All the previous tuning settings are erased. • If Child Lock PIN number (p. 48) has been set, the PIN number is required. •... - Page 40 DVB-T or Analogue channels Select DVB-T or Analogue (p. 18) Display the menu MENU Select [Setup] select Main Menu access Picture Sound Timer Setup Select [DVB-T Tuning Menu] or [Analogue Tuning Menu] select access DVB-T Tuning Menu Access ■ Analogue Tuning Menu Access To return to TV •...
-
Page 41: Tuning And Editing Channels (Dvb)
Tuning and Editing Channels (DVB) You can retune channels or make your favourite channel lists, skip unwanted channels, etc. Select DVB-C or DVB-T (p. 18) Display the menu MENU Select [Setup] select Main Menu access Picture Sound Timer Setup Select [DVB-C Tuning Menu] or [DVB-T Tuning Menu] select access DVB-C Tuning Menu... - Page 42 • Add it to the Favourites list To add continuous block of channels to the list at once DVB-C Favourites Editor Sorting 123... make the block (yellow) All DVB-C Channels Favourites1 1 BBC One Wales 1 BBC One Wales 7 BBC THREE 14 E4 CBBC Channel 72 Cartoon Nwk...
- Page 43 Set DVB channel manually [Manual Tuning] Normally use [Auto Setup] or [Update Channel List] to retune DVB channels. If tuning has not been done completely or for adjusting the direction of the aerial, use this function. • All channels found will be added to the Channel List. DVB-C : Enter the frequency Select [Start scan]...
-
Page 44: Tuning And Editing Channels (Analogue)
Tuning and Editing Channels (Analogue) You can retune channels or skip unwanted channels, edit channels etc. Select Analogue (p. 18) Display the menu MENU Select [Setup] select Main Menu access Picture Sound Timer Setup Select [Analogue Tuning Menu] select access Analogue Tuning Menu Access Select one of the following functions select... -
Page 45: Fine Tuning
■ To edit channels You can also edit each channel in Channel List. • To retune each channel ([Manual Tuning]) (red) (see below) • To move the channel position Select the new position Store (green) (green) • To rename the channel name Set characters (maximum : five characters) Store BACK/... -
Page 46: Timer Programming
Timer Programming Timer Programming from Menu The Timer Programming menu allows you to choose programmes that you wish to remind watching or record to the external recorder. At the correct time, the TV will tune to the correct channel even if the TV is in Standby mode. TV Guide may also be used to set timer programming event (p. 24). -
Page 47: Set Timer Programming Event Details [Timer Programming
Set timer programming event details [Timer Programming] Start making the settings Select the function ([Ext Rec.] or [Reminder]) select [Ext Rec.] : to record the programme to the external recorder When the start time comes, the channel will be switched automatically and the video and audio signals will be output. 2 minutes before the starting time, a reminder message appears if you are watching TV. -
Page 48: Child Lock
■ ■ To change a timer programming event To record with subtitles (if available) Select the programme to be changed Select the programme to record with subtitles select (yellow) Correct as necessary (p. 46) • Each time pressed : access auto ■... -
Page 49: Control Channel Audience [Child Lock
Control channel audience [Child Lock] Enter the PIN number (4 digits) • Enter the PIN number twice at first setting. Child Lock-PIN Entry • Make a note of the PIN number in case you forget it. Please enter new PIN •... -
Page 50: Input Labels
Input Labels For easier identification and selection of the input mode, you can label each input mode or skip terminal that is not connected to any equipment. • To select the input mode (p. 27) Display the menu MENU Select [Setup] select Main Menu access... -
Page 51: Using Common Interface
Although CI module may enable you to view some services, this TV does not guarantee all services (e.g. encrypted pay-TV channels). Please use only the approved CI module by the broadcaster. Consult your local Panasonic dealer or broadcasters for more information and conditions of the services. CI slot Caution •... -
Page 52: Shipping Condition
Shipping Condition Resets the TV to its original condition, i.e. no channels tuned in. All settings are reset (channels, picture, sound settings, etc.). • To retune TV channels only, e.g. after moving house “Retuning from Setup Menu” (p. 38, 39) Display the menu MENU Select [Setup] select... -
Page 53: Updating The Tv Software
Updating the TV Software From time to time, a new version of software may become available for download to enhance the performance or operations of the TV. If there is an update available, a notification banner is displayed when the channel has the update information. •... -
Page 54: Using Media Player
Using Media Player Media Player allows you to enjoy photo, video or music recorded on an SD Card and a USB Flash Memory. VIERA IMAGE VIEWER is the function of the easy viewing for photos or videos recorded on an SD Card on the TV screen by simply inserting into the SD Card slot. - Page 55 Starting Media Player Insert the SD Card or USB Flash Memory to the TV (p. 53) Start Media Player Media Player Signal output from all AV terminals will be disabled during Media Player view. • Also possible by pressing following buttons. Press OK to proceed.
-
Page 56: Photo Mode
Photo mode Photo mode will read all “.jpg” extension files in the SD Card or USB Flash Memory. The thumbnail of all the photos in the SD Card or USB Flash Memory will be displayed. Example : Thumbnail - [All photos] All photos Media Player Photo... -
Page 57: Photo Settings
[Single view] - Photos are displayed one at a time. Select the file from the thumbnail of photos to be viewed select access Example : • • To display / hide the operation To operate Single view Single view guide To the previous photo Slideshow •... - Page 58 Menu Item Adjustments / Configurations (alternatives) Selects the frame type of the slideshow [Off] / [Multi] / [Collage] / [Drift (+ calendar)] / [Drift] / [Gallery (+ calendar)] / [Gallery] / [Cinema] [Multi] : 9 photos are displayed orderly at once. [Collage] : Each photo is displayed at a random position and random scale.
-
Page 59: Change The Contents
Menu Item Adjustments / Configurations (alternatives) Selects the back ground music during Photo mode [Off] / [Type1] / [Type2] / [Type3] / [User] / [Auto] • [Type1], [Type2] and [Type3] are the fixed music each installed in this TV. [User] : Music data in the device registered by yourself will be played back. To register the music 1. -
Page 60: Video Mode
Video mode • Supported file format (p. 83) The thumbnail of video titles in the SD Card or USB Flash Memory will be displayed. Example : Thumbnail - [Title view] The preview will start when the title is Title view Media Player Video highlighted if it supports a preview. - Page 61 ■ How to operate in the playback Example : Playback • • To display / hide the operation guide and To change aspect information banner ASPECT 19/02/2010 11:21 00:15:39 00:02:05 • To the previous title / • To operate the playback scene Rewind (red)
-
Page 62: Audio Output Settings
Audio output Settings You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function) terminal. • To confirm or change the current sound status “Confirm or change the current status” (p. 60) Display the menu Select [Sound] Select [SPDIF Selection] and set MENU... -
Page 63: Music Setup
■ Playback from File view Selected file will be played back. Select the folder Select the file Start playback Example : Thumbnail - File view (red) Folder view > My Music_1 Media Player Music select access My Song_1 My Song_2 My Song_3 My Song_4 My Song_5... -
Page 64: Using Network Services
Using Network Services VIERA Connect VIERA Connect is a gateway to the internet services unique to Panasonic and has expanded VIERA CAST features greatly. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as photos, videos, games, etc. -
Page 65: Network Setup
Enables to control the TV from the network equipment (Smartphone, etc.) [Off] / [On] • Depending on the area, this function may not be available. For details, consult your Network Remote Control local Panasonic dealer. • For more information of this function, visit the following website. (English only) http://panasonic.jp/support/global/cs/tv/... -
Page 66: Wired Connection Settings
Wired connection settings This setting is for the network connection by using the LAN cable. Select [Network Type] and set to [Wired] select Network Setup Connection Test Network Type Wired access / store Access Point Settings IP/DNS Settings Network Link Settings Software Update MAC Address ab-cd-ef-gh-ij-kl... -
Page 67: Wireless Connection Settings
Select [Connection Test] and access to test select Network Setup Connection Test Access Network Type Wired access Access Point Settings • IP/DNS Settings Performs automatic testing of the network connection for the TV. (It takes a Network Link Settings while to test.) Software Update MAC Address ab-cd-ef-gh-ij-kl... - Page 68 ■ [WPS(Push button)] press the WPS button on the access point until the light flashes WPS(Push button) 1) Please press the ‘WPS’ button on the access point until its light flashes. 2) When the light is flashing select ‘Connect’ on connect the Wireless LAN Adaptor and the access point •...
-
Page 69: Update Tv's Software
Access the encryption key input mode Encryption Key Setting Connection will be made with the following settings:- SSID : Access Point A Authentication type : WPA-PSK • If the selected access point is not encrypted, the confirmation screen will be Encryption type : TKIP displayed. - Page 70 VIERA Connect home screen is subject to change without notice. • The services through VIERA Connect are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services. •...
-
Page 71: Link Functions (Q-Link / Viera Link)
Use fully wired HDMI compliant cable. • Connect the equipment supporting VIERA Link to the TV’s HDMI1, HDMI2 or HDMI3 terminal via an HDMI cable. • About HDMI cable for connecting Panasonic HD Video Camera or LUMIX Camera, read the manual of the equipment. -
Page 72: Viera Link (Hdmi And Audio Out Connections)
VIERA Link (HDMI and Audio out connections) Connected equipment Player theatre with Blu-ray Disc theatre with Amplifier with VIERA Link Features VIERA Link function VIERA Link function function Preset download – – – ∗ ∗ Easy playback – Power on link – Power off link Reduce unnecessary power consumption ∗... -
Page 73: Power Off Link
Q-Link Preparations • Connect the DVD Recorder / VCR with the following logos : “Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC (a trademark of Metz Corporation)”, “Easy Link (a trademark of Philips Corporation)”, “Megalogic (a trademark of Grundig Corporation)”, “SMARTLINK (a trademark of Sony Corporation)” •... -
Page 74: Easy Playback
” ∗ VIERA Link “ ∗ Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function. This TV supports “HDAVI Control 5” function. Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and SCART cables allow you to interface them automatically (p. 70, 71). - Page 75 Reduce unnecessary power consumption in standby [Standby Power Save] Set Standby Power Save [On] in the Setup Menu to use this function [Standby Power Save] (p. 35) The power consumption in Standby mode of the connected equipment is controlled higher or lower in synchronization with the TV On / Off state to reduce the consumption.
- Page 76 Pause Live TV programme [Pause Live TV] You can pause the live TV programme and resume later. Live TV programme will be recorded on HDD of the connected DIGA Recorder. • This function is available with DIGA Recorder which has HDD. •...
- Page 77 Control the menu of the connected equipment by VIERA remote control [VIERA Link Control] You can control some functions of the connected equipment with this TV remote control (point the remote control at the TV’s signal receiver). • If you cannot operate, check the settings and the equipment ...
-
Page 78: Operate The Menu Of The Equipment
Operate the menu of the equipment Available VIERA remote control buttons : (Depending on the connected equipment) Set the position to “TV” DVD/VCR Follow the operation guide • To display the operation guide OPTION If other manufacturers’ equipment is accessed, Setup / Contents Selection menu may be displayed. - Page 79 Speaker control [Speaker Selection] You can control the theatre speaker with this TV remote control (point the remote control at the TV’s signal receiver). • If you cannot operate, check the settings and the equipment “Summary of Q-Link and VIERA Link features” (p. 70, 71), “Preparations” (p. 73) Display [VIERA Link Menu] Select [Speaker Selection] select...
-
Page 80: External Equipment
External Equipment These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment, the table (p. 81), and the specifications (p. 90, 91). To record / playback Terrestrial aerial RF cable DVD Recorder / VCR... -
Page 81: Network (Wired)
Network (wired) Less Less Internet than than 10 cm 10 cm LAN cable Modem Hub or Router Ferrite core (supplied) Installing the Ferrite core Pull back the tabs Wind the cable Press the cable (in two places) twice through and close Side panel of the TV USB devices Wireless LAN Adaptor... - Page 82 Headphones Rear of the TV Side panel of the TV (M3 stereo mini plug) • To adjust volume [Headphone Volume] (p. 33) Types of connectable equipment to each terminal Terminal Recording / Playback (equipment) To record / playback videocassettes / DVDs (VCR / DVD Recorder) ∗...
-
Page 83: Technical Information
Technical Information Auto Aspect The optimum size and aspect can be chosen automatically, and you can enjoy finer images. (p. 21) Aspect Control Signal [WIDE] will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART / HDMI terminal is found. -
Page 84: Supported File Format In Media Player
For details, read the manual of the Dolby Digital products. Linear PCM (RAW / TWOS / SOWT) • MotionJPEG This TV supports Motion JPEG recorded .mov by Panasonic LUMIX Camera ∗ H.264 BP / MP / HP Dolby Digital MPEG .mpg MPEG1 – .mpeg MPEG2 Linear PCM ∗... - Page 85 ■ Music Codec File extension Restrictions .mp3 – • .m4a Copy-protected files cannot be played back. • Copy-protected files cannot be played back. .wma • WMA Pro and WMA Lossless are not supported. Note • Some files may not be played back even if they fulfill these conditions. •...
-
Page 86: Devices For Recording Or Playing Back
• Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the TV. (Panasonic is not liable for any deterioration or damage of recorded data.) SCART and HDMI terminal information AV1 SCART terminal (RGB, VIDEO, Q-Link) -
Page 87: Hdmi Connection
HDMI connection HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non- compression standard. HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment. HDMI-compatible equipment ∗ with an HDMI or DVI output terminal, such as a DVD player, a set top box or a game equipment, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable. -
Page 88: Usb Connection
You cannot use two or more same kind of USB devices simultaneously except USB Flash Memory. • Additional information for USB devices may be on the following website. (English only) http://panasonic.jp/support/global/cs/tv/ USB Keyboard • The USB Keyboard which requires the driver is not supported. -
Page 89: Faqs
Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Block noise, frozen or disappearing image occurs in DVB mode / White spots or shadow image (ghosting) occurs in Analogue mode / Some channels cannot be tuned... - Page 90 TV Off with Mains power On / Off switch, then turn it On again. appears • Check if foreign objects are inside the USB port. • Follow the message’s instructions. • An error message appears If the problem persists, contact your local Panasonic dealer or the authorized Service Centre.
-
Page 91: Specifications
Playback of NTSC tape from some PAL Video recorders (VCR) following website. (English only) M.NTSC Playback from M.NTSC Video recorders (VCR) http://panasonic.jp/support/ NTSC (AV input only) Playback from NTSC Video recorders (VCR) global/cs/tv/ DVB-T Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264)) DVB-C Digital cable services (MPEG2 and MPEG4-AVC(H.264)) -
Page 92: Licence
LLC in the United States and other countries. • HDAVI Control™ is a trademark of Panasonic Corporation. • “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. • x.v.Colour™ is a trademark. • Manufactured under license from Dolby Laboratories.